Hi. (I have not been able to find a maintainer for this code.) The following patch makes drivers/scsi/mvme147.c check the return code from request_irq and scsi_register. It applies cleanly against 240p3 and ac9. Please comment. --- linux/drivers/scsi/mvme147.c Tue Nov 28 02:57:34 2000 +++ linux-ac9/drivers/scsi/mvme147.c Wed Jan 17 22:40:08 2001 @@ -74,13 +74,18 @@ tpnt->proc_info = &wd33c93_proc_info; mvme147_host = scsi_register (tpnt, sizeof(struct WD33C93_hostdata)); + if (!mvme147_host) + goto err_out; + mvme147_host->base = 0xfffe4000; mvme147_host->irq = MVME147_IRQ_SCSI_PORT; wd33c93_init(mvme147_host, (wd33c93_regs *)0xfffe4000, dma_setup, dma_stop, WD33C93_FS_8_10); - request_irq(MVME147_IRQ_SCSI_PORT, mvme147_intr, 0, "MVME147 SCSI PORT", mvme147_intr); - request_irq(MVME147_IRQ_SCSI_DMA, mvme147_intr, 0, "MVME147 SCSI DMA", mvme147_intr); + if (request_irq(MVME147_IRQ_SCSI_PORT, mvme147_intr, 0, "MVME147 SCSI PORT", +mvme147_intr)) + goto err_unregister; + if (request_irq(MVME147_IRQ_SCSI_DMA, mvme147_intr, 0, "MVME147 SCSI DMA", +mvme147_intr)) + goto err_free_irq; #if 0 /* Disabled; causes problems booting */ m147_pcc->scsi_interrupt = 0x10; /* Assert SCSI bus reset */ udelay(100); @@ -94,6 +99,14 @@ m147_pcc->dma_intr = 0x89; /* Ack and enable ints */ return 1; + + err_free_irq: + free_irq(MVME147_IRQ_SCSI_PORT, mvme147_intr); + err_unregister: + wd33c93_release(); + scsi_unregister(mvme147_host); + err_out: + return 0; } #define HOSTS_C -- Regards, Rasmus([EMAIL PROTECTED]) "I begin by taking. I shall find scholars later to demonstrate my perfect right." - Frederick (II) the Great - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [EMAIL PROTECTED] Please read the FAQ at http://www.tux.org/lkml/