From: Hans Verkuil <hverkuil-ci...@xs4all.nl>
commit 45ba1c0ba3e589ad3ef0d0603c822eb27ea16563 upstream.
Starting with firmware version 10 the GET/SET_HDMI_VERSION message
was removed and GET/SET_AUTO_POWER_ON was added.
The removal of GET/SET_HDMI_VERSION caused the probe of the
Pulse-Eight to fail. Add a version check to handle this gracefully.
Also show (but do not set) the Auto Power On value.
Signed-off-by: Hans Verkuil <hverkuil-ci...@xs4all.nl>
Reported-by: Maxime Ripard <mrip...@kernel.org>
Tested-by: Maxime Ripard <mrip...@kernel.org>
Cc: <sta...@vger.kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+hua...@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gre...@linuxfoundation.org>
---
drivers/media/cec/usb/pulse8/pulse8-cec.c | 43 ++++++++++++++++++++----------
1 file changed, 30 insertions(+), 13 deletions(-)
--- a/drivers/media/cec/usb/pulse8/pulse8-cec.c
+++ b/drivers/media/cec/usb/pulse8/pulse8-cec.c
@@ -88,13 +88,15 @@ enum pulse8_msgcodes {
MSGCODE_SET_PHYSICAL_ADDRESS, /* 0x20 */
MSGCODE_GET_DEVICE_TYPE,
MSGCODE_SET_DEVICE_TYPE,
- MSGCODE_GET_HDMI_VERSION,
+ MSGCODE_GET_HDMI_VERSION, /* Removed in FW >= 10 */
MSGCODE_SET_HDMI_VERSION,
MSGCODE_GET_OSD_NAME,
MSGCODE_SET_OSD_NAME,
MSGCODE_WRITE_EEPROM,
MSGCODE_GET_ADAPTER_TYPE, /* 0x28 */
MSGCODE_SET_ACTIVE_SOURCE,
+ MSGCODE_GET_AUTO_POWER_ON, /* New for FW >= 10 */
+ MSGCODE_SET_AUTO_POWER_ON,
MSGCODE_FRAME_EOM = 0x80,
MSGCODE_FRAME_ACK = 0x40,
@@ -143,6 +145,8 @@ static const char * const pulse8_msgname
"WRITE_EEPROM",
"GET_ADAPTER_TYPE",
"SET_ACTIVE_SOURCE",
+ "GET_AUTO_POWER_ON",
+ "SET_AUTO_POWER_ON",
};
static const char *pulse8_msgname(u8 cmd)
@@ -579,12 +583,14 @@ static int pulse8_cec_adap_log_addr(stru
if (err)
goto unlock;
- cmd[0] = MSGCODE_SET_HDMI_VERSION;
- cmd[1] = adap->log_addrs.cec_version;
- err = pulse8_send_and_wait(pulse8, cmd, 2,
- MSGCODE_COMMAND_ACCEPTED, 0);
- if (err)
- goto unlock;
+ if (pulse8->vers < 10) {
+ cmd[0] = MSGCODE_SET_HDMI_VERSION;
+ cmd[1] = adap->log_addrs.cec_version;
+ err = pulse8_send_and_wait(pulse8, cmd, 2,
+ MSGCODE_COMMAND_ACCEPTED, 0);
+ if (err)
+ goto unlock;
+ }
if (adap->log_addrs.osd_name[0]) {
size_t osd_len = strlen(adap->log_addrs.osd_name);
@@ -691,6 +697,14 @@ static int pulse8_setup(struct pulse8 *p
dev_dbg(pulse8->dev, "Autonomous mode: %s",
data[0] ? "on" : "off");
+ if (pulse8->vers >= 10) {
+ cmd[0] = MSGCODE_GET_AUTO_POWER_ON;
+ err = pulse8_send_and_wait(pulse8, cmd, 1, cmd[0], 1);
+ if (!err)
+ dev_dbg(pulse8->dev, "Auto Power On: %s",
+ data[0] ? "on" : "off");
+ }
+
cmd[0] = MSGCODE_GET_DEVICE_TYPE;
err = pulse8_send_and_wait(pulse8, cmd, 1, cmd[0], 1);
if (err)
@@ -752,12 +766,15 @@ static int pulse8_setup(struct pulse8 *p
dev_dbg(pulse8->dev, "Physical address: %x.%x.%x.%x\n",
cec_phys_addr_exp(*pa));
- cmd[0] = MSGCODE_GET_HDMI_VERSION;
- err = pulse8_send_and_wait(pulse8, cmd, 1, cmd[0], 1);
- if (err)
- return err;
- log_addrs->cec_version = data[0];
- dev_dbg(pulse8->dev, "CEC version: %d\n", log_addrs->cec_version);
+ log_addrs->cec_version = CEC_OP_CEC_VERSION_1_4;
+ if (pulse8->vers < 10) {
+ cmd[0] = MSGCODE_GET_HDMI_VERSION;
+ err = pulse8_send_and_wait(pulse8, cmd, 1, cmd[0], 1);
+ if (err)
+ return err;
+ log_addrs->cec_version = data[0];
+ dev_dbg(pulse8->dev, "CEC version: %d\n",
log_addrs->cec_version);
+ }
cmd[0] = MSGCODE_GET_OSD_NAME;
err = pulse8_send_and_wait(pulse8, cmd, 1, cmd[0], 0);
