Check that the e100 is in the D0 power state. If it's not, it won't
respond to MMIO accesses and we end up with master-abort machine
checks on some platforms.
Signed-off-by: Ivan Kokshaysky <[EMAIL PROTECTED]>
---
drivers/pci/quirks.c | 14 +++++++++++++-
1 files changed, 13 insertions(+), 1 deletions(-)
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index 26cc4dc..c8b2b9d 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -1406,9 +1406,10 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NETMOS,
PCI_ANY_ID, quirk_netmos);
static void __devinit quirk_e100_interrupt(struct pci_dev *dev)
{
- u16 command;
+ u16 command, pmcsr;
u8 __iomem *csr;
u8 cmd_hi;
+ int pm;
switch (dev->device) {
/* PCI IDs taken from drivers/net/e100.c */
@@ -1442,6 +1443,17 @@ static void __devinit quirk_e100_interrupt(struct
pci_dev *dev)
if (!(command & PCI_COMMAND_MEMORY) || !pci_resource_start(dev, 0))
return;
+ /*
+ * Check that the device is in the D0 power state. If it's not,
+ * there is no point to look any further.
+ */
+ pm = pci_find_capability(dev, PCI_CAP_ID_PM);
+ if (pm) {
+ pci_read_config_word(dev, pm + PCI_PM_CTRL, &pmcsr);
+ if ((pmcsr & PCI_PM_CTRL_STATE_MASK) != PCI_D0)
+ return;
+ }
+
/* Convert from PCI bus to resource space. */
csr = ioremap(pci_resource_start(dev, 0), 8);
if (!csr) {
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
