From: Fugang Duan <fugang.d...@nxp.com>
[ Upstream commit 5f58591323bf3f342920179f24515935c4b5fd60 ]
There have chance to re-enable the eee_ctrl_timer and fire the timer
in napi callback after delete the timer in .stmmac_release(), which
introduces to access eee registers in the timer function after clocks
are disabled then causes system hang. Found this issue when do
suspend/resume and reboot stress test.
It is safe to delete the timer after napi disabled and disable lpi mode.
Fixes: d765955d2ae0b ("stmmac: add the Energy Efficient Ethernet support")
Signed-off-by: Fugang Duan <fugang.d...@nxp.com>
Signed-off-by: Joakim Zhang <qiangqing.zh...@nxp.com>
Signed-off-by: David S. Miller <da...@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gre...@linuxfoundation.org>
---
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 13 ++++++++++---
1 file changed, 10 insertions(+), 3 deletions(-)
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -2758,9 +2758,6 @@ static int stmmac_release(struct net_dev
struct stmmac_priv *priv = netdev_priv(dev);
u32 chan;
- if (priv->eee_enabled)
- del_timer_sync(&priv->eee_ctrl_timer);
-
/* Stop and disconnect the PHY */
phylink_stop(priv->phylink);
phylink_disconnect_phy(priv->phylink);
@@ -2777,6 +2774,11 @@ static int stmmac_release(struct net_dev
if (priv->lpi_irq > 0)
free_irq(priv->lpi_irq, dev);
+ if (priv->eee_enabled) {
+ priv->tx_path_in_lpi_mode = false;
+ del_timer_sync(&priv->eee_ctrl_timer);
+ }
+
/* Stop TX/RX DMA and clear the descriptors */
stmmac_stop_all_dma(priv);
@@ -4761,6 +4763,11 @@ int stmmac_suspend(struct device *dev)
for (chan = 0; chan < priv->plat->tx_queues_to_use; chan++)
del_timer_sync(&priv->tx_queue[chan].txtimer);
+ if (priv->eee_enabled) {
+ priv->tx_path_in_lpi_mode = false;
+ del_timer_sync(&priv->eee_ctrl_timer);
+ }
+
/* Stop TX/RX DMA */
stmmac_stop_all_dma(priv);
