There are a log of "#if 0" or "#if 1" in comedi driver which
cause warning when running checkpatch.pl, they are supposed to
be cleaned up before release.
Signed-off-by: chensong <chensong_2...@189.cn>
---
drivers/staging/comedi/drivers/cb_pcidas64.c | 95 --------------------------
drivers/staging/comedi/drivers/dt2801.c | 29 --------
drivers/staging/comedi/drivers/ni_atmio16d.c | 9 ---
drivers/staging/comedi/drivers/ni_mio_common.c | 37 +---------
drivers/staging/comedi/drivers/ni_mio_cs.c | 10 ---
drivers/staging/comedi/drivers/ni_pcidio.c | 5 --
drivers/staging/comedi/drivers/ni_pcimio.c | 48 -------------
drivers/staging/comedi/drivers/s526.c | 49 -------------
drivers/staging/comedi/drivers/s626.c | 45 ------------
9 files changed, 1 insertion(+), 326 deletions(-)
diff --git a/drivers/staging/comedi/drivers/cb_pcidas64.c
b/drivers/staging/comedi/drivers/cb_pcidas64.c
index fa987bb..2d74ec9 100644
--- a/drivers/staging/comedi/drivers/cb_pcidas64.c
+++ b/drivers/staging/comedi/drivers/cb_pcidas64.c
@@ -998,101 +998,6 @@ static const struct pcidas64_board pcidas64_boards[] = {
.ai_fifo = &ai_fifo_4020,
.has_8255 = 1,
},
-#if 0
- /* The device id for these boards is unknown */
-
- [BOARD_PCIDAS6402_16_JR] = {
- .name = "pci-das6402/16/jr",
- .ai_se_chans = 64,
- .ai_bits = 16,
- .ai_speed = 5000,
- .ao_nchan = 0,
- .ao_scan_speed = 10000,
- .layout = LAYOUT_64XX,
- .ai_range_table = &ai_ranges_64xx,
- .ai_range_code = ai_range_code_64xx,
- .ai_fifo = ai_fifo_64xx,
- .has_8255 = 1,
- },
- [BOARD_PCIDAS64_M1_16_JR] = {
- .name = "pci-das64/m1/16/jr",
- .ai_se_chans = 64,
- .ai_bits = 16,
- .ai_speed = 1000,
- .ao_nchan = 0,
- .ao_scan_speed = 10000,
- .layout = LAYOUT_64XX,
- .ai_range_table = &ai_ranges_64_mx,
- .ai_range_code = ai_range_code_64_mx,
- .ai_fifo = ai_fifo_64xx,
- .has_8255 = 1,
- },
- [BOARD_PCIDAS64_M2_16_JR] = {
- .name = "pci-das64/m2/16/jr",
- .ai_se_chans = 64,
- .ai_bits = 16,
- .ai_speed = 500,
- .ao_nchan = 0,
- .ao_scan_speed = 10000,
- .layout = LAYOUT_64XX,
- .ai_range_table = &ai_ranges_64_mx,
- .ai_range_code = ai_range_code_64_mx,
- .ai_fifo = ai_fifo_64xx,
- .has_8255 = 1,
- },
- [BOARD_PCIDAS64_M3_16_JR] = {
- .name = "pci-das64/m3/16/jr",
- .ai_se_chans = 64,
- .ai_bits = 16,
- .ai_speed = 333,
- .ao_nchan = 0,
- .ao_scan_speed = 10000,
- .layout = LAYOUT_64XX,
- .ai_range_table = &ai_ranges_64_mx,
- .ai_range_code = ai_range_code_64_mx,
- .ai_fifo = ai_fifo_64xx,
- .has_8255 = 1,
- },
- [BOARD_PCIDAS64_M1_14] = {
- .name = "pci-das64/m1/14",
- .ai_se_chans = 64,
- .ai_bits = 14,
- .ai_speed = 1000,
- .ao_nchan = 2,
- .ao_scan_speed = 10000,
- .layout = LAYOUT_64XX,
- .ai_range_table = &ai_ranges_64_mx,
- .ai_range_code = ai_range_code_64_mx,
- .ai_fifo = ai_fifo_64xx,
- .has_8255 = 1,
- },
- [BOARD_PCIDAS64_M2_14] = {
- .name = "pci-das64/m2/14",
- .ai_se_chans = 64,
- .ai_bits = 14,
- .ai_speed = 500,
- .ao_nchan = 2,
- .ao_scan_speed = 10000,
- .layout = LAYOUT_64XX,
- .ai_range_table = &ai_ranges_64_mx,
- .ai_range_code = ai_range_code_64_mx,
- .ai_fifo = ai_fifo_64xx,
- .has_8255 = 1,
- },
- [BOARD_PCIDAS64_M3_14] = {
- .name = "pci-das64/m3/14",
- .ai_se_chans = 64,
- .ai_bits = 14,
- .ai_speed = 333,
- .ao_nchan = 2,
- .ao_scan_speed = 10000,
- .layout = LAYOUT_64XX,
- .ai_range_table = &ai_ranges_64_mx,
- .ai_range_code = ai_range_code_64_mx,
- .ai_fifo = ai_fifo_64xx,
- .has_8255 = 1,
- },
-#endif
};
static inline unsigned short se_diff_bit_6xxx(struct comedi_device *dev,
diff --git a/drivers/staging/comedi/drivers/dt2801.c
b/drivers/staging/comedi/drivers/dt2801.c
index 0d571d8..bb01416 100644
--- a/drivers/staging/comedi/drivers/dt2801.c
+++ b/drivers/staging/comedi/drivers/dt2801.c
@@ -87,17 +87,6 @@
#define DT2801_STATUS 1
#define DT2801_CMD 1
-#if 0
-/* ignore 'defined but not used' warning */
-static const struct comedi_lrange range_dt2801_ai_pgh_bipolar = {
- 4, {
- BIP_RANGE(10),
- BIP_RANGE(5),
- BIP_RANGE(2.5),
- BIP_RANGE(1.25)
- }
-};
-#endif
static const struct comedi_lrange range_dt2801_ai_pgl_bipolar = {
4, {
BIP_RANGE(10),
@@ -107,17 +96,6 @@ static const struct comedi_lrange
range_dt2801_ai_pgl_bipolar = {
}
};
-#if 0
-/* ignore 'defined but not used' warning */
-static const struct comedi_lrange range_dt2801_ai_pgh_unipolar = {
- 4, {
- UNI_RANGE(10),
- UNI_RANGE(5),
- UNI_RANGE(2.5),
- UNI_RANGE(1.25)
- }
-};
-#endif
static const struct comedi_lrange range_dt2801_ai_pgl_unipolar = {
4, {
UNI_RANGE(10),
@@ -580,14 +558,7 @@ static int dt2801_attach(struct comedi_device *dev, struct
comedi_devconfig *it)
/* ai subdevice */
s->type = COMEDI_SUBD_AI;
s->subdev_flags = SDF_READABLE | SDF_GROUND;
-#if 1
s->n_chan = n_ai_chans;
-#else
- if (it->options[2])
- s->n_chan = board->ad_chan;
- else
- s->n_chan = board->ad_chan / 2;
-#endif
s->maxdata = (1 << board->adbits) - 1;
s->range_table = ai_range_lkup(board->adrangetype, it->options[3]);
s->insn_read = dt2801_ai_insn_read;
diff --git a/drivers/staging/comedi/drivers/ni_atmio16d.c
b/drivers/staging/comedi/drivers/ni_atmio16d.c
index dffce1a..972e220 100644
--- a/drivers/staging/comedi/drivers/ni_atmio16d.c
+++ b/drivers/staging/comedi/drivers/ni_atmio16d.c
@@ -685,15 +685,6 @@ static int atmio16d_attach(struct comedi_device *dev,
s->type = COMEDI_SUBD_UNUSED;
}
-/* don't yet know how to deal with counter/timers */
-#if 0
- s = &dev->subdevices[4];
- /* do */
- s->type = COMEDI_SUBD_TIMER;
- s->n_chan = 0;
- s->maxdata = 0
-#endif
-
return 0;
}
diff --git a/drivers/staging/comedi/drivers/ni_mio_common.c
b/drivers/staging/comedi/drivers/ni_mio_common.c
index 4f80a49..85ab35ed 100644
--- a/drivers/staging/comedi/drivers/ni_mio_common.c
+++ b/drivers/staging/comedi/drivers/ni_mio_common.c
@@ -795,18 +795,6 @@ static void ni_clear_ai_fifo(struct comedi_device *dev)
if (devpriv->is_625x) {
ni_writeb(dev, 0, NI_M_STATIC_AI_CTRL_REG(0));
ni_writeb(dev, 1, NI_M_STATIC_AI_CTRL_REG(0));
-#if 0
- /*
- * The NI example code does 3 convert pulses for 625x
- * boards, But that appears to be wrong in practice.
- */
- ni_stc_writew(dev, NISTC_AI_CMD1_CONVERT_PULSE,
- NISTC_AI_CMD1_REG);
- ni_stc_writew(dev, NISTC_AI_CMD1_CONVERT_PULSE,
- NISTC_AI_CMD1_REG);
- ni_stc_writew(dev, NISTC_AI_CMD1_CONVERT_PULSE,
- NISTC_AI_CMD1_REG);
-#endif
}
}
}
@@ -2930,21 +2918,7 @@ static void ni_ao_cmd_personalize(struct comedi_device
*dev,
(board->ao_fifo_depth ?
NISTC_AO_PERSONAL_FIFO_ENA : NISTC_AO_PERSONAL_DMA_PIO_CTRL)
;
-#if 0
- /*
- * FIXME:
- * add something like ".has_individual_dacs = 0" to ni_board_struct
- * since, as F Hess pointed out, not all in m series have singles. not
- * sure if e-series all have duals...
- */
- /*
- * F Hess: windows driver does not set NISTC_AO_PERSONAL_NUM_DAC bit for
- * 6281, verified with bus analyzer.
- */
- if (devpriv->is_m_series)
- bits |= NISTC_AO_PERSONAL_NUM_DAC;
-#endif
ni_stc_writew(dev, bits, NISTC_AO_PERSONAL_REG);
ni_stc_writew(dev, NISTC_RESET_AO_CFG_END, NISTC_RESET_REG);
@@ -4857,21 +4831,12 @@ static int init_cs5529(struct comedi_device *dev)
unsigned int config_bits = CS5529_CFG_PORT_FLAG |
CS5529_CFG_WORD_RATE_2180;
-#if 1
/* do self-calibration */
cs5529_config_write(dev, config_bits | CS5529_CFG_CALIB_BOTH_SELF,
CS5529_CFG_REG);
/* need to force a conversion for calibration to run */
cs5529_do_conversion(dev, NULL);
-#else
- /* force gain calibration to 1 */
- cs5529_config_write(dev, 0x400000, CS5529_GAIN_REG);
- cs5529_config_write(dev, config_bits | CS5529_CFG_CALIB_OFFSET_SELF,
- CS5529_CFG_REG);
- if (cs5529_wait_for_idle(dev))
- dev_err(dev->class_dev,
- "timeout or signal in %s\n", __func__);
-#endif
+
return 0;
}
diff --git a/drivers/staging/comedi/drivers/ni_mio_cs.c
b/drivers/staging/comedi/drivers/ni_mio_cs.c
index 4f37b4e..7abd64b 100644
--- a/drivers/staging/comedi/drivers/ni_mio_cs.c
+++ b/drivers/staging/comedi/drivers/ni_mio_cs.c
@@ -100,16 +100,6 @@ static const struct ni_board_struct ni_boards[] = {
.ao_speed = 1000000,
.caldac = { ad8804_debug },
},
-#if 0
- {
- .name = "DAQCard-6715",
- .device_id = 0x0000, /* unknown */
- .n_aochan = 8,
- .ao_maxdata = 0x0fff,
- .ao_671x = 8192,
- .caldac = { mb88341, mb88341 },
- },
-#endif
};
#include "ni_mio_common.c"
diff --git a/drivers/staging/comedi/drivers/ni_pcidio.c
b/drivers/staging/comedi/drivers/ni_pcidio.c
index 623f8d0..579d8eb 100644
--- a/drivers/staging/comedi/drivers/ni_pcidio.c
+++ b/drivers/staging/comedi/drivers/ni_pcidio.c
@@ -455,11 +455,6 @@ static irqreturn_t nidio_interrupt(int irq, void *d)
out:
comedi_handle_events(dev, s);
-#if 0
- if (!tag)
- writeb(0x03, dev->mmio + MASTER_DMA_AND_INTERRUPT_CONTROL);
-#endif
-
spin_unlock(&dev->spinlock);
return IRQ_HANDLED;
}
diff --git a/drivers/staging/comedi/drivers/ni_pcimio.c
b/drivers/staging/comedi/drivers/ni_pcimio.c
index 6c813a4..8b716ed 100644
--- a/drivers/staging/comedi/drivers/ni_pcimio.c
+++ b/drivers/staging/comedi/drivers/ni_pcimio.c
@@ -481,43 +481,6 @@ static const struct ni_board_struct ni_boards[] = {
.ao_speed = 250,
.caldac = { ad8804, ad8804 },
},
-#if 0
- /* The 6115 boards probably need their own driver */
- [BOARD_PCI6115] = { /* .device_id = 0x2ed0, */
- .name = "pci-6115",
- .n_adchan = 4,
- .ai_maxdata = 0x0fff,
- .ai_fifo_depth = 8192,
- .gainlkup = ai_gain_611x,
- .ai_speed = 100,
- .n_aochan = 2,
- .ao_maxdata = 0xffff,
- .ao_671x = 1,
- .ao_fifo_depth = 2048,
- .ao_speed = 250,
- .reg_611x = 1,
- /* XXX */
- .caldac = { ad8804_debug, ad8804_debug, ad8804_debug },
- },
-#endif
-#if 0
- [BOARD_PXI6115] = { /* .device_id = ????, */
- .name = "pxi-6115",
- .n_adchan = 4,
- .ai_maxdata = 0x0fff,
- .ai_fifo_depth = 8192,
- .gainlkup = ai_gain_611x,
- .ai_speed = 100,
- .n_aochan = 2,
- .ao_maxdata = 0xffff,
- .ao_671x = 1,
- .ao_fifo_depth = 2048,
- .ao_speed = 250,
- .reg_611x = 1,
- /* XXX */
- .caldac = { ad8804_debug, ad8804_debug, ad8804_debug },
- },
-#endif
[BOARD_PCI6711] = {
.name = "pci-6711",
.n_aochan = 4,
@@ -569,17 +532,6 @@ static const struct ni_board_struct ni_boards[] = {
.reg_type = ni_reg_6711,
.caldac = { ad8804_debug },
},
-#if 0
- [BOARD_PXI6731] = { /* .device_id = ????, */
- .name = "pxi-6731",
- .n_aochan = 4,
- .ao_maxdata = 0xffff,
- .ao_fifo_depth = 8192,
- .ao_range_table = &range_bipolar10,
- .reg_type = ni_reg_6711,
- .caldac = { ad8804_debug },
- },
-#endif
[BOARD_PCI6733] = {
.name = "pci-6733",
.n_aochan = 8,
diff --git a/drivers/staging/comedi/drivers/s526.c
b/drivers/staging/comedi/drivers/s526.c
index 085cf5b..7f3c59e 100644
--- a/drivers/staging/comedi/drivers/s526.c
+++ b/drivers/staging/comedi/drivers/s526.c
@@ -229,7 +229,6 @@ static int s526_gpct_insn_config(struct comedi_device *dev,
*/
devpriv->gpct_config[chan] = data[0];
-#if 1
/* Set Counter Mode Register */
val = data[1] & 0xffff;
outw(val, dev->iobase + S526_GPCT_MODE_REG(chan));
@@ -246,54 +245,6 @@ static int s526_gpct_insn_config(struct comedi_device *dev,
* dev->iobase + S526_GPCT_CTRL_REG(chan));
*/
}
-#else
- val = S526_GPCT_MODE_CTDIR_CTRL_QUAD;
-
- /* data[1] contains GPCT_X1, GPCT_X2 or GPCT_X4 */
- if (data[1] == GPCT_X2)
- val |= S526_GPCT_MODE_CLK_SRC_QUADX2;
- else if (data[1] == GPCT_X4)
- val |= S526_GPCT_MODE_CLK_SRC_QUADX4;
- else
- val |= S526_GPCT_MODE_CLK_SRC_QUADX1;
-
- /* When to take into account the indexpulse: */
- /*
- * if (data[2] == GPCT_IndexPhaseLowLow) {
- * } else if (data[2] == GPCT_IndexPhaseLowHigh) {
- * } else if (data[2] == GPCT_IndexPhaseHighLow) {
- * } else if (data[2] == GPCT_IndexPhaseHighHigh) {
- * }
- */
- /* Take into account the index pulse? */
- if (data[3] == GPCT_RESET_COUNTER_ON_INDEX) {
- /* Auto load with INDEX^ */
- val |= S526_GPCT_MODE_AUTOLOAD_IXRISE;
- }
-
- /* Set Counter Mode Register */
- val = data[1] & 0xffff;
- outw(val, dev->iobase + S526_GPCT_MODE_REG(chan));
-
- /* Load the pre-load register */
- s526_gpct_write(dev, chan, data[2]);
-
- /* Write the Counter Control Register */
- if (data[3])
- outw(data[3] & 0xffff,
- dev->iobase + S526_GPCT_CTRL_REG(chan));
-
- /* Reset the counter if it is software preload */
- if ((val & S526_GPCT_MODE_AUTOLOAD_MASK) ==
- S526_GPCT_MODE_AUTOLOAD_NONE) {
- /* Reset the counter */
- outw(S526_GPCT_CTRL_CT_RESET,
- dev->iobase + S526_GPCT_CTRL_REG(chan));
- /* Load the counter from PR0 */
- outw(S526_GPCT_CTRL_CT_LOAD,
- dev->iobase + S526_GPCT_CTRL_REG(chan));
- }
-#endif
break;
case INSN_CONFIG_GPCT_SINGLE_PULSE_GENERATOR:
diff --git a/drivers/staging/comedi/drivers/s626.c
b/drivers/staging/comedi/drivers/s626.c
index e7aba93..5ff33c4 100644
--- a/drivers/staging/comedi/drivers/s626.c
+++ b/drivers/staging/comedi/drivers/s626.c
@@ -2255,51 +2255,6 @@ static int s626_initialize(struct comedi_device *dev)
/* Disable RPS timeouts */
writel(0, dev->mmio + S626_P_RPS1_TOUT);
-#if 0
- /*
- * SAA7146 BUG WORKAROUND
- *
- * Initialize SAA7146 ADC interface to a known state by
- * invoking ADCs until FB BUFFER 1 register shows that it
- * is correctly receiving ADC data. This is necessary
- * because the SAA7146 ADC interface does not start up in
- * a defined state after a PCI reset.
- */
- {
- struct comedi_subdevice *s = dev->read_subdev;
- u8 poll_list;
- u16 adc_data;
- u16 start_val;
- u16 index;
- unsigned int data[16];
-
- /* Create a simple polling list for analog input channel 0 */
- poll_list = S626_EOPL;
- s626_reset_adc(dev, &poll_list);
-
- /* Get initial ADC value */
- s626_ai_rinsn(dev, s, NULL, data);
- start_val = data[0];
-
- /*
- * VERSION 2.01 CHANGE: TIMEOUT ADDED TO PREVENT HANGED
- * EXECUTION.
- *
- * Invoke ADCs until the new ADC value differs from the initial
- * value or a timeout occurs. The timeout protects against the
- * possibility that the driver is restarting and the ADC data is
- * a fixed value resulting from the applied ADC analog input
- * being unusually quiet or at the rail.
- */
- for (index = 0; index < 500; index++) {
- s626_ai_rinsn(dev, s, NULL, data);
- adc_data = data[0];
- if (adc_data != start_val)
- break;
- }
- }
-#endif /* SAA7146 BUG WORKAROUND */
-
/*
* Initialize the DAC interface
*/
--
2.7.4
