On Wed, Dec 23, 2020 at 01:42:43PM +0000, Timon Baetz wrote: > Add maxim,max8997-battery and maxim,max8997-muic optional nodes. > > Signed-off-by: Timon Baetz <timon.ba...@protonmail.com>
I already acked this, why did you skip my tag? Best regards, Krzysztof > --- > .../bindings/regulator/max8997-regulator.txt | 12 ++++++++++++ > 1 file changed, 12 insertions(+) > > diff --git > a/Documentation/devicetree/bindings/regulator/max8997-regulator.txt > b/Documentation/devicetree/bindings/regulator/max8997-regulator.txt > index 6fe825b8ac1b..faaf2bbf0272 100644 > --- a/Documentation/devicetree/bindings/regulator/max8997-regulator.txt > +++ b/Documentation/devicetree/bindings/regulator/max8997-regulator.txt > @@ -53,6 +53,18 @@ Additional properties required if either of the optional > properties are used: > - max8997,pmic-buck125-dvs-gpios: GPIO specifiers for three host gpio's used > for dvs. The format of the gpio specifier depends in the gpio controller. > > +Optional nodes: > +- charger: Node for configuring the charger driver. > + Required properties: > + - compatible: "maxim,max8997-battery" > + Optional properties: > + - extcon: extcon specifier for charging events > + - charger-supply: regulator node for charging current > + > +- muic: Node used only by extcon consumers. > + Required properties: > + - compatible: "maxim,max8997-muic" > + > Regulators: The regulators of max8997 that have to be instantiated should be > included in a sub-node named 'regulators'. Regulator nodes included in this > sub-node should be of the format as listed below. > -- > 2.25.1 > >
