Convert MIPI DSI PHY binding to YAML schema mediatek,dsi-phy.yaml Cc: Chun-Kuang Hu <chunkuang...@kernel.org> Cc: Philipp Zabel <p.za...@pengutronix.de> Signed-off-by: Chunfeng Yun <chunfeng....@mediatek.com> Reviewed-by: Rob Herring <r...@kernel.org> Reviewed-by: Chun-Kuang Hu <chunkuang...@kernel.org> --- v5: add Reviewed-by Rob & Chun-Kuang
v4: 1. add maintainer Philipp add support mt8183 suggested by Chun-Kuang 2. use keyword multipleOf suggested by Rob 3. fix typo of 'MIPI' in title v3: new patch --- .../display/mediatek/mediatek,dsi.txt | 18 +--- .../bindings/phy/mediatek,dsi-phy.yaml | 85 +++++++++++++++++++ 2 files changed, 86 insertions(+), 17 deletions(-) create mode 100644 Documentation/devicetree/bindings/phy/mediatek,dsi-phy.yaml diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt b/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt index f06f24d405a5..8238a86686be 100644 --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt @@ -22,23 +22,7 @@ Required properties: MIPI TX Configuration Module ============================ -The MIPI TX configuration module controls the MIPI D-PHY. - -Required properties: -- compatible: "mediatek,<chip>-mipi-tx" -- the supported chips are mt2701, 7623, mt8173 and mt8183. -- reg: Physical base address and length of the controller's registers -- clocks: PLL reference clock -- clock-output-names: name of the output clock line to the DSI encoder -- #clock-cells: must be <0>; -- #phy-cells: must be <0>. - -Optional properties: -- drive-strength-microamp: adjust driving current, should be 3000 ~ 6000. And - the step is 200. -- nvmem-cells: A phandle to the calibration data provided by a nvmem device. If - unspecified default values shall be used. -- nvmem-cell-names: Should be "calibration-data" +See phy/mediatek,dsi-phy.yaml Example: diff --git a/Documentation/devicetree/bindings/phy/mediatek,dsi-phy.yaml b/Documentation/devicetree/bindings/phy/mediatek,dsi-phy.yaml new file mode 100644 index 000000000000..71d4acea1f66 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/mediatek,dsi-phy.yaml @@ -0,0 +1,85 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (c) 2020 MediaTek +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/mediatek,dsi-phy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek MIPI Display Serial Interface (DSI) PHY binding + +maintainers: + - Chun-Kuang Hu <chunkuang...@kernel.org> + - Philipp Zabel <p.za...@pengutronix.de> + - Chunfeng Yun <chunfeng....@mediatek.com> + +description: The MIPI DSI PHY supports up to 4-lane output. + +properties: + $nodename: + pattern: "^dsi-phy@[0-9a-f]+$" + + compatible: + enum: + - mediatek,mt2701-mipi-tx + - mediatek,mt7623-mipi-tx + - mediatek,mt8173-mipi-tx + - mediatek,mt8183-mipi-tx + + reg: + maxItems: 1 + + clocks: + items: + - description: PLL reference clock + + clock-output-names: + maxItems: 1 + + "#phy-cells": + const: 0 + + "#clock-cells": + const: 0 + + nvmem-cells: + maxItems: 1 + description: A phandle to the calibration data provided by a nvmem device, + if unspecified, default values shall be used. + + nvmem-cell-names: + items: + - const: calibration-data + + drive-strength-microamp: + description: adjust driving current + multipleOf: 200 + minimum: 2000 + maximum: 6000 + default: 4600 + +required: + - compatible + - reg + - clocks + - clock-output-names + - "#phy-cells" + - "#clock-cells" + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/mt8173-clk.h> + dsi-phy@10215000 { + compatible = "mediatek,mt8173-mipi-tx"; + reg = <0x10215000 0x1000>; + clocks = <&clk26m>; + clock-output-names = "mipi_tx0_pll"; + drive-strength-microamp = <4000>; + nvmem-cells= <&mipi_tx_calibration>; + nvmem-cell-names = "calibration-data"; + #clock-cells = <0>; + #phy-cells = <0>; + }; + +... -- 2.18.0
