Hi,

On Wed, 23 Dec 2020 18:42:17 +0100
Borislav Petkov <b...@alien8.de> wrote:

> From: Borislav Petkov <b...@suse.de>
> 
> Users of the instruction decoder should use this to decode instruction
> bytes. For that, have insn*() helpers return an int value to denote
> success/failure. When there's an error fetching the next insn byte and
> the insn falls short, return -ENODATA to denote that.

-ENODATA sounds good to me :)

Acked-by: Masami Hiramatsu <mhira...@kernel.org>

BTW, insn_decode() can return -EINVAL if !insn_complete(), is that OK?

> 
> While at it, make insn_get_opcode() more stricter as to whether what has
> seen so far is a valid insn and if not.
> 
> Copy linux/kconfig.h for the tools-version of the decoder so that it can
> use IS_ENABLED().

I think tools clone code must not use INSN_MODE_KERN because the tools may
not use kernel Kconfig.

Hmm, this may be better to make a different patch to introduce a NOSYNC tag
for sync checker in the tools. Something like;

> +int insn_decode(struct insn *insn, const void *kaddr, int buf_len, enum 
> insn_mode m)
> +{
> +     int ret;
> +
> +     if (m == INSN_MODE_KERN)
                return -EINVAL; /* NOSYNC */
> +     else
> +             insn_init(insn, kaddr, buf_len, m == INSN_MODE_64);
> +

Then we can simple file list for sync-check.sh.

Thank you,

> 
> Signed-off-by: Borislav Petkov <b...@suse.de>
> ---
>  arch/x86/include/asm/insn.h       |  24 ++-
>  arch/x86/lib/insn.c               | 239 +++++++++++++++++++++++-------
>  tools/arch/x86/include/asm/insn.h |  24 ++-
>  tools/arch/x86/lib/insn.c         | 239 +++++++++++++++++++++++-------
>  tools/include/linux/kconfig.h     |  73 +++++++++
>  5 files changed, 475 insertions(+), 124 deletions(-)
>  create mode 100644 tools/include/linux/kconfig.h
> 
> diff --git a/arch/x86/include/asm/insn.h b/arch/x86/include/asm/insn.h
> index a8c3d284fa46..088aa90e9158 100644
> --- a/arch/x86/include/asm/insn.h
> +++ b/arch/x86/include/asm/insn.h
> @@ -87,13 +87,23 @@ struct insn {
>  #define X86_VEX_M_MAX        0x1f                    /* VEX3.M Maximum value 
> */
>  
>  extern void insn_init(struct insn *insn, const void *kaddr, int buf_len, int 
> x86_64);
> -extern void insn_get_prefixes(struct insn *insn);
> -extern void insn_get_opcode(struct insn *insn);
> -extern void insn_get_modrm(struct insn *insn);
> -extern void insn_get_sib(struct insn *insn);
> -extern void insn_get_displacement(struct insn *insn);
> -extern void insn_get_immediate(struct insn *insn);
> -extern void insn_get_length(struct insn *insn);
> +extern int insn_get_prefixes(struct insn *insn);
> +extern int insn_get_opcode(struct insn *insn);
> +extern int insn_get_modrm(struct insn *insn);
> +extern int insn_get_sib(struct insn *insn);
> +extern int insn_get_displacement(struct insn *insn);
> +extern int insn_get_immediate(struct insn *insn);
> +extern int insn_get_length(struct insn *insn);
> +
> +enum insn_mode {
> +     INSN_MODE_32,
> +     INSN_MODE_64,
> +     /* Mode is determined by the current kernel build. */
> +     INSN_MODE_KERN,
> +     INSN_NUM_MODES,
> +};
> +
> +extern int insn_decode(struct insn *insn, const void *kaddr, int buf_len, 
> enum insn_mode m);
>  
>  /* Attribute will be determined after getting ModRM (for opcode groups) */
>  static inline void insn_get_attribute(struct insn *insn)
> diff --git a/arch/x86/lib/insn.c b/arch/x86/lib/insn.c
> index 1ba994862b56..b373aadcdd02 100644
> --- a/arch/x86/lib/insn.c
> +++ b/arch/x86/lib/insn.c
> @@ -13,6 +13,9 @@
>  #include <asm/inat.h>
>  #include <asm/insn.h>
>  
> +#include <linux/errno.h>
> +#include <linux/kconfig.h>
> +
>  #include <asm/emulate_prefix.h>
>  
>  /* Verify next sizeof(t) bytes can be on the same instruction */
> @@ -80,12 +83,15 @@ static int __insn_get_emulate_prefix(struct insn *insn,
>       return 1;
>  
>  err_out:
> -     return 0;
> +     return -ENODATA;
>  }
>  
>  static void insn_get_emulate_prefix(struct insn *insn)
>  {
> -     if (__insn_get_emulate_prefix(insn, xen_prefix, sizeof(xen_prefix)))
> +     int ret;
> +
> +     ret = __insn_get_emulate_prefix(insn, xen_prefix, sizeof(xen_prefix));
> +     if (ret > 0)
>               return;
>  
>       __insn_get_emulate_prefix(insn, kvm_prefix, sizeof(kvm_prefix));
> @@ -98,8 +104,12 @@ static void insn_get_emulate_prefix(struct insn *insn)
>   * Populates the @insn->prefixes bitmap, and updates @insn->next_byte
>   * to point to the (first) opcode.  No effect if @insn->prefixes.got
>   * is already set.
> + *
> + * * Returns:
> + * 0:  on success
> + * < 0: on error
>   */
> -void insn_get_prefixes(struct insn *insn)
> +int insn_get_prefixes(struct insn *insn)
>  {
>       struct insn_field *prefixes = &insn->prefixes;
>       insn_attr_t attr;
> @@ -107,7 +117,7 @@ void insn_get_prefixes(struct insn *insn)
>       int i, nb;
>  
>       if (prefixes->got)
> -             return;
> +             return 0;
>  
>       insn_get_emulate_prefix(insn);
>  
> @@ -218,8 +228,10 @@ void insn_get_prefixes(struct insn *insn)
>  
>       prefixes->got = 1;
>  
> +     return 0;
> +
>  err_out:
> -     return;
> +     return -ENODATA;
>  }
>  
>  /**
> @@ -231,16 +243,25 @@ void insn_get_prefixes(struct insn *insn)
>   * If necessary, first collects any preceding (prefix) bytes.
>   * Sets @insn->opcode.value = opcode1.  No effect if @insn->opcode.got
>   * is already 1.
> + *
> + * Returns:
> + * 0:  on success
> + * < 0: on error
>   */
> -void insn_get_opcode(struct insn *insn)
> +int insn_get_opcode(struct insn *insn)
>  {
>       struct insn_field *opcode = &insn->opcode;
> +     int pfx_id, ret;
>       insn_byte_t op;
> -     int pfx_id;
> +
>       if (opcode->got)
> -             return;
> -     if (!insn->prefixes.got)
> -             insn_get_prefixes(insn);
> +             return 0;
> +
> +     if (!insn->prefixes.got) {
> +             ret = insn_get_prefixes(insn);
> +             if (ret)
> +                     return ret;
> +     }
>  
>       /* Get first opcode */
>       op = get_next(insn_byte_t, insn);
> @@ -255,9 +276,13 @@ void insn_get_opcode(struct insn *insn)
>               insn->attr = inat_get_avx_attribute(op, m, p);
>               if ((inat_must_evex(insn->attr) && !insn_is_evex(insn)) ||
>                   (!inat_accept_vex(insn->attr) &&
> -                  !inat_is_group(insn->attr)))
> -                     insn->attr = 0; /* This instruction is bad */
> -             goto end;       /* VEX has only 1 byte for opcode */
> +                  !inat_is_group(insn->attr))) {
> +                     /* This instruction is bad */
> +                     insn->attr = 0;
> +                     return 1;
> +             }
> +             /* VEX has only 1 byte for opcode */
> +             goto end;
>       }
>  
>       insn->attr = inat_get_opcode_attribute(op);
> @@ -268,13 +293,18 @@ void insn_get_opcode(struct insn *insn)
>               pfx_id = insn_last_prefix_id(insn);
>               insn->attr = inat_get_escape_attribute(op, pfx_id, insn->attr);
>       }
> -     if (inat_must_vex(insn->attr))
> -             insn->attr = 0; /* This instruction is bad */
> +
> +     if (inat_must_vex(insn->attr)) {
> +             /* This instruction is bad */
> +             insn->attr = 0;
> +             return 1;
> +     }
>  end:
>       opcode->got = 1;
> +     return 0;
>  
>  err_out:
> -     return;
> +     return -ENODATA;
>  }
>  
>  /**
> @@ -284,15 +314,25 @@ void insn_get_opcode(struct insn *insn)
>   * Populates @insn->modrm and updates @insn->next_byte to point past the
>   * ModRM byte, if any.  If necessary, first collects the preceding bytes
>   * (prefixes and opcode(s)).  No effect if @insn->modrm.got is already 1.
> + *
> + * Returns:
> + * 0:  on success
> + * < 0: on error
>   */
> -void insn_get_modrm(struct insn *insn)
> +int insn_get_modrm(struct insn *insn)
>  {
>       struct insn_field *modrm = &insn->modrm;
>       insn_byte_t pfx_id, mod;
> +     int ret;
> +
>       if (modrm->got)
> -             return;
> -     if (!insn->opcode.got)
> -             insn_get_opcode(insn);
> +             return 0;
> +
> +     if (!insn->opcode.got) {
> +             ret = insn_get_opcode(insn);
> +             if (ret)
> +                     return ret;
> +     }
>  
>       if (inat_has_modrm(insn->attr)) {
>               mod = get_next(insn_byte_t, insn);
> @@ -302,17 +342,22 @@ void insn_get_modrm(struct insn *insn)
>                       pfx_id = insn_last_prefix_id(insn);
>                       insn->attr = inat_get_group_attribute(mod, pfx_id,
>                                                             insn->attr);
> -                     if (insn_is_avx(insn) && !inat_accept_vex(insn->attr))
> -                             insn->attr = 0; /* This is bad */
> +                     if (insn_is_avx(insn) && !inat_accept_vex(insn->attr)) {
> +                             /* Bad insn */
> +                             insn->attr = 0;
> +                             return 1;
> +                     }
>               }
>       }
>  
>       if (insn->x86_64 && inat_is_force64(insn->attr))
>               insn->opnd_bytes = 8;
> +
>       modrm->got = 1;
> +     return 0;
>  
>  err_out:
> -     return;
> +     return -ENODATA;
>  }
>  
>  
> @@ -326,11 +371,16 @@ void insn_get_modrm(struct insn *insn)
>  int insn_rip_relative(struct insn *insn)
>  {
>       struct insn_field *modrm = &insn->modrm;
> +     int ret;
>  
>       if (!insn->x86_64)
>               return 0;
> -     if (!modrm->got)
> -             insn_get_modrm(insn);
> +
> +     if (!modrm->got) {
> +             ret = insn_get_modrm(insn);
> +             if (ret)
> +                     return ret;
> +     }
>       /*
>        * For rip-relative instructions, the mod field (top 2 bits)
>        * is zero and the r/m field (bottom 3 bits) is 0x5.
> @@ -344,15 +394,25 @@ int insn_rip_relative(struct insn *insn)
>   *
>   * If necessary, first collects the instruction up to and including the
>   * ModRM byte.
> + *
> + * Returns:
> + * 0: if decoding succeeded
> + * < 0: otherwise.
>   */
> -void insn_get_sib(struct insn *insn)
> +int insn_get_sib(struct insn *insn)
>  {
>       insn_byte_t modrm;
> +     int ret;
>  
>       if (insn->sib.got)
> -             return;
> -     if (!insn->modrm.got)
> -             insn_get_modrm(insn);
> +             return 0;
> +
> +     if (!insn->modrm.got) {
> +             ret = insn_get_modrm(insn);
> +             if (ret)
> +                     return ret;
> +     }
> +
>       if (insn->modrm.nbytes) {
>               modrm = (insn_byte_t)insn->modrm.value;
>               if (insn->addr_bytes != 2 &&
> @@ -363,8 +423,10 @@ void insn_get_sib(struct insn *insn)
>       }
>       insn->sib.got = 1;
>  
> +     return 0;
> +
>  err_out:
> -     return;
> +     return -ENODATA;
>  }
>  
>  
> @@ -375,15 +437,25 @@ void insn_get_sib(struct insn *insn)
>   * If necessary, first collects the instruction up to and including the
>   * SIB byte.
>   * Displacement value is sign-expanded.
> + *
> + * * Returns:
> + * 0: if decoding succeeded
> + * < 0: otherwise.
>   */
> -void insn_get_displacement(struct insn *insn)
> +int insn_get_displacement(struct insn *insn)
>  {
>       insn_byte_t mod, rm, base;
> +     int ret;
>  
>       if (insn->displacement.got)
> -             return;
> -     if (!insn->sib.got)
> -             insn_get_sib(insn);
> +             return 0;
> +
> +     if (!insn->sib.got) {
> +             ret = insn_get_sib(insn);
> +             if (ret)
> +                     return ret;
> +     }
> +
>       if (insn->modrm.nbytes) {
>               /*
>                * Interpreting the modrm byte:
> @@ -426,12 +498,13 @@ void insn_get_displacement(struct insn *insn)
>       }
>  out:
>       insn->displacement.got = 1;
> +     return 0;
>  
>  err_out:
> -     return;
> +     return -ENODATA;
>  }
>  
> -/* Decode moffset16/32/64. Return 0 if failed */
> +/* Decode moffset16/32/64. Return a negative value if failed. */
>  static int __get_moffset(struct insn *insn)
>  {
>       switch (insn->addr_bytes) {
> @@ -457,10 +530,10 @@ static int __get_moffset(struct insn *insn)
>       return 1;
>  
>  err_out:
> -     return 0;
> +     return -ENODATA;
>  }
>  
> -/* Decode imm v32(Iz). Return 0 if failed */
> +/* Decode imm v32(Iz). Return a negative value if failed. */
>  static int __get_immv32(struct insn *insn)
>  {
>       switch (insn->opnd_bytes) {
> @@ -480,10 +553,10 @@ static int __get_immv32(struct insn *insn)
>       return 1;
>  
>  err_out:
> -     return 0;
> +     return -ENODATA;
>  }
>  
> -/* Decode imm v64(Iv/Ov), Return 0 if failed */
> +/* Decode imm v64(Iv/Ov). Return a negative value if failed. */
>  static int __get_immv(struct insn *insn)
>  {
>       switch (insn->opnd_bytes) {
> @@ -507,11 +580,12 @@ static int __get_immv(struct insn *insn)
>       insn->immediate1.got = insn->immediate2.got = 1;
>  
>       return 1;
> +
>  err_out:
> -     return 0;
> +     return -ENODATA;
>  }
>  
> -/* Decode ptr16:16/32(Ap) */
> +/* Decode ptr16:16/32(Ap). Return a negative value if failed. */
>  static int __get_immptr(struct insn *insn)
>  {
>       switch (insn->opnd_bytes) {
> @@ -534,25 +608,36 @@ static int __get_immptr(struct insn *insn)
>       insn->immediate1.got = insn->immediate2.got = 1;
>  
>       return 1;
> +
>  err_out:
> -     return 0;
> +     return -ENODATA;
>  }
>  
>  /**
> - * insn_get_immediate() - Get the immediates of instruction
> + * insn_get_immediate() - Get the immediate in an instruction
>   * @insn:    &struct insn containing instruction
>   *
>   * If necessary, first collects the instruction up to and including the
>   * displacement bytes.
>   * Basically, most of immediates are sign-expanded. Unsigned-value can be
> - * get by bit masking with ((1 << (nbytes * 8)) - 1)
> + * computed by bit masking with ((1 << (nbytes * 8)) - 1)
> + *
> + * Returns:
> + * 0:  on success
> + * < 0: on error
>   */
> -void insn_get_immediate(struct insn *insn)
> +int insn_get_immediate(struct insn *insn)
>  {
> +     int ret;
> +
>       if (insn->immediate.got)
> -             return;
> -     if (!insn->displacement.got)
> -             insn_get_displacement(insn);
> +             return 0;
> +
> +     if (!insn->displacement.got) {
> +             ret = insn_get_displacement(insn);
> +             if (ret)
> +                     return ret;
> +     }
>  
>       if (inat_has_moffset(insn->attr)) {
>               if (!__get_moffset(insn))
> @@ -605,9 +690,10 @@ void insn_get_immediate(struct insn *insn)
>       }
>  done:
>       insn->immediate.got = 1;
> +     return 0;
>  
>  err_out:
> -     return;
> +     return -ENODATA;
>  }
>  
>  /**
> @@ -616,13 +702,56 @@ void insn_get_immediate(struct insn *insn)
>   *
>   * If necessary, first collects the instruction up to and including the
>   * immediates bytes.
> - */
> -void insn_get_length(struct insn *insn)
> + *
> + * Returns:
> + *  - 0 on success
> + *  - < 0 on error
> +*/
> +int insn_get_length(struct insn *insn)
>  {
> +     int ret;
> +
>       if (insn->length)
> -             return;
> -     if (!insn->immediate.got)
> -             insn_get_immediate(insn);
> +             return 0;
> +
> +     if (!insn->immediate.got) {
> +             ret = insn_get_immediate(insn);
> +             if (ret)
> +                     return ret;
> +     }
> +
>       insn->length = (unsigned char)((unsigned long)insn->next_byte
>                                    - (unsigned long)insn->kaddr);
> +
> +     return 0;
> +}
> +
> +/**
> + * insn_decode() - Decode an x86 instruction
> + * @insn:    &struct insn to be initialized
> + * @kaddr:   address (in kernel memory) of instruction (or copy thereof)
> + * @buf_len: length of the insn buffer at @kaddr
> + * @m:               insn mode, see enum insn_mode
> + *
> + * Returns:
> + * 0: if decoding succeeded
> + * < 0: otherwise.
> + */
> +int insn_decode(struct insn *insn, const void *kaddr, int buf_len, enum 
> insn_mode m)
> +{
> +     int ret;
> +
> +     if (m == INSN_MODE_KERN)
> +             insn_init(insn, kaddr, buf_len, IS_ENABLED(CONFIG_X86_64));
> +     else
> +             insn_init(insn, kaddr, buf_len, m == INSN_MODE_64);
> +
> +     ret = insn_get_length(insn);
> +     if (ret)
> +             return ret;
> +
> +     if (insn_complete(insn))
> +             return 0;
> +
> +     return -EINVAL;
>  }
> diff --git a/tools/arch/x86/include/asm/insn.h 
> b/tools/arch/x86/include/asm/insn.h
> index 52c6262e6bfd..ed43bf01ebcc 100644
> --- a/tools/arch/x86/include/asm/insn.h
> +++ b/tools/arch/x86/include/asm/insn.h
> @@ -87,13 +87,23 @@ struct insn {
>  #define X86_VEX_M_MAX        0x1f                    /* VEX3.M Maximum value 
> */
>  
>  extern void insn_init(struct insn *insn, const void *kaddr, int buf_len, int 
> x86_64);
> -extern void insn_get_prefixes(struct insn *insn);
> -extern void insn_get_opcode(struct insn *insn);
> -extern void insn_get_modrm(struct insn *insn);
> -extern void insn_get_sib(struct insn *insn);
> -extern void insn_get_displacement(struct insn *insn);
> -extern void insn_get_immediate(struct insn *insn);
> -extern void insn_get_length(struct insn *insn);
> +extern int insn_get_prefixes(struct insn *insn);
> +extern int insn_get_opcode(struct insn *insn);
> +extern int insn_get_modrm(struct insn *insn);
> +extern int insn_get_sib(struct insn *insn);
> +extern int insn_get_displacement(struct insn *insn);
> +extern int insn_get_immediate(struct insn *insn);
> +extern int insn_get_length(struct insn *insn);
> +
> +enum insn_mode {
> +     INSN_MODE_32,
> +     INSN_MODE_64,
> +     /* Mode is determined by the current kernel build. */
> +     INSN_MODE_KERN,
> +     INSN_NUM_MODES,
> +};
> +
> +extern int insn_decode(struct insn *insn, const void *kaddr, int buf_len, 
> enum insn_mode m);
>  
>  /* Attribute will be determined after getting ModRM (for opcode groups) */
>  static inline void insn_get_attribute(struct insn *insn)
> diff --git a/tools/arch/x86/lib/insn.c b/tools/arch/x86/lib/insn.c
> index f3277d6e4ef2..a2f9d9e177f2 100644
> --- a/tools/arch/x86/lib/insn.c
> +++ b/tools/arch/x86/lib/insn.c
> @@ -13,6 +13,9 @@
>  #include "../include/asm/inat.h"
>  #include "../include/asm/insn.h"
>  
> +#include <linux/errno.h>
> +#include <linux/kconfig.h>
> +
>  #include "../include/asm/emulate_prefix.h"
>  
>  /* Verify next sizeof(t) bytes can be on the same instruction */
> @@ -80,12 +83,15 @@ static int __insn_get_emulate_prefix(struct insn *insn,
>       return 1;
>  
>  err_out:
> -     return 0;
> +     return -ENODATA;
>  }
>  
>  static void insn_get_emulate_prefix(struct insn *insn)
>  {
> -     if (__insn_get_emulate_prefix(insn, xen_prefix, sizeof(xen_prefix)))
> +     int ret;
> +
> +     ret = __insn_get_emulate_prefix(insn, xen_prefix, sizeof(xen_prefix));
> +     if (ret > 0)
>               return;
>  
>       __insn_get_emulate_prefix(insn, kvm_prefix, sizeof(kvm_prefix));
> @@ -98,8 +104,12 @@ static void insn_get_emulate_prefix(struct insn *insn)
>   * Populates the @insn->prefixes bitmap, and updates @insn->next_byte
>   * to point to the (first) opcode.  No effect if @insn->prefixes.got
>   * is already set.
> + *
> + * * Returns:
> + * 0:  on success
> + * < 0: on error
>   */
> -void insn_get_prefixes(struct insn *insn)
> +int insn_get_prefixes(struct insn *insn)
>  {
>       struct insn_field *prefixes = &insn->prefixes;
>       insn_attr_t attr;
> @@ -107,7 +117,7 @@ void insn_get_prefixes(struct insn *insn)
>       int i, nb;
>  
>       if (prefixes->got)
> -             return;
> +             return 0;
>  
>       insn_get_emulate_prefix(insn);
>  
> @@ -218,8 +228,10 @@ void insn_get_prefixes(struct insn *insn)
>  
>       prefixes->got = 1;
>  
> +     return 0;
> +
>  err_out:
> -     return;
> +     return -ENODATA;
>  }
>  
>  /**
> @@ -231,16 +243,25 @@ void insn_get_prefixes(struct insn *insn)
>   * If necessary, first collects any preceding (prefix) bytes.
>   * Sets @insn->opcode.value = opcode1.  No effect if @insn->opcode.got
>   * is already 1.
> + *
> + * Returns:
> + * 0:  on success
> + * < 0: on error
>   */
> -void insn_get_opcode(struct insn *insn)
> +int insn_get_opcode(struct insn *insn)
>  {
>       struct insn_field *opcode = &insn->opcode;
> +     int pfx_id, ret;
>       insn_byte_t op;
> -     int pfx_id;
> +
>       if (opcode->got)
> -             return;
> -     if (!insn->prefixes.got)
> -             insn_get_prefixes(insn);
> +             return 0;
> +
> +     if (!insn->prefixes.got) {
> +             ret = insn_get_prefixes(insn);
> +             if (ret)
> +                     return ret;
> +     }
>  
>       /* Get first opcode */
>       op = get_next(insn_byte_t, insn);
> @@ -255,9 +276,13 @@ void insn_get_opcode(struct insn *insn)
>               insn->attr = inat_get_avx_attribute(op, m, p);
>               if ((inat_must_evex(insn->attr) && !insn_is_evex(insn)) ||
>                   (!inat_accept_vex(insn->attr) &&
> -                  !inat_is_group(insn->attr)))
> -                     insn->attr = 0; /* This instruction is bad */
> -             goto end;       /* VEX has only 1 byte for opcode */
> +                  !inat_is_group(insn->attr))) {
> +                     /* This instruction is bad */
> +                     insn->attr = 0;
> +                     return 1;
> +             }
> +             /* VEX has only 1 byte for opcode */
> +             goto end;
>       }
>  
>       insn->attr = inat_get_opcode_attribute(op);
> @@ -268,13 +293,18 @@ void insn_get_opcode(struct insn *insn)
>               pfx_id = insn_last_prefix_id(insn);
>               insn->attr = inat_get_escape_attribute(op, pfx_id, insn->attr);
>       }
> -     if (inat_must_vex(insn->attr))
> -             insn->attr = 0; /* This instruction is bad */
> +
> +     if (inat_must_vex(insn->attr)) {
> +             /* This instruction is bad */
> +             insn->attr = 0;
> +             return 1;
> +     }
>  end:
>       opcode->got = 1;
> +     return 0;
>  
>  err_out:
> -     return;
> +     return -ENODATA;
>  }
>  
>  /**
> @@ -284,15 +314,25 @@ void insn_get_opcode(struct insn *insn)
>   * Populates @insn->modrm and updates @insn->next_byte to point past the
>   * ModRM byte, if any.  If necessary, first collects the preceding bytes
>   * (prefixes and opcode(s)).  No effect if @insn->modrm.got is already 1.
> + *
> + * Returns:
> + * 0:  on success
> + * < 0: on error
>   */
> -void insn_get_modrm(struct insn *insn)
> +int insn_get_modrm(struct insn *insn)
>  {
>       struct insn_field *modrm = &insn->modrm;
>       insn_byte_t pfx_id, mod;
> +     int ret;
> +
>       if (modrm->got)
> -             return;
> -     if (!insn->opcode.got)
> -             insn_get_opcode(insn);
> +             return 0;
> +
> +     if (!insn->opcode.got) {
> +             ret = insn_get_opcode(insn);
> +             if (ret)
> +                     return ret;
> +     }
>  
>       if (inat_has_modrm(insn->attr)) {
>               mod = get_next(insn_byte_t, insn);
> @@ -302,17 +342,22 @@ void insn_get_modrm(struct insn *insn)
>                       pfx_id = insn_last_prefix_id(insn);
>                       insn->attr = inat_get_group_attribute(mod, pfx_id,
>                                                             insn->attr);
> -                     if (insn_is_avx(insn) && !inat_accept_vex(insn->attr))
> -                             insn->attr = 0; /* This is bad */
> +                     if (insn_is_avx(insn) && !inat_accept_vex(insn->attr)) {
> +                             /* Bad insn */
> +                             insn->attr = 0;
> +                             return 1;
> +                     }
>               }
>       }
>  
>       if (insn->x86_64 && inat_is_force64(insn->attr))
>               insn->opnd_bytes = 8;
> +
>       modrm->got = 1;
> +     return 0;
>  
>  err_out:
> -     return;
> +     return -ENODATA;
>  }
>  
>  
> @@ -326,11 +371,16 @@ void insn_get_modrm(struct insn *insn)
>  int insn_rip_relative(struct insn *insn)
>  {
>       struct insn_field *modrm = &insn->modrm;
> +     int ret;
>  
>       if (!insn->x86_64)
>               return 0;
> -     if (!modrm->got)
> -             insn_get_modrm(insn);
> +
> +     if (!modrm->got) {
> +             ret = insn_get_modrm(insn);
> +             if (ret)
> +                     return ret;
> +     }
>       /*
>        * For rip-relative instructions, the mod field (top 2 bits)
>        * is zero and the r/m field (bottom 3 bits) is 0x5.
> @@ -344,15 +394,25 @@ int insn_rip_relative(struct insn *insn)
>   *
>   * If necessary, first collects the instruction up to and including the
>   * ModRM byte.
> + *
> + * Returns:
> + * 0: if decoding succeeded
> + * < 0: otherwise.
>   */
> -void insn_get_sib(struct insn *insn)
> +int insn_get_sib(struct insn *insn)
>  {
>       insn_byte_t modrm;
> +     int ret;
>  
>       if (insn->sib.got)
> -             return;
> -     if (!insn->modrm.got)
> -             insn_get_modrm(insn);
> +             return 0;
> +
> +     if (!insn->modrm.got) {
> +             ret = insn_get_modrm(insn);
> +             if (ret)
> +                     return ret;
> +     }
> +
>       if (insn->modrm.nbytes) {
>               modrm = (insn_byte_t)insn->modrm.value;
>               if (insn->addr_bytes != 2 &&
> @@ -363,8 +423,10 @@ void insn_get_sib(struct insn *insn)
>       }
>       insn->sib.got = 1;
>  
> +     return 0;
> +
>  err_out:
> -     return;
> +     return -ENODATA;
>  }
>  
>  
> @@ -375,15 +437,25 @@ void insn_get_sib(struct insn *insn)
>   * If necessary, first collects the instruction up to and including the
>   * SIB byte.
>   * Displacement value is sign-expanded.
> + *
> + * * Returns:
> + * 0: if decoding succeeded
> + * < 0: otherwise.
>   */
> -void insn_get_displacement(struct insn *insn)
> +int insn_get_displacement(struct insn *insn)
>  {
>       insn_byte_t mod, rm, base;
> +     int ret;
>  
>       if (insn->displacement.got)
> -             return;
> -     if (!insn->sib.got)
> -             insn_get_sib(insn);
> +             return 0;
> +
> +     if (!insn->sib.got) {
> +             ret = insn_get_sib(insn);
> +             if (ret)
> +                     return ret;
> +     }
> +
>       if (insn->modrm.nbytes) {
>               /*
>                * Interpreting the modrm byte:
> @@ -426,12 +498,13 @@ void insn_get_displacement(struct insn *insn)
>       }
>  out:
>       insn->displacement.got = 1;
> +     return 0;
>  
>  err_out:
> -     return;
> +     return -ENODATA;
>  }
>  
> -/* Decode moffset16/32/64. Return 0 if failed */
> +/* Decode moffset16/32/64. Return a negative value if failed. */
>  static int __get_moffset(struct insn *insn)
>  {
>       switch (insn->addr_bytes) {
> @@ -457,10 +530,10 @@ static int __get_moffset(struct insn *insn)
>       return 1;
>  
>  err_out:
> -     return 0;
> +     return -ENODATA;
>  }
>  
> -/* Decode imm v32(Iz). Return 0 if failed */
> +/* Decode imm v32(Iz). Return a negative value if failed. */
>  static int __get_immv32(struct insn *insn)
>  {
>       switch (insn->opnd_bytes) {
> @@ -480,10 +553,10 @@ static int __get_immv32(struct insn *insn)
>       return 1;
>  
>  err_out:
> -     return 0;
> +     return -ENODATA;
>  }
>  
> -/* Decode imm v64(Iv/Ov), Return 0 if failed */
> +/* Decode imm v64(Iv/Ov). Return a negative value if failed. */
>  static int __get_immv(struct insn *insn)
>  {
>       switch (insn->opnd_bytes) {
> @@ -507,11 +580,12 @@ static int __get_immv(struct insn *insn)
>       insn->immediate1.got = insn->immediate2.got = 1;
>  
>       return 1;
> +
>  err_out:
> -     return 0;
> +     return -ENODATA;
>  }
>  
> -/* Decode ptr16:16/32(Ap) */
> +/* Decode ptr16:16/32(Ap). Return a negative value if failed. */
>  static int __get_immptr(struct insn *insn)
>  {
>       switch (insn->opnd_bytes) {
> @@ -534,25 +608,36 @@ static int __get_immptr(struct insn *insn)
>       insn->immediate1.got = insn->immediate2.got = 1;
>  
>       return 1;
> +
>  err_out:
> -     return 0;
> +     return -ENODATA;
>  }
>  
>  /**
> - * insn_get_immediate() - Get the immediates of instruction
> + * insn_get_immediate() - Get the immediate in an instruction
>   * @insn:    &struct insn containing instruction
>   *
>   * If necessary, first collects the instruction up to and including the
>   * displacement bytes.
>   * Basically, most of immediates are sign-expanded. Unsigned-value can be
> - * get by bit masking with ((1 << (nbytes * 8)) - 1)
> + * computed by bit masking with ((1 << (nbytes * 8)) - 1)
> + *
> + * Returns:
> + * 0:  on success
> + * < 0: on error
>   */
> -void insn_get_immediate(struct insn *insn)
> +int insn_get_immediate(struct insn *insn)
>  {
> +     int ret;
> +
>       if (insn->immediate.got)
> -             return;
> -     if (!insn->displacement.got)
> -             insn_get_displacement(insn);
> +             return 0;
> +
> +     if (!insn->displacement.got) {
> +             ret = insn_get_displacement(insn);
> +             if (ret)
> +                     return ret;
> +     }
>  
>       if (inat_has_moffset(insn->attr)) {
>               if (!__get_moffset(insn))
> @@ -605,9 +690,10 @@ void insn_get_immediate(struct insn *insn)
>       }
>  done:
>       insn->immediate.got = 1;
> +     return 0;
>  
>  err_out:
> -     return;
> +     return -ENODATA;
>  }
>  
>  /**
> @@ -616,13 +702,56 @@ void insn_get_immediate(struct insn *insn)
>   *
>   * If necessary, first collects the instruction up to and including the
>   * immediates bytes.
> - */
> -void insn_get_length(struct insn *insn)
> + *
> + * Returns:
> + *  - 0 on success
> + *  - < 0 on error
> +*/
> +int insn_get_length(struct insn *insn)
>  {
> +     int ret;
> +
>       if (insn->length)
> -             return;
> -     if (!insn->immediate.got)
> -             insn_get_immediate(insn);
> +             return 0;
> +
> +     if (!insn->immediate.got) {
> +             ret = insn_get_immediate(insn);
> +             if (ret)
> +                     return ret;
> +     }
> +
>       insn->length = (unsigned char)((unsigned long)insn->next_byte
>                                    - (unsigned long)insn->kaddr);
> +
> +     return 0;
> +}
> +
> +/**
> + * insn_decode() - Decode an x86 instruction
> + * @insn:    &struct insn to be initialized
> + * @kaddr:   address (in kernel memory) of instruction (or copy thereof)
> + * @buf_len: length of the insn buffer at @kaddr
> + * @m:               insn mode, see enum insn_mode
> + *
> + * Returns:
> + * 0: if decoding succeeded
> + * < 0: otherwise.
> + */
> +int insn_decode(struct insn *insn, const void *kaddr, int buf_len, enum 
> insn_mode m)
> +{
> +     int ret;
> +
> +     if (m == INSN_MODE_KERN)
> +             insn_init(insn, kaddr, buf_len, IS_ENABLED(CONFIG_X86_64));
> +     else
> +             insn_init(insn, kaddr, buf_len, m == INSN_MODE_64);
> +
> +     ret = insn_get_length(insn);
> +     if (ret)
> +             return ret;
> +
> +     if (insn_complete(insn))
> +             return 0;
> +
> +     return -EINVAL;
>  }
> diff --git a/tools/include/linux/kconfig.h b/tools/include/linux/kconfig.h
> new file mode 100644
> index 000000000000..1555a0c4f345
> --- /dev/null
> +++ b/tools/include/linux/kconfig.h
> @@ -0,0 +1,73 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +#ifndef _TOOLS_LINUX_KCONFIG_H
> +#define _TOOLS_LINUX_KCONFIG_H
> +
> +/* CONFIG_CC_VERSION_TEXT (Do not delete this comment. See help in Kconfig) 
> */
> +
> +#ifdef CONFIG_CPU_BIG_ENDIAN
> +#define __BIG_ENDIAN 4321
> +#else
> +#define __LITTLE_ENDIAN 1234
> +#endif
> +
> +#define __ARG_PLACEHOLDER_1 0,
> +#define __take_second_arg(__ignored, val, ...) val
> +
> +/*
> + * The use of "&&" / "||" is limited in certain expressions.
> + * The following enable to calculate "and" / "or" with macro expansion only.
> + */
> +#define __and(x, y)                  ___and(x, y)
> +#define ___and(x, y)                 ____and(__ARG_PLACEHOLDER_##x, y)
> +#define ____and(arg1_or_junk, y)     __take_second_arg(arg1_or_junk y, 0)
> +
> +#define __or(x, y)                   ___or(x, y)
> +#define ___or(x, y)                  ____or(__ARG_PLACEHOLDER_##x, y)
> +#define ____or(arg1_or_junk, y)              __take_second_arg(arg1_or_junk 
> 1, y)
> +
> +/*
> + * Helper macros to use CONFIG_ options in C/CPP expressions. Note that
> + * these only work with boolean and tristate options.
> + */
> +
> +/*
> + * Getting something that works in C and CPP for an arg that may or may
> + * not be defined is tricky.  Here, if we have "#define CONFIG_BOOGER 1"
> + * we match on the placeholder define, insert the "0," for arg1 and generate
> + * the triplet (0, 1, 0).  Then the last step cherry picks the 2nd arg (a 
> one).
> + * When CONFIG_BOOGER is not defined, we generate a (... 1, 0) pair, and when
> + * the last step cherry picks the 2nd arg, we get a zero.
> + */
> +#define __is_defined(x)                      ___is_defined(x)
> +#define ___is_defined(val)           ____is_defined(__ARG_PLACEHOLDER_##val)
> +#define ____is_defined(arg1_or_junk) __take_second_arg(arg1_or_junk 1, 0)
> +
> +/*
> + * IS_BUILTIN(CONFIG_FOO) evaluates to 1 if CONFIG_FOO is set to 'y', 0
> + * otherwise. For boolean options, this is equivalent to
> + * IS_ENABLED(CONFIG_FOO).
> + */
> +#define IS_BUILTIN(option) __is_defined(option)
> +
> +/*
> + * IS_MODULE(CONFIG_FOO) evaluates to 1 if CONFIG_FOO is set to 'm', 0
> + * otherwise.
> + */
> +#define IS_MODULE(option) __is_defined(option##_MODULE)
> +
> +/*
> + * IS_REACHABLE(CONFIG_FOO) evaluates to 1 if the currently compiled
> + * code can call a function defined in code compiled based on CONFIG_FOO.
> + * This is similar to IS_ENABLED(), but returns false when invoked from
> + * built-in code when CONFIG_FOO is set to 'm'.
> + */
> +#define IS_REACHABLE(option) __or(IS_BUILTIN(option), \
> +                             __and(IS_MODULE(option), __is_defined(MODULE)))
> +
> +/*
> + * IS_ENABLED(CONFIG_FOO) evaluates to 1 if CONFIG_FOO is set to 'y' or 'm',
> + * 0 otherwise.
> + */
> +#define IS_ENABLED(option) __or(IS_BUILTIN(option), IS_MODULE(option))
> +
> +#endif /* _TOOLS_LINUX_KCONFIG_H */
> -- 
> 2.29.2
> 


-- 
Masami Hiramatsu <mhira...@kernel.org>

Reply via email to