Hi,
On Thursday, January 7, 2021 5:19 PM, Ran Wang wrote:
>
> When doing CPU un-plug stress test, function smpboot_park_threads() would get
> call to park kernel threads (which including ksoftirqd) on
> that CPU core, and function wait_task_inactive() would yield for those queued
> task(s) by calling schedule_hrtimerout() with mode of HRTIMER_MODE_REL.
>
> stack trace:
> ...
> smpboot_thread_fn
> cpuhp_thread_fun
> cpuhp_invoke_callback
> smpboot_park_threads
> smpboot_park_thread: ksoftirqd/1
> kthread_park
> wait_task_inactive
> schedule_hrtimerout
>
> However, when PREEMPT_RT is set, this would cause a pending issue since
> schedule_hrtimerout() depend on thread ksoftirqd to complete related work if
> it using HRTIMER_MODE_SOFT. So force using
> HRTIMER_MODE_HARD in such case.
This issue was observed on LX2160ARDB (arm64, 16 A72 cores) when selecting
PREEMPT_RT,
non-RT kernel works fine.And I could verify that fix on both linux-5.6.y-rt and
linux-5.4.y-rt.
But for linux-5.9.y-rt and linux-5.10.y-rt, looks there are other issues which
blocking
verification currently. Below is the steps for issue reproducing:
1. Kernel menuconfig:
CONFIG_QORIQ_CPUFREQ=y
CONFIG_HAVE_PREEMPT_LAZY=y
CONFIG_PREEMPT_LAZY=y
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_PREEMPT_RT=y
CONFIG_PREEMPT_COUNT=y
CONFIG_PREEMPTION=y
2. Shell commands (Issue would happen within roughly 400 rounds of below loop)
echo ondemand > /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor
echo ondemand > /sys/devices/system/cpu/cpu1/cpufreq/scaling_governor
echo ondemand > /sys/devices/system/cpu/cpu2/cpufreq/scaling_governor
echo ondemand > /sys/devices/system/cpu/cpu3/cpufreq/scaling_governor
echo ondemand > /sys/devices/system/cpu/cpu4/cpufreq/scaling_governor
echo ondemand > /sys/devices/system/cpu/cpu5/cpufreq/scaling_governor
echo ondemand > /sys/devices/system/cpu/cpu6/cpufreq/scaling_governor
echo ondemand > /sys/devices/system/cpu/cpu7/cpufreq/scaling_governor
echo ondemand > /sys/devices/system/cpu/cpu8/cpufreq/scaling_governor
echo ondemand > /sys/devices/system/cpu/cpu9/cpufreq/scaling_governor
echo ondemand > /sys/devices/system/cpu/cpu10/cpufreq/scaling_governor
echo ondemand > /sys/devices/system/cpu/cpu11/cpufreq/scaling_governor
echo ondemand > /sys/devices/system/cpu/cpu12/cpufreq/scaling_governor
echo ondemand > /sys/devices/system/cpu/cpu13/cpufreq/scaling_governor
echo ondemand > /sys/devices/system/cpu/cpu14/cpufreq/scaling_governor
echo ondemand > /sys/devices/system/cpu/cpu15/cpufreq/scaling_governor
count=1
while [ $? -eq 0 ]
do
echo "$count th test"
sleep 3
let "count=count+1"
echo 0 > /sys/devices/system/cpu/cpu0/online
echo 0 > /sys/devices/system/cpu/cpu1/online
echo 0 > /sys/devices/system/cpu/cpu2/online
echo 0 > /sys/devices/system/cpu/cpu3/online
echo 0 > /sys/devices/system/cpu/cpu4/online
echo 0 > /sys/devices/system/cpu/cpu5/online
echo 0 > /sys/devices/system/cpu/cpu6/online
echo 0 > /sys/devices/system/cpu/cpu7/online
echo 0 > /sys/devices/system/cpu/cpu8/online
echo 0 > /sys/devices/system/cpu/cpu9/online
echo 0 > /sys/devices/system/cpu/cpu10/online
echo 0 > /sys/devices/system/cpu/cpu11/online
echo 0 > /sys/devices/system/cpu/cpu12/online
echo 0 > /sys/devices/system/cpu/cpu13/online
echo 0 > /sys/devices/system/cpu/cpu14/online
echo 1 > /sys/devices/system/cpu/cpu0/online
echo 1 > /sys/devices/system/cpu/cpu1/online
echo 1 > /sys/devices/system/cpu/cpu2/online
echo 1 > /sys/devices/system/cpu/cpu3/online
echo 1 > /sys/devices/system/cpu/cpu4/online
echo 1 > /sys/devices/system/cpu/cpu5/online
echo 1 > /sys/devices/system/cpu/cpu6/online
echo 1 > /sys/devices/system/cpu/cpu7/online
echo 1 > /sys/devices/system/cpu/cpu8/online
echo 1 > /sys/devices/system/cpu/cpu9/online
echo 1 > /sys/devices/system/cpu/cpu10/online
echo 1 > /sys/devices/system/cpu/cpu11/online
echo 1 > /sys/devices/system/cpu/cpu12/online
echo 1 > /sys/devices/system/cpu/cpu13/online
echo 1 > /sys/devices/system/cpu/cpu14/online
done
To be honest, I am not sure how non-RT kernel could avoid this issue. Could
anybody give some input/suggestion on this?
Thank you.
Regards,
Ran
> Suggested-by: Jiafei Pan <jiafei....@nxp.com>
> Signed-off-by: Ran Wang <ran.wan...@nxp.com>
> ---
> kernel/sched/core.c | 9 +++++++--
> 1 file changed, 7 insertions(+), 2 deletions(-)
>
> diff --git a/kernel/sched/core.c b/kernel/sched/core.c index 792da55..4cc742a
> 100644
> --- a/kernel/sched/core.c
> +++ b/kernel/sched/core.c
> @@ -2054,10 +2054,15 @@ unsigned long wait_task_inactive(struct task_struct
> *p, long match_state)
> ktime_t to = NSEC_PER_SEC / HZ;
>
> set_current_state(TASK_UNINTERRUPTIBLE);
> - schedule_hrtimeout(&to, HRTIMER_MODE_REL);
> +
> + if (IS_ENABLED(CONFIG_PREEMPT_RT) &&
> + !strncmp(p->comm, "ksoftirqd/", 10))
> + schedule_hrtimeout(&to,
> + HRTIMER_MODE_REL | HRTIMER_MODE_HARD);
> + else
> + schedule_hrtimeout(&to, HRTIMER_MODE_REL);
> continue;
> }
> -
> /*
> * Ahh, all good. It wasn't running, and it wasn't
> * runnable, which means that it will never become
> --
> 2.7.4
