On 1/4/21 3:44 AM, Anshuman Khandual wrote:
On 1/3/21 10:35 PM, Rob Herring wrote:
On Wed, Dec 23, 2020 at 03:33:43PM +0530, Anshuman Khandual wrote:
This patch documents the device tree binding in use for Arm TRBE.
Cc: devicet...@vger.kernel.org
Cc: Mathieu Poirier <mathieu.poir...@linaro.org>
Cc: Mike Leach <mike.le...@linaro.org>
Cc: Suzuki K Poulose <suzuki.poul...@arm.com>
Signed-off-by: Anshuman Khandual <anshuman.khand...@arm.com>
---
Changes in V1:
- TRBE DT entry has been renamed as 'arm, trace-buffer-extension'
Documentation/devicetree/bindings/arm/trbe.txt | 20 ++++++++++++++++++++
1 file changed, 20 insertions(+)
create mode 100644 Documentation/devicetree/bindings/arm/trbe.txt
diff --git a/Documentation/devicetree/bindings/arm/trbe.txt
b/Documentation/devicetree/bindings/arm/trbe.txt
new file mode 100644
index 0000000..001945d
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/trbe.txt
@@ -0,0 +1,20 @@
+* Trace Buffer Extension (TRBE)
+
+Trace Buffer Extension (TRBE) is used for collecting trace data generated
+from a corresponding trace unit (ETE) using an in memory trace buffer.
+
+** TRBE Required properties:
+
+- compatible : should be one of:
+ "arm,trace-buffer-extension"
+
+- interrupts : Exactly 1 PPI must be listed. For heterogeneous systems where
+ TRBE is only supported on a subset of the CPUs, please consult
+ the arm,gic-v3 binding for details on describing a PPI partition.
+
+** Example:
+
+trbe {
+ compatible = "arm,trace-buffer-extension";
+ interrupts = <GIC_PPI 15 IRQ_TYPE_LEVEL_HIGH>;
If only an interrupt, then could just be part of ETE? If not, how is
this hardware block accessed? An interrupt alone is not enough unless
there's some architected way to access.
TRBE hardware block is accessed via respective new system registers but the
PPI number where the IRQ will be triggered for various buffer events, would
depend on the platform as defined in the SBSA.
That is correct. TRBE is accessed via CPU system registers. The IRQ is
specifically
for the TRBE unit to handle buffer overflow situations and other errors in the
buffer handling. Please include this information in the description section of
the bindings.
Also, it may be worth switching this to yaml format.
Suzuki
