From: Uwe Kleine-König <u.kleine-koe...@pengutronix.de> commit 5d78533a0c53af9659227c803df944ba27cd56e0 upstream.
The obvious advantages are: - The linker can drop the watchdog functions if CONFIG_WATCHDOG is off. - All watchdog stuff grouped together with only a single function call left in generic code. - Watchdog register is only read when it is actually used. - Less #ifdefery Signed-off-by: Uwe Kleine-König <u.kleine-koe...@pengutronix.de> Signed-off-by: Alexandre Belloni <alexandre.bell...@bootlin.com> Link: https://lore.kernel.org/r/20200924105256.18162-2-u.kleine-koe...@pengutronix.de Cc: Rasmus Villemoes <rasmus.villem...@prevas.dk> Signed-off-by: Greg Kroah-Hartman <gre...@linuxfoundation.org> --- drivers/rtc/rtc-pcf2127.c | 56 +++++++++++++++++++++++++--------------------- 1 file changed, 31 insertions(+), 25 deletions(-) --- a/drivers/rtc/rtc-pcf2127.c +++ b/drivers/rtc/rtc-pcf2127.c @@ -331,6 +331,36 @@ static const struct watchdog_ops pcf2127 .set_timeout = pcf2127_wdt_set_timeout, }; +static int pcf2127_watchdog_init(struct device *dev, struct pcf2127 *pcf2127) +{ + u32 wdd_timeout; + int ret; + + if (!IS_ENABLED(CONFIG_WATCHDOG)) + return 0; + + pcf2127->wdd.parent = dev; + pcf2127->wdd.info = &pcf2127_wdt_info; + pcf2127->wdd.ops = &pcf2127_watchdog_ops; + pcf2127->wdd.min_timeout = PCF2127_WD_VAL_MIN; + pcf2127->wdd.max_timeout = PCF2127_WD_VAL_MAX; + pcf2127->wdd.timeout = PCF2127_WD_VAL_DEFAULT; + pcf2127->wdd.min_hw_heartbeat_ms = 500; + pcf2127->wdd.status = WATCHDOG_NOWAYOUT_INIT_STATUS; + + watchdog_set_drvdata(&pcf2127->wdd, pcf2127); + + /* Test if watchdog timer is started by bootloader */ + ret = regmap_read(pcf2127->regmap, PCF2127_REG_WD_VAL, &wdd_timeout); + if (ret) + return ret; + + if (wdd_timeout) + set_bit(WDOG_HW_RUNNING, &pcf2127->wdd.status); + + return devm_watchdog_register_device(dev, &pcf2127->wdd); +} + /* Alarm */ static int pcf2127_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm) { @@ -532,7 +562,6 @@ static int pcf2127_probe(struct device * int alarm_irq, const char *name, bool has_nvmem) { struct pcf2127 *pcf2127; - u32 wdd_timeout; int ret = 0; dev_dbg(dev, "%s\n", __func__); @@ -571,17 +600,6 @@ static int pcf2127_probe(struct device * pcf2127->rtc->ops = &pcf2127_rtc_alrm_ops; } - pcf2127->wdd.parent = dev; - pcf2127->wdd.info = &pcf2127_wdt_info; - pcf2127->wdd.ops = &pcf2127_watchdog_ops; - pcf2127->wdd.min_timeout = PCF2127_WD_VAL_MIN; - pcf2127->wdd.max_timeout = PCF2127_WD_VAL_MAX; - pcf2127->wdd.timeout = PCF2127_WD_VAL_DEFAULT; - pcf2127->wdd.min_hw_heartbeat_ms = 500; - pcf2127->wdd.status = WATCHDOG_NOWAYOUT_INIT_STATUS; - - watchdog_set_drvdata(&pcf2127->wdd, pcf2127); - if (has_nvmem) { struct nvmem_config nvmem_cfg = { .priv = pcf2127, @@ -611,19 +629,7 @@ static int pcf2127_probe(struct device * return ret; } - /* Test if watchdog timer is started by bootloader */ - ret = regmap_read(pcf2127->regmap, PCF2127_REG_WD_VAL, &wdd_timeout); - if (ret) - return ret; - - if (wdd_timeout) - set_bit(WDOG_HW_RUNNING, &pcf2127->wdd.status); - -#ifdef CONFIG_WATCHDOG - ret = devm_watchdog_register_device(dev, &pcf2127->wdd); - if (ret) - return ret; -#endif /* CONFIG_WATCHDOG */ + pcf2127_watchdog_init(dev, pcf2127); /* * Disable battery low/switch-over timestamp and interrupts.