On Mon, Jan 4, 2021 at 3:12 PM Jim Quinlan <jim2101...@gmail.com> wrote: > > On Wed, Dec 9, 2020 at 10:07 AM Rob Herring <r...@kernel.org> wrote: > > > > On Mon, Nov 30, 2020 at 04:11:38PM -0500, Jim Quinlan wrote: > > > Quite similar to the regulator bindings found in "rockchip-pcie-host.txt", > > > this allows optional regulators to be attached and controlled by the > > > PCIe RC driver. > > > > > > Signed-off-by: Jim Quinlan <james.quin...@broadcom.com> > > > --- > > > .../devicetree/bindings/pci/brcm,stb-pcie.yaml | 12 ++++++++++++ > > > 1 file changed, 12 insertions(+) > > > > > > diff --git a/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml > > > b/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml > > > index 807694b4f41f..baacc3d7ec87 100644 > > > --- a/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml > > > +++ b/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml > > > @@ -85,6 +85,18 @@ properties: > > > minItems: 1 > > > maxItems: 3 > > > > > > + vpcie12v-supply: > > > + description: 12v regulator phandle for the endpoint device > > > + > > > + vpcie3v3-supply: > > > + description: 3.3v regulator phandle for the endpoint device > > > > 12V and 3.3V are standard slot supplies, can you add them to > > pci-bus.yaml. Then some day maybe we can have common slot handling code. > > > > With that, here you just need: > > > > vpcie3v3-supply: true > > Hi Rob, > > Sorry for the delay in responding -- I just came back from vacation.
NP, me too. > The problem we have is that these regulators are not "slot" supplies > -- our HW does not support PCI slots, so if and when general slot > power-handling code came along it would probably screw us up. If you > don't think there is a problem then I will submit the two supply-names > you OKed, even though they may not match the voltages we are using for > the EPs. Maybe no slots, but you defined the voltages here and they look like standard voltages. Given this is at least the 2nd usage of these properties, it seemed like they should be common. Slot or no physical slot. > For us, the supplies are for the EP chip's power. We have the PCIe > controller turning them "on" for power-on/resume and "off" for > power-off/suspend. We need the "xxx-supply" property in the > controller's DT node because of the chicken-and-egg situation: if the > property was in the EP's DT node, the RC will never discover the EP > to see that there is a regulator to turn on. We would be happy with > a single supply name, something like "ep-power". We would be ecstatic > to have two (ep0-power, ep1-power). The chicken-and-egg problem is nothing new. The same thing has come up for USB, MDIO, MMC/SD to name a few. If devices on a discoverable bus are not discoverable, then they need to be described in DT. I've given suggestions many times how to fix the kernel side. As Mark said, there's no reason you can't look at other nodes for your data. The data a driver needs isn't always nicely packaged up into a single node. The DT structure should match the h/w. The EP is a different device from the PCI host and its supplies belong in its node. Not that if we really wanted to have complete slot support, we'd probably end up having slot nodes in DT. That's generally where we've ended up at for other cases. Now there's a second problem here. If this is not standard PCIe rails which have a defined power sequencing, then you really need to describe the EP device in DT. Otherwise, we don't know what the power sequencing is. I will reject any properties such as delays which try to poorly describe power sequencing in DT. > > I'm not sure if you remember but FlorianF talked to you about this > situation and concluded that something like the above was the way to > go forward. Unless it was last week, assume I don't remember. > For the latest pullreq I just copied Rockchip's bindings > since you reviewed their bindings commit but it looks like you've > changed your mind. Well, no. First, it takes more than one to see a pattern. So yes, how we describe something might evolve. Second, I didn't ask for anything different from Rockchip here. Just move what Rockchip had to a common location to reuse. But your reply has convinced me you need an EP node. > Given the constraints I have described, what is > the best path forward? > > Thanks, > Jim Quinlan > Broadcom STB > > > > > + > > > + vpcie1v8-supply: > > > + description: 1.8v regulator phandle for the endpoint device > > > + > > > + vpcie0v9-supply: > > > + description: 0.9v regulator phandle for the endpoint device > > > > These are not standard. They go to a soldered down device or > > non-standard connector? For the former, the device should really be > > described in DT and the supplies added there. > > > > Mini PCIe connector also has 1.5V supply. > > > > Rob
