Current implementation defaults the hda clocks to clk_m. This causes hda
to run too slow to operate correctly. Fix this by defaulting to pll_p and
setting the frequency to the correct rate.
This matches upstream t124 and downstream t30.
Acked-by: Jon Hunter <jonath...@nvidia.com>
Tested-by: Ion Agorria <i...@agorria.com>
Signed-off-by: Peter Geis <pgwipe...@gmail.com>
---
drivers/clk/tegra/clk-tegra30.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/clk/tegra/clk-tegra30.c b/drivers/clk/tegra/clk-tegra30.c
index 37244a7e68c2..9cf249c344d9 100644
--- a/drivers/clk/tegra/clk-tegra30.c
+++ b/drivers/clk/tegra/clk-tegra30.c
@@ -1256,6 +1256,8 @@ static struct tegra_clk_init_table init_table[]
__initdata = {
{ TEGRA30_CLK_I2S3_SYNC, TEGRA30_CLK_CLK_MAX, 24000000, 0 },
{ TEGRA30_CLK_I2S4_SYNC, TEGRA30_CLK_CLK_MAX, 24000000, 0 },
{ TEGRA30_CLK_VIMCLK_SYNC, TEGRA30_CLK_CLK_MAX, 24000000, 0 },
+ { TEGRA30_CLK_HDA, TEGRA30_CLK_PLL_P, 102000000, 0 },
+ { TEGRA30_CLK_HDA2CODEC_2X, TEGRA30_CLK_PLL_P, 48000000, 0 },
/* must be the last entry */
{ TEGRA30_CLK_CLK_MAX, TEGRA30_CLK_CLK_MAX, 0, 0 },
};
--
2.25.1
