On 08.01.2021 16:45, Claudiu Beznea wrote: > KSZ9131 is used in setups with SAMA7G5. SAMA7G5 supports a special > power saving mode (backup mode) that cuts the power for almost all > parts of the SoC. The rail powering the ethernet PHY is also cut off. > When resuming, in case the PHY has been configured on probe with > slew rate or DLL settings these needs to be restored thus call > driver's config_init() on resume. > When would the SoC enter this backup mode? And would it suspend the MDIO bus before cutting power to the PHY? I'm asking because in mdio_bus_phy_restore() we call phy_init_hw() already (that calls the driver's config_init).
> Signed-off-by: Claudiu Beznea <claudiu.bez...@microchip.com> > --- > drivers/net/phy/micrel.c | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c > index 3fe552675dd2..52d3a0480158 100644 > --- a/drivers/net/phy/micrel.c > +++ b/drivers/net/phy/micrel.c > @@ -1077,7 +1077,7 @@ static int kszphy_resume(struct phy_device *phydev) > */ > usleep_range(1000, 2000); > > - ret = kszphy_config_reset(phydev); > + ret = phydev->drv->config_init(phydev); > if (ret) > return ret; > >