Hi Rob, Thank you for the patch.
On Fri, Jan 08, 2021 at 01:04:24PM +0100, Robert Foss wrote: > Add bindings for qcom,sdm845-camss in order to support the camera > subsystem on SDM845. > > Signed-off-by: Robert Foss <[email protected]> > --- > .../devicetree/bindings/media/qcom,camss.txt | 51 +++++++++++++++---- > 1 file changed, 40 insertions(+), 11 deletions(-) > > diff --git a/Documentation/devicetree/bindings/media/qcom,camss.txt > b/Documentation/devicetree/bindings/media/qcom,camss.txt > index 498234629e21..276c5d0c25cb 100644 > --- a/Documentation/devicetree/bindings/media/qcom,camss.txt > +++ b/Documentation/devicetree/bindings/media/qcom,camss.txt > @@ -9,6 +9,7 @@ Qualcomm Camera Subsystem > - "qcom,msm8916-camss" > - "qcom,msm8996-camss" > - "qcom,sdm660-camss" > + - "qcom,sdm845-camss" > - reg: > Usage: required > Value type: <prop-encoded-array> > @@ -18,19 +19,21 @@ Qualcomm Camera Subsystem > Value type: <stringlist> > Definition: Should contain the following entries: > - "csiphy0" > - - "csiphy0_clk_mux" > + - "csiphy0_clk_mux" (not 845) > - "csiphy1" > - - "csiphy1_clk_mux" > - - "csiphy2" (8996 only) > + - "csiphy1_clk_mux" (not 845) > + - "csiphy2" (8996 & 845) > - "csiphy2_clk_mux" (8996 only) > + - "csiphy3" (845 only) > - "csid0" > - "csid1" > - - "csid2" (8996 only) > - - "csid3" (8996 only) > + - "csid2" (8996 & 845) > + - "csid3" (8996 & 845) > - "ispif" > - - "csi_clk_mux" > + - "csi_clk_mux" (not 845) > - "vfe0" > - - "vfe1" (8996 only) > + - "vfe1" (8996 & 845) > + - "vfe_lite" (845 only) All this would be more readable after a conversion to YAML ;-) > - interrupts: > Usage: required > Value type: <prop-encoded-array> > @@ -41,14 +44,16 @@ Qualcomm Camera Subsystem > Definition: Should contain the following entries: > - "csiphy0" > - "csiphy1" > - - "csiphy2" (8996 only) > + - "csiphy2" (8996 & 845) > + - "csiphy3" (845 only) > - "csid0" > - "csid1" > - - "csid2" (8996 only) > + - "csid2" (8996 & 845) > - "csid3" (8996 only) > - "ispif" > - "vfe0" > - - "vfe1" (8996 only) > + - "vfe1" (8996 & 845) > + - "vfe_lite" (845 only) > - power-domains: > Usage: required > Value type: <prop-encoded-array> > @@ -67,27 +72,40 @@ Qualcomm Camera Subsystem > - "top_ahb" > - "throttle_axi" (660 only) > - "ispif_ahb" > + - "camnoc_axi" (845 only) > + - "cpas_ahb" (845 only) > + - "cphy_rx_src" (856 only) > - "csiphy0_timer" > + - "csiphy0" (845 only) > + - "csiphy0_timer_src" (845 only) > - "csiphy1_timer" > - - "csiphy2_timer" (8996 only) > + - "csiphy2" (845 only) > + - "csiphy2_timer_src" (845 only) > + - "csiphy2_timer" (8996 & 845) > + - "csiphy3" (845 only) > + - "csiphy3_timer_src" (845 only) > + - "csiphy3_timer" (845 only) > - "csiphy_ahb2crif" (660 only) > - "csi0_ahb" > - "csi0" > - "csi0_phy" > - "csi0_pix" > - "csi0_rdi" > + - "csi0_src" (845 only) > - "cphy_csid0" (660 only) > - "csi1_ahb" > - "csi1" > - "csi1_phy" > - "csi1_pix" > - "csi1_rdi" > + - "csi1_src" (845 only) > - "cphy_csid1" (660 only) > - "csi2_ahb" (8996 only) > - "csi2" (8996 only) > - "csi2_phy" (8996 only) > - "csi2_pix" (8996 only) > - "csi2_rdi" (8996 only) > + - "csi2_src" (845 only) > - "cphy_csid2" (660 only) > - "csi3_ahb" (8996 only) > - "csi3" (8996 only) > @@ -96,14 +114,25 @@ Qualcomm Camera Subsystem > - "csi3_rdi" (8996 only) > - "cphy_csid3" (660 only) > - "ahb" > + - "slow_ahb_src" (845 only) > + - "soc_ahb" (845 only) > - "vfe0" > - "csi_vfe0" > - "vfe0_ahb", (8996 only) > + - "vfe0_cphy_rx" (845 only) > + - "vfe0_axi", (845 only) > + - "vfe0_src", (845 only) > - "vfe0_stream", (8996 only) > - "vfe1", (8996 only) > - "csi_vfe1", (8996 only) > - "vfe1_ahb", (8996 only) > + - "vfe1_cphy_rx" (845 only) > + - "vfe1_axi", (845 only) > + - "vfe1_src", (845 only) > - "vfe1_stream", (8996 only) > + - "vfe_lite_axi", (845 only) > + - "vfe_lite_cphy_rx" (845 only) > + - "vfe_lite_src", (845 only) > - "vfe_ahb" > - "vfe_axi" > - vdda-supply: -- Regards, Laurent Pinchart
