The WiFi chip is capable of communication at SDR104 speeds.
Enable 100Mhz and 200MHz pinmux to support this.
Signed-off-by: Adam Ford <aford...@gmail.com>
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-beacon-som.dtsi
b/arch/arm64/boot/dts/freescale/imx8mm-beacon-som.dtsi
index d897913537ca..988f8ab679ad 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-beacon-som.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-beacon-som.dtsi
@@ -256,8 +256,10 @@ bluetooth {
&usdhc1 {
#address-cells = <1>;
#size-cells = <0>;
- pinctrl-names = "default";
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
pinctrl-0 = <&pinctrl_usdhc1>;
+ pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+ pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
bus-width = <4>;
non-removable;
cap-power-off-card;
--
2.25.1
