The patch adds the RapidIO support to powerpc with of-device support.
New Serial RapidIO of new Freescale processor, such as MPC8548, MPC8568,
is also added.
Signed-off-by: Zhang Wei <[EMAIL PROTECTED]>
---
arch/powerpc/Kconfig | 12 +
arch/powerpc/platforms/85xx/Kconfig | 1 +
arch/powerpc/platforms/86xx/Kconfig | 1 +
arch/powerpc/sysdev/Makefile | 1 +
arch/powerpc/sysdev/fsl_rio.c | 1130 ++++++++++++++++++++++++++---------
5 files changed, 861 insertions(+), 284 deletions(-)
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index 18f397c..ee27b77 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -523,6 +523,18 @@ source "drivers/pci/Kconfig"
source "drivers/pcmcia/Kconfig"
+config FSL_RAPIDIO
+ bool
+ default n
+
+config RAPIDIO
+ bool "RapidIO support" if FSL_RAPIDIO
+ help
+ If you say Y here, the kernel will include drivers and
+ infrastructure code to support RapidIO interconnect devices.
+
+source "drivers/rapidio/Kconfig"
+
source "drivers/pci/hotplug/Kconfig"
endmenu
diff --git a/arch/powerpc/platforms/85xx/Kconfig
b/arch/powerpc/platforms/85xx/Kconfig
index 7748a3a..09c522d 100644
--- a/arch/powerpc/platforms/85xx/Kconfig
+++ b/arch/powerpc/platforms/85xx/Kconfig
@@ -56,6 +56,7 @@ config MPC85xx
select PPC_UDBG_16550
select PPC_INDIRECT_PCI if PCI
select MPIC
+ select FSL_RAPIDIO
select FSL_PCI if PCI
select SERIAL_8250_SHARE_IRQ if SERIAL_8250
default y if MPC8540_ADS || MPC85xx_CDS || MPC8560_ADS \
diff --git a/arch/powerpc/platforms/86xx/Kconfig
b/arch/powerpc/platforms/86xx/Kconfig
index 21d1135..a6a6593 100644
--- a/arch/powerpc/platforms/86xx/Kconfig
+++ b/arch/powerpc/platforms/86xx/Kconfig
@@ -24,6 +24,7 @@ config MPC8641
select FSL_PCI if PCI
select PPC_UDBG_16550
select MPIC
+ select FSL_RAPIDIO
default y if MPC8641_HPCN
config MPC8610
diff --git a/arch/powerpc/sysdev/Makefile b/arch/powerpc/sysdev/Makefile
index 99a77d7..073d197 100644
--- a/arch/powerpc/sysdev/Makefile
+++ b/arch/powerpc/sysdev/Makefile
@@ -12,6 +12,7 @@ obj-$(CONFIG_U3_DART) += dart_iommu.o
obj-$(CONFIG_MMIO_NVRAM) += mmio_nvram.o
obj-$(CONFIG_FSL_SOC) += fsl_soc.o
obj-$(CONFIG_FSL_PCI) += fsl_pci.o
+obj-$(CONFIG_FSL_RAPIDIO) += fsl_rio.o
obj-$(CONFIG_TSI108_BRIDGE) += tsi108_pci.o tsi108_dev.o
obj-$(CONFIG_QUICC_ENGINE) += qe_lib/
obj-$(CONFIG_PPC_BESTCOMM) += bestcomm/
diff --git a/arch/powerpc/sysdev/fsl_rio.c b/arch/powerpc/sysdev/fsl_rio.c
index af2425e..525066c 100644
--- a/arch/powerpc/sysdev/fsl_rio.c
+++ b/arch/powerpc/sysdev/fsl_rio.c
@@ -1,5 +1,8 @@
/*
- * MPC85xx RapidIO support
+ * Freescale PowerPC RapidIO support
+ *
+ * Copyright (C) 2007 Freescale Semiconductor, Inc. All rights reserved.
+ * Zhang Wei <[EMAIL PROTECTED]>, Jun 2007
*
* Copyright 2005 MontaVista Software, Inc.
* Matt Porter <[EMAIL PROTECTED]>
@@ -8,6 +11,13 @@
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
+ *
+ * Changelog:
+ * Jun 2007 Zhang Wei <[EMAIL PROTECTED]>
+ * - This file is moved from arch/ppc/ppc85xx_rio.c. And the OF-tree support
+ * is added. New silicons such as MPC8548, MPC8641 are all supported.
+ * Memory driver hardware operations are added.
+ *
*/
#include <linux/init.h>
@@ -17,14 +27,41 @@
#include <linux/interrupt.h>
#include <linux/rio.h>
#include <linux/rio_drv.h>
+#include <linux/of_device.h>
+#include <linux/of_platform.h>
#include <asm/io.h>
+#include <asm/prom.h>
+#include "fsl_soc.h"
+
+/* RapidIO definition irq, which read from OF-tree */
+#define IRQ_RIO_BELL(m) (((struct rio_priv
*)(m->priv))->bellirq)
+#define IRQ_RIO_TX(m) (((struct rio_priv *)(m->priv))->txirq)
+#define IRQ_RIO_RX(m) (((struct rio_priv *)(m->priv))->rxirq)
+
+#define ERR(fmt, arg...) \
+ printk(KERN_ERR "RIO %s: " fmt, __FUNCTION__, ## arg)
+#define INFO(fmt...) printk(KERN_INFO "RIO: " fmt)
+#define IS_64BIT_RES ((sizeof(resource_size_t) == 8) ? 1 : 0)
-#define RIO_REGS_BASE (CCSRBAR + 0xc0000)
#define RIO_ATMU_REGS_OFFSET 0x10c00
-#define RIO_MSG_REGS_OFFSET 0x11000
+#define RIO_P_MSG_REGS_OFFSET 0x11000
+#define RIO_S_MSG_REGS_OFFSET 0x13000
+#define RIO_ESCSR 0x158
+#define RIO_CCSR 0x15c
+#define RIO_ISR_AACR 0x10120
+#define RIO_ISR_AACR_AA 0x1 /* Accept All ID */
#define RIO_MAINT_WIN_SIZE 0x400000
#define RIO_DBELL_WIN_SIZE 0x1000
+#define RIO_MAX_INB_ATMU 4
+#define RIO_MAX_OUTB_ATMU 8
+#define RIO_INB_ATMU_REGS_OFFSET 0x10de0
+#define RIO_ATMU_EN_MASK 0x80000000
+
+#define RIO_NREAD 0x4
+#define RIO_NWRITE 0x4
+#define RIO_NWRITE_R 0x5
+#define RIO_NREAD_R 0x5
#define RIO_MSG_OMR_MUI 0x00000002
#define RIO_MSG_OSR_TE 0x00000080
@@ -50,24 +87,33 @@
#define DOORBELL_DSR_TE 0x00000080
#define DOORBELL_DSR_QFI 0x00000010
#define DOORBELL_DSR_DIQI 0x00000001
-#define DOORBELL_TID_OFFSET 0x03
-#define DOORBELL_SID_OFFSET 0x05
+#define DOORBELL_TID_OFFSET 0x02
+#define DOORBELL_SID_OFFSET 0x04
#define DOORBELL_INFO_OFFSET 0x06
#define DOORBELL_MESSAGE_SIZE 0x08
-#define DBELL_SID(x) (*(u8 *)(x + DOORBELL_SID_OFFSET))
-#define DBELL_TID(x) (*(u8 *)(x + DOORBELL_TID_OFFSET))
+#define DBELL_SID(x) (*(u16 *)(x + DOORBELL_SID_OFFSET))
+#define DBELL_TID(x) (*(u16 *)(x + DOORBELL_TID_OFFSET))
#define DBELL_INF(x) (*(u16 *)(x + DOORBELL_INFO_OFFSET))
struct rio_atmu_regs {
u32 rowtar;
- u32 pad1;
+ u32 rowtear;
u32 rowbar;
u32 pad2;
u32 rowar;
u32 pad3[3];
};
+struct rio_inb_atmu_regs {
+ u32 riwtar;
+ u32 pad1;
+ u32 riwbar;
+ u32 pad2;
+ u32 riwar;
+ u32 pad3[3];
+};
+
struct rio_msg_regs {
u32 omr;
u32 osr;
@@ -87,7 +133,15 @@ struct rio_msg_regs {
u32 ifqdpar;
u32 pad6;
u32 ifqepar;
- u32 pad7[250];
+ u32 pad7[226];
+ u32 odmr;
+ u32 odsr;
+ u32 res0[4];
+ u32 oddpr;
+ u32 oddatr;
+ u32 res1[3];
+ u32 odretcr;
+ u32 res2[12];
u32 dmr;
u32 dsr;
u32 pad8;
@@ -112,20 +166,12 @@ struct rio_tx_desc {
u32 res4;
};
-static u32 regs_win;
-static struct rio_atmu_regs *atmu_regs;
-static struct rio_atmu_regs *maint_atmu_regs;
-static struct rio_atmu_regs *dbell_atmu_regs;
-static u32 dbell_win;
-static u32 maint_win;
-static struct rio_msg_regs *msg_regs;
-
-static struct rio_dbell_ring {
+struct rio_dbell_ring {
void *virt;
dma_addr_t phys;
-} dbell_ring;
+};
-static struct rio_msg_tx_ring {
+struct rio_msg_tx_ring {
void *virt;
dma_addr_t phys;
void *virt_buffer[RIO_MAX_TX_RING_SIZE];
@@ -133,77 +179,110 @@ static struct rio_msg_tx_ring {
int tx_slot;
int size;
void *dev_id;
-} msg_tx_ring;
+};
-static struct rio_msg_rx_ring {
+struct rio_msg_rx_ring {
void *virt;
dma_addr_t phys;
void *virt_buffer[RIO_MAX_RX_RING_SIZE];
int rx_slot;
int size;
void *dev_id;
-} msg_rx_ring;
+};
+
+struct rio_priv {
+ volatile void __iomem *regs_win;
+ volatile struct rio_atmu_regs __iomem *atmu_regs;
+ volatile struct rio_atmu_regs __iomem *maint_atmu_regs;
+ volatile struct rio_atmu_regs __iomem *dbell_atmu_regs;
+ volatile void __iomem *dbell_win;
+ volatile void __iomem *maint_win;
+ volatile struct rio_msg_regs __iomem *msg_regs;
+ struct rio_dbell_ring dbell_ring;
+ struct rio_msg_tx_ring msg_tx_ring;
+ struct rio_msg_rx_ring msg_rx_ring;
+ int bellirq;
+ int txirq;
+ int rxirq;
+};
/**
- * mpc85xx_rio_doorbell_send - Send a MPC85xx doorbell message
+ * fsl_rio_doorbell_send - Send a RapidIO doorbell message
* @index: ID of RapidIO interface
* @destid: Destination ID of target device
* @data: 16-bit info field of RapidIO doorbell message
*
- * Sends a MPC85xx doorbell message. Returns %0 on success or
+ * Sends a RapidIO doorbell message. Returns %0 on success or
* %-EINVAL on failure.
*/
-static int mpc85xx_rio_doorbell_send(int index, u16 destid, u16 data)
+static int fsl_rio_doorbell_send(struct rio_mport *mport, int index, u16
destid, u16 data)
{
- pr_debug("mpc85xx_doorbell_send: index %d destid %4.4x data %4.4x\n",
- index, destid, data);
- out_be32((void *)&dbell_atmu_regs->rowtar, destid << 22);
- out_be16((void *)(dbell_win), data);
+ struct rio_priv *priv = mport->priv;
+ pr_debug("fsl_doorbell_send: index %d destid 0x%04x data 0x%04x\n",
+ index, destid, data);
+
+ switch (mport->phy_type) {
+ case RIO_PHY_SERIAL:
+ /* In the later version silicons, such as MPC8548, MPC8641,
+ * below operations is must be.
+ */
+ out_be32(&priv->msg_regs->odmr, 0x00000000);
+ out_be32(&priv->msg_regs->odretcr, 0x00000004);
+ out_be32(&priv->msg_regs->oddpr, destid << 16);
+ out_be32(&priv->msg_regs->oddatr,data );
+ out_be32(&priv->msg_regs->odmr, 0x00000001);
+ break;
+ case RIO_PHY_PARALLEL:
+ out_be32(&priv->dbell_atmu_regs->rowtar, destid << 22);
+ out_be16(priv->dbell_win, data);
+ break;
+ }
return 0;
}
/**
- * mpc85xx_local_config_read - Generate a MPC85xx local config space read
+ * fsl_local_config_read - Generate a RapidIO local config space read
* @index: ID of RapdiIO interface
* @offset: Offset into configuration space
* @len: Length (in bytes) of the maintenance transaction
* @data: Value to be read into
*
- * Generates a MPC85xx local configuration space read. Returns %0 on
+ * Generates a RapidIO local configuration space read. Returns %0 on
* success or %-EINVAL on failure.
*/
-static int mpc85xx_local_config_read(int index, u32 offset, int len, u32 *
data)
+static int fsl_local_config_read(struct rio_mport *mport, int index, u32
offset, int len, u32 * data)
{
- pr_debug("mpc85xx_local_config_read: index %d offset %8.8x\n", index,
- offset);
- *data = in_be32((void *)(regs_win + offset));
+ struct rio_priv *priv = mport->priv;
+ pr_debug("fsl_local_config_read: index %d offset 0x%08x\n", index,
+ offset);
+ *data = in_be32(priv->regs_win + offset);
return 0;
}
/**
- * mpc85xx_local_config_write - Generate a MPC85xx local config space write
+ * fsl_local_config_write - Generate a RapidIO local config space write
* @index: ID of RapdiIO interface
* @offset: Offset into configuration space
* @len: Length (in bytes) of the maintenance transaction
* @data: Value to be written
*
- * Generates a MPC85xx local configuration space write. Returns %0 on
+ * Generates a RapidIO local configuration space write. Returns %0 on
* success or %-EINVAL on failure.
*/
-static int mpc85xx_local_config_write(int index, u32 offset, int len, u32 data)
+static int fsl_local_config_write(struct rio_mport *mport, int index, u32
offset, int len, u32 data)
{
- pr_debug
- ("mpc85xx_local_config_write: index %d offset %8.8x data %8.8x\n",
- index, offset, data);
- out_be32((void *)(regs_win + offset), data);
+ struct rio_priv *priv = mport->priv;
+ pr_debug("fsl_local_config_write: index %d offset 0x%08x data 0x%08x\n",
+ index, offset, data);
+ out_be32(priv->regs_win + offset, data);
return 0;
}
/**
- * mpc85xx_rio_config_read - Generate a MPC85xx read maintenance transaction
+ * fsl_rio_config_read - Generate a read maintenance transaction
* @index: ID of RapdiIO interface
* @destid: Destination ID of transaction
* @hopcount: Number of hops to target device
@@ -211,31 +290,33 @@ static int mpc85xx_local_config_write(int index, u32
offset, int len, u32 data)
* @len: Length (in bytes) of the maintenance transaction
* @val: Location to be read into
*
- * Generates a MPC85xx read maintenance transaction. Returns %0 on
+ * Generates a read maintenance transaction. Returns %0 on
* success or %-EINVAL on failure.
*/
-static int
-mpc85xx_rio_config_read(int index, u16 destid, u8 hopcount, u32 offset, int
len,
- u32 * val)
+static int fsl_rio_config_read(struct rio_mport *mport, int index, u16 destid,
+ u8 hopcount, u32 offset, int len, u32 * val)
{
- u8 *data;
-
- pr_debug
- ("mpc85xx_rio_config_read: index %d destid %d hopcount %d offset
%8.8x len %d\n",
- index, destid, hopcount, offset, len);
- out_be32((void *)&maint_atmu_regs->rowtar,
- (destid << 22) | (hopcount << 12) | ((offset & ~0x3) >> 9));
-
- data = (u8 *) maint_win + offset;
+ volatile void __iomem *data;
+ struct rio_priv *priv = mport->priv;
+
+ pr_debug("fsl_rio_config_read: index %d destid %d hopcount %d "
+ "offset 0x%08x len %d\n",
+ index, destid, hopcount, offset, len);
+ out_be32(&priv->maint_atmu_regs->rowtar,
+ ((destid & 0x3ff) << 22) | (hopcount << 12)
+ | ((offset & ~0x3) >> 9));
+ out_be32(&priv->maint_atmu_regs->rowtear, (destid & 0xfc00) >> 10);
+
+ data = priv->maint_win + offset;
switch (len) {
case 1:
- *val = in_8((u8 *) data);
+ *val = in_8(data);
break;
case 2:
- *val = in_be16((u16 *) data);
+ *val = in_be16(data);
break;
default:
- *val = in_be32((u32 *) data);
+ *val = in_be32(data);
break;
}
@@ -243,7 +324,7 @@ mpc85xx_rio_config_read(int index, u16 destid, u8 hopcount,
u32 offset, int len,
}
/**
- * mpc85xx_rio_config_write - Generate a MPC85xx write maintenance transaction
+ * fsl_rio_config_write - Generate a write maintenance transaction
* @index: ID of RapdiIO interface
* @destid: Destination ID of transaction
* @hopcount: Number of hops to target device
@@ -251,30 +332,32 @@ mpc85xx_rio_config_read(int index, u16 destid, u8
hopcount, u32 offset, int len,
* @len: Length (in bytes) of the maintenance transaction
* @val: Value to be written
*
- * Generates an MPC85xx write maintenance transaction. Returns %0 on
+ * Generates an write maintenance transaction. Returns %0 on
* success or %-EINVAL on failure.
*/
-static int
-mpc85xx_rio_config_write(int index, u16 destid, u8 hopcount, u32 offset,
- int len, u32 val)
+static int fsl_rio_config_write(struct rio_mport *mport, int index, u16 destid,
+ u8 hopcount, u32 offset, int len, u32 val)
{
- u8 *data;
- pr_debug
- ("mpc85xx_rio_config_write: index %d destid %d hopcount %d offset
%8.8x len %d val %8.8x\n",
- index, destid, hopcount, offset, len, val);
- out_be32((void *)&maint_atmu_regs->rowtar,
- (destid << 22) | (hopcount << 12) | ((offset & ~0x3) >> 9));
-
- data = (u8 *) maint_win + offset;
+ volatile void __iomem *data;
+ struct rio_priv *priv = mport->priv;
+ pr_debug("fsl_rio_config_write: index %d destid %d hopcount %d"
+ "offset 0x%08x len %d val 0x%08x\n",
+ index, destid, hopcount, offset, len, val);
+ out_be32(&priv->maint_atmu_regs->rowtar,
+ ((destid & 0x3ff) << 22) | (hopcount << 12)
+ | ((offset & ~0x3) >> 9));
+ out_be32(&priv->maint_atmu_regs->rowtear, (destid & 0xfc00) >> 10);
+
+ data = priv->maint_win + offset;
switch (len) {
case 1:
- out_8((u8 *) data, val);
+ out_8(data, val);
break;
case 2:
- out_be16((u16 *) data, val);
+ out_be16(data, val);
break;
default:
- out_be32((u32 *) data, val);
+ out_be32(data, val);
break;
}
@@ -282,28 +365,204 @@ mpc85xx_rio_config_write(int index, u16 destid, u8
hopcount, u32 offset,
}
/**
- * rio_hw_add_outb_message - Add message to the MPC85xx outbound message queue
+ * fsl_rio_map_inb_mem -- Mapping inbound memory region.
+ * @lstart: Local memory space start address.
+ * @rstart: RapidIO space start address.
+ * @size: The mapping region size.
+ * @flags: Flags for mapping. 0 for using default flags.
+ *
+ * Return: 0 -- Success.
+ *
+ * This function will create the inbound mapping
+ * from rstart to lstart.
+ */
+static int fsl_rio_map_inb_mem(struct rio_mport *mport, resource_size_t lstart,
+ resource_size_t rstart, resource_size_t size,
+ u32 flags)
+{
+ int i;
+ struct rio_priv *priv = mport->priv;
+ volatile struct rio_inb_atmu_regs __iomem *inbatmu =
+ (struct rio_inb_atmu_regs *)
+ (priv->regs_win + RIO_INB_ATMU_REGS_OFFSET) - 1;
+ int size_ffs;
+ resource_size_t align;
+
+ if (flags == 0)
+ flags = (RIO_NREAD_R << 4) | RIO_NWRITE_R;
+
+ align = (size < 0x1000) ? 0x1000 : 1 << (__ilog2(size - 1) + 1);
+
+ /* Align the size */
+ if ((lstart + size) > (_ALIGN_DOWN(lstart, align) + align)) {
+ size_ffs = __ffs(_ALIGN_DOWN(lstart + size - 1, align));
+ size = 1 << (size_ffs + (((_ALIGN_DOWN(lstart, 1 << size_ffs) +
+ (1 << size_ffs)) < (lstart + size)) ? 1 : 0));
+ } else
+ size = align;
+
+ if ((lstart & (size - 1)) != (rstart & (size - 1))) {
+ ERR("The local address 0x%x can not be aligned to the same size"
+ " 0x%x with the RapidIO space address 0x%x!\n", lstart,
+ size, rstart);
+ return -EINVAL;
+ }
+
+ /* Search for free inbound ATMU */
+ for (i = 1;
+ (i <= RIO_MAX_INB_ATMU) && (inbatmu->riwar & RIO_ATMU_EN_MASK);
+ i++, inbatmu--)
+ ;
+
+ if (i > RIO_MAX_INB_ATMU) {
+ ERR("No free inbound ATMU!\n");
+ return -EBUSY;
+ }
+ out_be32(&inbatmu->riwtar, ((IS_64BIT_RES ? (lstart >> 32)
+ & 0xf : 0) << 20) | ((lstart >> 12) & 0xfffff));
+ out_be32(&inbatmu->riwbar, ((IS_64BIT_RES ? (rstart >> 32)
+ & 0x3 : 0) << 20) | ((rstart >> 12) & 0xfffff));
+ out_be32(&inbatmu->riwar, 0x80000000 | (0xf << 20)
+ | ((flags & 0xff) << 12)
+ | (__ilog2(size) - 1));
+ return 0;
+}
+
+/**
+ * fsl_rio_map_outb_mem -- Mapping outbound memory region.
+ * @lstart: Local memory space start address.
+ * @rstart: RapidIO space start address.
+ * @size: The mapping region size.
+ * @tid: The target RapidIO device id.
+ * @flags: Flags for mapping. 0 for using default flags.
+ *
+ * Return: 0 -- Success.
+ *
+ * This function will create the outbound mapping
+ * from lstart to rstart.
+ */
+static int fsl_rio_map_outb_mem(struct rio_mport *mport, resource_size_t
lstart,
+ resource_size_t rstart, resource_size_t size,
+ u16 tid, u32 flags)
+{
+ int i;
+ struct rio_priv *priv = mport->priv;
+ volatile struct rio_atmu_regs __iomem *outbatmu =
+ (struct rio_atmu_regs *)
+ (priv->regs_win + RIO_ATMU_REGS_OFFSET) + 1;
+ int size_ffs;
+ resource_size_t align;
+
+ if (flags == 0)
+ flags = (RIO_NREAD << 4) | RIO_NWRITE_R;
+
+ align = (size < 0x1000) ? 0x1000 : 1 << (__ilog2(size - 1) + 1);
+
+ /* Align the size */
+ if ((lstart + size) > (_ALIGN_DOWN(lstart, align) + align)) {
+ size_ffs = __ffs(_ALIGN_DOWN(lstart + size - 1, align));
+ size = 1 << (size_ffs + (((_ALIGN_DOWN(lstart, 1 << size_ffs) +
+ (1 << size_ffs)) < (lstart + size)) ? 1 : 0));
+ } else
+ size = align;
+
+ if ((lstart & (size - 1)) != (rstart & (size - 1))) {
+ ERR("The local address 0x%x can not be aligned to the same size"
+ " 0x%x with the RapidIO space address 0x%x!\n", lstart,
+ size, rstart);
+ return -EINVAL;
+ }
+
+ /* Search for free outbound ATMU */
+ for (i = 1;
+ (i <= RIO_MAX_OUTB_ATMU) && (outbatmu->rowar & RIO_ATMU_EN_MASK);
+ i++, outbatmu++)
+ ;
+
+ if (i > RIO_MAX_OUTB_ATMU) {
+ ERR("No free outbound ATMU!\n");
+ return -EBUSY;
+ }
+ out_be32(&outbatmu->rowtar, ((tid & 0x3ff) << 22)
+ | ((IS_64BIT_RES ? (rstart >> 32) & 0x3 : 0) << 20)
+ | ((rstart >> 12) & 0xfffff));
+ if (mport->phy_type == RIO_PHY_SERIAL)
+ out_be32(&outbatmu->rowtear, tid >> 10);
+ out_be32(&outbatmu->rowbar, ((IS_64BIT_RES ?
+ (lstart >> 32) & 0xf : 0) << 20)
+ | ((lstart >> 12) & 0xfffff));
+ out_be32(&outbatmu->rowar, 0x80000000
+ | ((flags & 0xff) << 12)
+ | (__ilog2(size) - 1));
+ return 0;
+}
+
+/**
+ * fsl_rio_unmap_inb_mem -- Unmapping inbound memory region.
+ * @lstart: Local memory space start address.
+ */
+static void fsl_rio_unmap_inb_mem(struct rio_mport *mport, resource_size_t
lstart)
+{
+ int i;
+ struct rio_priv *priv = mport->priv;
+ volatile struct rio_inb_atmu_regs __iomem *inbatmu = (struct
rio_inb_atmu_regs *)
+ (priv->regs_win + RIO_INB_ATMU_REGS_OFFSET) - 1;
+
+ /* Search for inbound ATMU */
+ for (i = 1; i <= RIO_MAX_INB_ATMU ; i++, inbatmu--) {
+ u32 tar = ((IS_64BIT_RES ? (lstart >> 32) & 0xf : 0) << 20)
+ | ((lstart >> 12) & 0xfffff);
+ if (inbatmu->riwtar == tar) {
+ out_be32(&inbatmu->riwar, ~(RIO_ATMU_EN_MASK));
+ return;
+ }
+ }
+}
+
+/**
+ * fsl_rio_unmap_inb_mem -- Unmapping outbound memory region.
+ * @lstart: Local memory space start address.
+ */
+static void fsl_rio_unmap_outb_mem(struct rio_mport *mport, resource_size_t
lstart)
+{
+ int i;
+ struct rio_priv *priv = mport->priv;
+ volatile struct rio_atmu_regs __iomem *outbatmu = (struct rio_atmu_regs
*)
+ (priv->regs_win + RIO_ATMU_REGS_OFFSET) + 1;
+
+ /* Search for outbound ATMU */
+ for (i = 1; i <= RIO_MAX_OUTB_ATMU ; i++, outbatmu++) {
+ u32 bar = ((IS_64BIT_RES ? (lstart >> 32) & 0xf : 0) << 20)
+ | ((lstart >> 12) & 0xfffff);
+ if (outbatmu->rowbar == bar) {
+ out_be32(&outbatmu->rowar, ~(RIO_ATMU_EN_MASK));
+ return;
+ }
+ }
+}
+
+/**
+ * rio_hw_add_outb_message - Add message to the outbound message queue
* @mport: Master port with outbound message queue
* @rdev: Target of outbound message
* @mbox: Outbound mailbox
* @buffer: Message to add to outbound queue
* @len: Length of message
*
- * Adds the @buffer message to the MPC85xx outbound message queue. Returns
+ * Adds the @buffer message to the outbound message queue. Returns
* %0 on success or %-EINVAL on failure.
*/
-int
-rio_hw_add_outb_message(struct rio_mport *mport, struct rio_dev *rdev, int
mbox,
- void *buffer, size_t len)
+int rio_hw_add_outb_message(struct rio_mport *mport, struct rio_dev *rdev,
+ int mbox, void *buffer, size_t len)
{
- u32 omr;
+ struct rio_priv *priv = mport->priv;
struct rio_tx_desc *desc =
- (struct rio_tx_desc *)msg_tx_ring.virt + msg_tx_ring.tx_slot;
+ (struct rio_tx_desc *)priv->msg_tx_ring.virt +
priv->msg_tx_ring.tx_slot;
int ret = 0;
- pr_debug
- ("RIO: rio_hw_add_outb_message(): destid %4.4x mbox %d buffer %8.8x
len %8.8x\n",
- rdev->destid, mbox, (int)buffer, len);
+ pr_debug("RIO: rio_hw_add_outb_message(): "
+ "destid 0x%04x mbox %d buffer %p len 0x%08x\n",
+ rdev->destid, mbox, buffer, len);
if ((len < 8) || (len > RIO_MAX_MSG_SIZE)) {
ret = -EINVAL;
@@ -311,31 +570,40 @@ rio_hw_add_outb_message(struct rio_mport *mport, struct
rio_dev *rdev, int mbox,
}
/* Copy and clear rest of buffer */
- memcpy(msg_tx_ring.virt_buffer[msg_tx_ring.tx_slot], buffer, len);
+ memcpy(priv->msg_tx_ring.virt_buffer[priv->msg_tx_ring.tx_slot],
buffer, len);
if (len < (RIO_MAX_MSG_SIZE - 4))
- memset((void *)((u32) msg_tx_ring.
- virt_buffer[msg_tx_ring.tx_slot] + len), 0,
- RIO_MAX_MSG_SIZE - len);
+ memset(priv->msg_tx_ring.virt_buffer[priv->msg_tx_ring.tx_slot]
+ + len, 0, RIO_MAX_MSG_SIZE - len);
- /* Set mbox field for message */
- desc->dport = mbox & 0x3;
+ switch(mport->phy_type) {
+ case RIO_PHY_SERIAL:
+ /* Set mbox field for message, and set destid */
+ desc->dport = (rdev->destid << 16) | ( mbox & 0x3);
- /* Enable EOMI interrupt, set priority, and set destid */
- desc->dattr = 0x28000000 | (rdev->destid << 2);
+ /* Enable EOMI interrupt and priority */
+ desc->dattr = 0x28000000;
+
+ /* Set mbox field for message */
+ desc->dport = mbox & 0x3;
+ break;
+ case RIO_PHY_PARALLEL:
+ /* Enable EOMI interrupt, set priority, and set destid */
+ desc->dattr = 0x28000000 | (rdev->destid << 2);
+ break;
+ }
/* Set transfer size aligned to next power of 2 (in double words) */
desc->dwcnt = is_power_of_2(len) ? len : 1 << get_bitmask_order(len);
/* Set snooping and source buffer address */
- desc->saddr = 0x00000004 | msg_tx_ring.phys_buffer[msg_tx_ring.tx_slot];
+ desc->saddr = 0x00000004 |
priv->msg_tx_ring.phys_buffer[priv->msg_tx_ring.tx_slot];
/* Increment enqueue pointer */
- omr = in_be32((void *)&msg_regs->omr);
- out_be32((void *)&msg_regs->omr, omr | RIO_MSG_OMR_MUI);
+ setbits32(&priv->msg_regs->omr, RIO_MSG_OMR_MUI);
/* Go to next descriptor */
- if (++msg_tx_ring.tx_slot == msg_tx_ring.size)
- msg_tx_ring.tx_slot = 0;
+ if (++priv->msg_tx_ring.tx_slot == priv->msg_tx_ring.size)
+ priv->msg_tx_ring.tx_slot = 0;
out:
return ret;
@@ -344,40 +612,40 @@ rio_hw_add_outb_message(struct rio_mport *mport, struct
rio_dev *rdev, int mbox,
EXPORT_SYMBOL_GPL(rio_hw_add_outb_message);
/**
- * mpc85xx_rio_tx_handler - MPC85xx outbound message interrupt handler
+ * fsl_rio_tx_handler - outbound message interrupt handler
* @irq: Linux interrupt number
* @dev_instance: Pointer to interrupt-specific data
*
* Handles outbound message interrupts. Executes a register outbound
- * mailbox event handler and acks the interrupt occurrence.
+ * mailbox event handler and acks the interrupt occurence.
*/
-static irqreturn_t
-mpc85xx_rio_tx_handler(int irq, void *dev_instance)
+static irqreturn_t fsl_rio_tx_handler(int irq, void *dev_instance)
{
int osr;
struct rio_mport *port = (struct rio_mport *)dev_instance;
+ struct rio_priv *priv = port->priv;
- osr = in_be32((void *)&msg_regs->osr);
+ osr = in_be32(&priv->msg_regs->osr);
- if (osr & RIO_MSG_OSR_TE) {
+ if (unlikely(osr & RIO_MSG_OSR_TE)) {
pr_info("RIO: outbound message transmission error\n");
- out_be32((void *)&msg_regs->osr, RIO_MSG_OSR_TE);
+ out_be32(&priv->msg_regs->osr, RIO_MSG_OSR_TE);
goto out;
}
- if (osr & RIO_MSG_OSR_QOI) {
+ if (unlikely(osr & RIO_MSG_OSR_QOI)) {
pr_info("RIO: outbound message queue overflow\n");
- out_be32((void *)&msg_regs->osr, RIO_MSG_OSR_QOI);
+ out_be32(&priv->msg_regs->osr, RIO_MSG_OSR_QOI);
goto out;
}
if (osr & RIO_MSG_OSR_EOMI) {
- u32 dqp = in_be32((void *)&msg_regs->odqdpar);
- int slot = (dqp - msg_tx_ring.phys) >> 5;
- port->outb_msg[0].mcback(port, msg_tx_ring.dev_id, -1, slot);
+ u32 dqp = in_be32(&priv->msg_regs->odqdpar);
+ int slot = (dqp - priv->msg_tx_ring.phys) >> 5;
+ port->outb_msg[0].mcback(port, priv->msg_tx_ring.dev_id, -1,
slot);
/* Ack the end-of-message interrupt */
- out_be32((void *)&msg_regs->osr, RIO_MSG_OSR_EOMI);
+ out_be32(&priv->msg_regs->osr, RIO_MSG_OSR_EOMI);
}
out:
@@ -385,7 +653,7 @@ mpc85xx_rio_tx_handler(int irq, void *dev_instance)
}
/**
- * rio_open_outb_mbox - Initialize MPC85xx outbound mailbox
+ * rio_open_outb_mbox - Initialize outbound mailbox
* @mport: Master port implementing the outbound message unit
* @dev_id: Device specific pointer to pass on event
* @mbox: Mailbox to open
@@ -398,6 +666,7 @@ mpc85xx_rio_tx_handler(int irq, void *dev_instance)
int rio_open_outb_mbox(struct rio_mport *mport, void *dev_id, int mbox, int
entries)
{
int i, j, rc = 0;
+ struct rio_priv *priv = mport->priv;
if ((entries < RIO_MIN_TX_RING_SIZE) ||
(entries > RIO_MAX_TX_RING_SIZE) || (!is_power_of_2(entries))) {
@@ -406,54 +675,54 @@ int rio_open_outb_mbox(struct rio_mport *mport, void
*dev_id, int mbox, int entr
}
/* Initialize shadow copy ring */
- msg_tx_ring.dev_id = dev_id;
- msg_tx_ring.size = entries;
+ priv->msg_tx_ring.dev_id = dev_id;
+ priv->msg_tx_ring.size = entries;
- for (i = 0; i < msg_tx_ring.size; i++) {
- if (!
- (msg_tx_ring.virt_buffer[i] =
+ for (i = 0; i < priv->msg_tx_ring.size; i++) {
+ priv->msg_tx_ring.virt_buffer[i] =
dma_alloc_coherent(NULL, RIO_MSG_BUFFER_SIZE,
- &msg_tx_ring.phys_buffer[i],
- GFP_KERNEL))) {
+ &priv->msg_tx_ring.phys_buffer[i],
+ GFP_KERNEL);
+ if (!priv->msg_tx_ring.virt_buffer[i]) {
rc = -ENOMEM;
- for (j = 0; j < msg_tx_ring.size; j++)
- if (msg_tx_ring.virt_buffer[j])
+ for (j = 0; j < priv->msg_tx_ring.size; j++)
+ if (priv->msg_tx_ring.virt_buffer[j])
dma_free_coherent(NULL,
RIO_MSG_BUFFER_SIZE,
- msg_tx_ring.
+ priv->msg_tx_ring.
virt_buffer[j],
- msg_tx_ring.
+ priv->msg_tx_ring.
phys_buffer[j]);
goto out;
}
}
/* Initialize outbound message descriptor ring */
- if (!(msg_tx_ring.virt = dma_alloc_coherent(NULL,
- msg_tx_ring.size *
+ priv->msg_tx_ring.virt = dma_alloc_coherent(NULL,
+ priv->msg_tx_ring.size *
RIO_MSG_DESC_SIZE,
- &msg_tx_ring.phys,
- GFP_KERNEL))) {
+ &priv->msg_tx_ring.phys,
+ GFP_KERNEL);
+ if (!priv->msg_tx_ring.virt) {
rc = -ENOMEM;
goto out_dma;
}
- memset(msg_tx_ring.virt, 0, msg_tx_ring.size * RIO_MSG_DESC_SIZE);
- msg_tx_ring.tx_slot = 0;
+ priv->msg_tx_ring.tx_slot = 0;
/* Point dequeue/enqueue pointers at first entry in ring */
- out_be32((void *)&msg_regs->odqdpar, msg_tx_ring.phys);
- out_be32((void *)&msg_regs->odqepar, msg_tx_ring.phys);
+ out_be32(&priv->msg_regs->odqdpar, priv->msg_tx_ring.phys);
+ out_be32(&priv->msg_regs->odqepar, priv->msg_tx_ring.phys);
/* Configure for snooping */
- out_be32((void *)&msg_regs->osar, 0x00000004);
+ out_be32(&priv->msg_regs->osar, 0x00000004);
/* Clear interrupt status */
- out_be32((void *)&msg_regs->osr, 0x000000b3);
+ out_be32(&priv->msg_regs->osr, 0x000000b3);
/* Hook up outbound message handler */
- if ((rc =
- request_irq(MPC85xx_IRQ_RIO_TX, mpc85xx_rio_tx_handler, 0,
- "msg_tx", (void *)mport)) < 0)
+ rc = request_irq(IRQ_RIO_TX(mport), fsl_rio_tx_handler, 0, "msg_tx",
+ mport);
+ if (rc < 0)
goto out_irq;
/*
@@ -463,34 +732,33 @@ int rio_open_outb_mbox(struct rio_mport *mport, void
*dev_id, int mbox, int entr
* Chaining mode
* Disable
*/
- out_be32((void *)&msg_regs->omr, 0x00100220);
+ out_be32(&priv->msg_regs->omr, 0x00100220);
/* Set number of entries */
- out_be32((void *)&msg_regs->omr,
- in_be32((void *)&msg_regs->omr) |
+ setbits32(&priv->msg_regs->omr,
((get_bitmask_order(entries) - 2) << 12));
/* Now enable the unit */
- out_be32((void *)&msg_regs->omr, in_be32((void *)&msg_regs->omr) | 0x1);
+ setbits32(&priv->msg_regs->omr, 0x1);
out:
return rc;
out_irq:
- dma_free_coherent(NULL, msg_tx_ring.size * RIO_MSG_DESC_SIZE,
- msg_tx_ring.virt, msg_tx_ring.phys);
+ dma_free_coherent(NULL, priv->msg_tx_ring.size * RIO_MSG_DESC_SIZE,
+ priv->msg_tx_ring.virt, priv->msg_tx_ring.phys);
out_dma:
- for (i = 0; i < msg_tx_ring.size; i++)
+ for (i = 0; i < priv->msg_tx_ring.size; i++)
dma_free_coherent(NULL, RIO_MSG_BUFFER_SIZE,
- msg_tx_ring.virt_buffer[i],
- msg_tx_ring.phys_buffer[i]);
+ priv->msg_tx_ring.virt_buffer[i],
+ priv->msg_tx_ring.phys_buffer[i]);
return rc;
}
/**
- * rio_close_outb_mbox - Shut down MPC85xx outbound mailbox
+ * rio_close_outb_mbox - Shut down outbound mailbox
* @mport: Master port implementing the outbound message unit
* @mbox: Mailbox to close
*
@@ -499,36 +767,37 @@ int rio_open_outb_mbox(struct rio_mport *mport, void
*dev_id, int mbox, int entr
*/
void rio_close_outb_mbox(struct rio_mport *mport, int mbox)
{
+ struct rio_priv *priv = mport->priv;
/* Disable inbound message unit */
- out_be32((void *)&msg_regs->omr, 0);
+ out_be32(&priv->msg_regs->omr, 0);
/* Free ring */
- dma_free_coherent(NULL, msg_tx_ring.size * RIO_MSG_DESC_SIZE,
- msg_tx_ring.virt, msg_tx_ring.phys);
+ dma_free_coherent(NULL, priv->msg_tx_ring.size * RIO_MSG_DESC_SIZE,
+ priv->msg_tx_ring.virt, priv->msg_tx_ring.phys);
/* Free interrupt */
- free_irq(MPC85xx_IRQ_RIO_TX, (void *)mport);
+ free_irq(IRQ_RIO_TX(mport), mport);
}
/**
- * mpc85xx_rio_rx_handler - MPC85xx inbound message interrupt handler
+ * fsl_rio_rx_handler - inbound message interrupt handler
* @irq: Linux interrupt number
* @dev_instance: Pointer to interrupt-specific data
*
* Handles inbound message interrupts. Executes a registered inbound
- * mailbox event handler and acks the interrupt occurrence.
+ * mailbox event handler and acks the interrupt occurence.
*/
-static irqreturn_t
-mpc85xx_rio_rx_handler(int irq, void *dev_instance)
+static irqreturn_t fsl_rio_rx_handler(int irq, void *dev_instance)
{
int isr;
struct rio_mport *port = (struct rio_mport *)dev_instance;
+ struct rio_priv *priv = port->priv;
- isr = in_be32((void *)&msg_regs->isr);
+ isr = in_be32(&priv->msg_regs->isr);
- if (isr & RIO_MSG_ISR_TE) {
+ if (unlikely(isr & RIO_MSG_ISR_TE)) {
pr_info("RIO: inbound message reception error\n");
- out_be32((void *)&msg_regs->isr, RIO_MSG_ISR_TE);
+ out_be32(&priv->msg_regs->isr, RIO_MSG_ISR_TE);
goto out;
}
@@ -540,10 +809,10 @@ mpc85xx_rio_rx_handler(int irq, void *dev_instance)
* make the callback with an unknown/invalid mailbox number
* argument.
*/
- port->inb_msg[0].mcback(port, msg_rx_ring.dev_id, -1, -1);
+ port->inb_msg[0].mcback(port, priv->msg_rx_ring.dev_id, -1, -1);
/* Ack the queueing interrupt */
- out_be32((void *)&msg_regs->isr, RIO_MSG_ISR_DIQI);
+ out_be32(&priv->msg_regs->isr, RIO_MSG_ISR_DIQI);
}
out:
@@ -551,7 +820,7 @@ mpc85xx_rio_rx_handler(int irq, void *dev_instance)
}
/**
- * rio_open_inb_mbox - Initialize MPC85xx inbound mailbox
+ * rio_open_inb_mbox - Initialize inbound mailbox
* @mport: Master port implementing the inbound message unit
* @dev_id: Device specific pointer to pass on event
* @mbox: Mailbox to open
@@ -564,6 +833,7 @@ mpc85xx_rio_rx_handler(int irq, void *dev_instance)
int rio_open_inb_mbox(struct rio_mport *mport, void *dev_id, int mbox, int
entries)
{
int i, rc = 0;
+ struct rio_priv *priv = mport->priv;
if ((entries < RIO_MIN_RX_RING_SIZE) ||
(entries > RIO_MAX_RX_RING_SIZE) || (!is_power_of_2(entries))) {
@@ -572,36 +842,37 @@ int rio_open_inb_mbox(struct rio_mport *mport, void
*dev_id, int mbox, int entri
}
/* Initialize client buffer ring */
- msg_rx_ring.dev_id = dev_id;
- msg_rx_ring.size = entries;
- msg_rx_ring.rx_slot = 0;
- for (i = 0; i < msg_rx_ring.size; i++)
- msg_rx_ring.virt_buffer[i] = NULL;
+ priv->msg_rx_ring.dev_id = dev_id;
+ priv->msg_rx_ring.size = entries;
+ priv->msg_rx_ring.rx_slot = 0;
+ for (i = 0; i < priv->msg_rx_ring.size; i++)
+ priv->msg_rx_ring.virt_buffer[i] = NULL;
/* Initialize inbound message ring */
- if (!(msg_rx_ring.virt = dma_alloc_coherent(NULL,
- msg_rx_ring.size *
+ priv->msg_rx_ring.virt = dma_alloc_coherent(NULL,
+ priv->msg_rx_ring.size *
RIO_MAX_MSG_SIZE,
- &msg_rx_ring.phys,
- GFP_KERNEL))) {
+ &priv->msg_rx_ring.phys,
+ GFP_KERNEL);
+ if (!priv->msg_rx_ring.virt) {
rc = -ENOMEM;
goto out;
}
/* Point dequeue/enqueue pointers at first entry in ring */
- out_be32((void *)&msg_regs->ifqdpar, (u32) msg_rx_ring.phys);
- out_be32((void *)&msg_regs->ifqepar, (u32) msg_rx_ring.phys);
+ out_be32(&priv->msg_regs->ifqdpar, (u32) priv->msg_rx_ring.phys);
+ out_be32(&priv->msg_regs->ifqepar, (u32) priv->msg_rx_ring.phys);
/* Clear interrupt status */
- out_be32((void *)&msg_regs->isr, 0x00000091);
+ out_be32(&priv->msg_regs->isr, 0x00000091);
/* Hook up inbound message handler */
- if ((rc =
- request_irq(MPC85xx_IRQ_RIO_RX, mpc85xx_rio_rx_handler, 0,
- "msg_rx", (void *)mport)) < 0) {
+ rc = request_irq(IRQ_RIO_RX(mport), fsl_rio_rx_handler, 0,
+ "msg_rx", mport);
+ if (rc < 0) {
dma_free_coherent(NULL, RIO_MSG_BUFFER_SIZE,
- msg_tx_ring.virt_buffer[i],
- msg_tx_ring.phys_buffer[i]);
+ priv->msg_tx_ring.virt_buffer[i],
+ priv->msg_tx_ring.phys_buffer[i]);
goto out;
}
@@ -612,22 +883,21 @@ int rio_open_inb_mbox(struct rio_mport *mport, void
*dev_id, int mbox, int entri
* Unmask all interrupt sources
* Disable
*/
- out_be32((void *)&msg_regs->imr, 0x001b0060);
+ out_be32(&priv->msg_regs->imr, 0x001b0060);
/* Set number of queue entries */
- out_be32((void *)&msg_regs->imr,
- in_be32((void *)&msg_regs->imr) |
- ((get_bitmask_order(entries) - 2) << 12));
+ setbits32(&priv->msg_regs->imr,
+ ((get_bitmask_order(entries) - 2) << 12));
/* Now enable the unit */
- out_be32((void *)&msg_regs->imr, in_be32((void *)&msg_regs->imr) | 0x1);
+ setbits32(&priv->msg_regs->imr, 0x1);
out:
return rc;
}
/**
- * rio_close_inb_mbox - Shut down MPC85xx inbound mailbox
+ * rio_close_inb_mbox - Shut down inbound mailbox
* @mport: Master port implementing the inbound message unit
* @mbox: Mailbox to close
*
@@ -636,44 +906,45 @@ int rio_open_inb_mbox(struct rio_mport *mport, void
*dev_id, int mbox, int entri
*/
void rio_close_inb_mbox(struct rio_mport *mport, int mbox)
{
+ struct rio_priv *priv = mport->priv;
/* Disable inbound message unit */
- out_be32((void *)&msg_regs->imr, 0);
+ out_be32(&priv->msg_regs->imr, 0);
/* Free ring */
- dma_free_coherent(NULL, msg_rx_ring.size * RIO_MAX_MSG_SIZE,
- msg_rx_ring.virt, msg_rx_ring.phys);
+ dma_free_coherent(NULL, priv->msg_rx_ring.size * RIO_MAX_MSG_SIZE,
+ priv->msg_rx_ring.virt, priv->msg_rx_ring.phys);
/* Free interrupt */
- free_irq(MPC85xx_IRQ_RIO_RX, (void *)mport);
+ free_irq(IRQ_RIO_RX(mport), mport);
}
/**
- * rio_hw_add_inb_buffer - Add buffer to the MPC85xx inbound message queue
+ * rio_hw_add_inb_buffer - Add buffer to the inbound message queue
* @mport: Master port implementing the inbound message unit
* @mbox: Inbound mailbox number
* @buf: Buffer to add to inbound queue
*
- * Adds the @buf buffer to the MPC85xx inbound message queue. Returns
+ * Adds the @buf buffer to the inbound message queue. Returns
* %0 on success or %-EINVAL on failure.
*/
int rio_hw_add_inb_buffer(struct rio_mport *mport, int mbox, void *buf)
{
int rc = 0;
+ struct rio_priv *priv = mport->priv;
pr_debug("RIO: rio_hw_add_inb_buffer(), msg_rx_ring.rx_slot %d\n",
- msg_rx_ring.rx_slot);
+ priv->msg_rx_ring.rx_slot);
- if (msg_rx_ring.virt_buffer[msg_rx_ring.rx_slot]) {
- printk(KERN_ERR
- "RIO: error adding inbound buffer %d, buffer exists\n",
- msg_rx_ring.rx_slot);
+ if (unlikely(priv->msg_rx_ring.virt_buffer[priv->msg_rx_ring.rx_slot]))
{
+ ERR("error adding inbound buffer %d, buffer exists\n",
+ priv->msg_rx_ring.rx_slot);
rc = -EINVAL;
goto out;
}
- msg_rx_ring.virt_buffer[msg_rx_ring.rx_slot] = buf;
- if (++msg_rx_ring.rx_slot == msg_rx_ring.size)
- msg_rx_ring.rx_slot = 0;
+ priv->msg_rx_ring.virt_buffer[priv->msg_rx_ring.rx_slot] = buf;
+ if (++priv->msg_rx_ring.rx_slot == priv->msg_rx_ring.size)
+ priv->msg_rx_ring.rx_slot = 0;
out:
return rc;
@@ -682,7 +953,7 @@ int rio_hw_add_inb_buffer(struct rio_mport *mport, int
mbox, void *buf)
EXPORT_SYMBOL_GPL(rio_hw_add_inb_buffer);
/**
- * rio_hw_get_inb_message - Fetch inbound message from the MPC85xx message unit
+ * rio_hw_get_inb_message - Fetch inbound message from the message unit
* @mport: Master port implementing the inbound message unit
* @mbox: Inbound mailbox number
*
@@ -691,36 +962,35 @@ EXPORT_SYMBOL_GPL(rio_hw_add_inb_buffer);
*/
void *rio_hw_get_inb_message(struct rio_mport *mport, int mbox)
{
- u32 imr;
- u32 phys_buf, virt_buf;
+ u32 phys_buf;
+ void *virt_buf = NULL;
void *buf = NULL;
int buf_idx;
+ struct rio_priv *priv = mport->priv;
- phys_buf = in_be32((void *)&msg_regs->ifqdpar);
+ phys_buf = in_be32(&priv->msg_regs->ifqdpar);
/* If no more messages, then bail out */
- if (phys_buf == in_be32((void *)&msg_regs->ifqepar))
+ if (phys_buf == in_be32(&priv->msg_regs->ifqepar))
goto out2;
- virt_buf = (u32) msg_rx_ring.virt + (phys_buf - msg_rx_ring.phys);
- buf_idx = (phys_buf - msg_rx_ring.phys) / RIO_MAX_MSG_SIZE;
- buf = msg_rx_ring.virt_buffer[buf_idx];
+ virt_buf = priv->msg_rx_ring.virt + (phys_buf - priv->msg_rx_ring.phys);
+ buf_idx = (phys_buf - priv->msg_rx_ring.phys) / RIO_MAX_MSG_SIZE;
+ buf = priv->msg_rx_ring.virt_buffer[buf_idx];
- if (!buf) {
- printk(KERN_ERR
- "RIO: inbound message copy failed, no buffers\n");
+ if (unlikely(!buf)) {
+ ERR("inbound message copy failed, no buffers\n");
goto out1;
}
/* Copy max message size, caller is expected to allocate that big */
- memcpy(buf, (void *)virt_buf, RIO_MAX_MSG_SIZE);
+ memcpy(buf, virt_buf, RIO_MAX_MSG_SIZE);
/* Clear the available buffer */
- msg_rx_ring.virt_buffer[buf_idx] = NULL;
+ priv->msg_rx_ring.virt_buffer[buf_idx] = NULL;
out1:
- imr = in_be32((void *)&msg_regs->imr);
- out_be32((void *)&msg_regs->imr, imr | RIO_MSG_IMR_MI);
+ setbits32(&priv->msg_regs->imr, RIO_MSG_IMR_MI);
out2:
return buf;
@@ -729,45 +999,44 @@ void *rio_hw_get_inb_message(struct rio_mport *mport, int
mbox)
EXPORT_SYMBOL_GPL(rio_hw_get_inb_message);
/**
- * mpc85xx_rio_dbell_handler - MPC85xx doorbell interrupt handler
+ * fsl_rio_dbell_handler - doorbell interrupt handler
* @irq: Linux interrupt number
* @dev_instance: Pointer to interrupt-specific data
*
* Handles doorbell interrupts. Parses a list of registered
* doorbell event handlers and executes a matching event handler.
*/
-static irqreturn_t
-mpc85xx_rio_dbell_handler(int irq, void *dev_instance)
+static irqreturn_t fsl_rio_dbell_handler(int irq, void *dev_instance)
{
int dsr;
struct rio_mport *port = (struct rio_mport *)dev_instance;
+ struct rio_priv *priv = port->priv;
- dsr = in_be32((void *)&msg_regs->dsr);
+ dsr = in_be32(&priv->msg_regs->dsr);
if (dsr & DOORBELL_DSR_TE) {
pr_info("RIO: doorbell reception error\n");
- out_be32((void *)&msg_regs->dsr, DOORBELL_DSR_TE);
+ out_be32(&priv->msg_regs->dsr, DOORBELL_DSR_TE);
goto out;
}
if (dsr & DOORBELL_DSR_QFI) {
pr_info("RIO: doorbell queue full\n");
- out_be32((void *)&msg_regs->dsr, DOORBELL_DSR_QFI);
+ out_be32(&priv->msg_regs->dsr, DOORBELL_DSR_QFI);
goto out;
}
/* XXX Need to check/dispatch until queue empty */
if (dsr & DOORBELL_DSR_DIQI) {
u32 dmsg =
- (u32) dbell_ring.virt +
- (in_be32((void *)&msg_regs->dqdpar) & 0xfff);
- u32 dmr;
+ (u32) priv->dbell_ring.virt +
+ (in_be32(&priv->msg_regs->dqdpar) & 0xfff);
struct rio_dbell *dbell;
int found = 0;
- pr_debug
- ("RIO: processing doorbell, sid %2.2x tid %2.2x info
%4.4x\n",
- DBELL_SID(dmsg), DBELL_TID(dmsg), DBELL_INF(dmsg));
+ pr_debug("RIO: processing doorbell, sid 0x%02x tid 0x%02x "
+ "info 0x%04x\n", DBELL_SID(dmsg),
+ DBELL_TID(dmsg), DBELL_INF(dmsg));
list_for_each_entry(dbell, &port->dbells, node) {
if ((dbell->res->start <= DBELL_INF(dmsg)) &&
@@ -780,13 +1049,13 @@ mpc85xx_rio_dbell_handler(int irq, void *dev_instance)
dbell->dinb(port, dbell->dev_id, DBELL_SID(dmsg),
DBELL_TID(dmsg),
DBELL_INF(dmsg));
} else {
- pr_debug
- ("RIO: spurious doorbell, sid %2.2x tid %2.2x info
%4.4x\n",
- DBELL_SID(dmsg), DBELL_TID(dmsg), DBELL_INF(dmsg));
+ pr_debug("RIO: spurious doorbell, sid 0x%02x "
+ "tid 0x%02x info %4.4x\n",
+ DBELL_SID(dmsg), DBELL_TID(dmsg),
+ DBELL_INF(dmsg));
}
- dmr = in_be32((void *)&msg_regs->dmr);
- out_be32((void *)&msg_regs->dmr, dmr | DOORBELL_DMR_DI);
- out_be32((void *)&msg_regs->dsr, DOORBELL_DSR_DIQI);
+ setbits32(&priv->msg_regs->dmr, DOORBELL_DMR_DI);
+ out_be32(&priv->msg_regs->dsr, DOORBELL_DSR_DIQI);
}
out:
@@ -794,67 +1063,76 @@ mpc85xx_rio_dbell_handler(int irq, void *dev_instance)
}
/**
- * mpc85xx_rio_doorbell_init - MPC85xx doorbell interface init
+ * fsl_rio_doorbell_init - doorbell interface init
* @mport: Master port implementing the inbound doorbell unit
*
* Initializes doorbell unit hardware and inbound DMA buffer
- * ring. Called from mpc85xx_rio_setup(). Returns %0 on success
+ * ring. Called from fsl_rio_setup(). Returns %0 on success
* or %-ENOMEM on failure.
*/
-static int mpc85xx_rio_doorbell_init(struct rio_mport *mport)
+static int fsl_rio_doorbell_init(struct rio_mport *mport, phys_addr_t dbaddr)
{
int rc = 0;
+ struct rio_priv *priv = mport->priv;
/* Map outbound doorbell window immediately after maintenance window */
- if (!(dbell_win =
- (u32) ioremap(mport->iores.start + RIO_MAINT_WIN_SIZE,
- RIO_DBELL_WIN_SIZE))) {
- printk(KERN_ERR
- "RIO: unable to map outbound doorbell window\n");
+ priv->dbell_win = ioremap(dbaddr, RIO_DBELL_WIN_SIZE);
+ if (!priv->dbell_win) {
+ ERR("unable to map outbound doorbell window\n");
rc = -ENOMEM;
goto out;
}
/* Initialize inbound doorbells */
- if (!(dbell_ring.virt = dma_alloc_coherent(NULL,
+ priv->dbell_ring.virt = dma_alloc_coherent(NULL,
512 * DOORBELL_MESSAGE_SIZE,
- &dbell_ring.phys,
- GFP_KERNEL))) {
- printk(KERN_ERR "RIO: unable allocate inbound doorbell ring\n");
+ &priv->dbell_ring.phys,
+ GFP_KERNEL);
+ if (!priv->dbell_ring.virt) {
+ ERR("unable allocate inbound doorbell ring\n");
rc = -ENOMEM;
- iounmap((void *)dbell_win);
+ iounmap(priv->dbell_win);
goto out;
}
/* Point dequeue/enqueue pointers at first entry in ring */
- out_be32((void *)&msg_regs->dqdpar, (u32) dbell_ring.phys);
- out_be32((void *)&msg_regs->dqepar, (u32) dbell_ring.phys);
+ out_be32(&priv->msg_regs->dqdpar, (u32) priv->dbell_ring.phys);
+ out_be32(&priv->msg_regs->dqepar, (u32) priv->dbell_ring.phys);
/* Clear interrupt status */
- out_be32((void *)&msg_regs->dsr, 0x00000091);
+ out_be32(&priv->msg_regs->dsr, 0x00000091);
/* Hook up doorbell handler */
- if ((rc =
- request_irq(MPC85xx_IRQ_RIO_BELL, mpc85xx_rio_dbell_handler, 0,
- "dbell_rx", (void *)mport) < 0)) {
- iounmap((void *)dbell_win);
+ rc = request_irq(IRQ_RIO_BELL(mport), fsl_rio_dbell_handler, 0,
+ "dbell_rx", mport);
+ if (rc < 0) {
+ iounmap(priv->dbell_win);
dma_free_coherent(NULL, 512 * DOORBELL_MESSAGE_SIZE,
- dbell_ring.virt, dbell_ring.phys);
- printk(KERN_ERR
- "MPC85xx RIO: unable to request inbound doorbell irq");
+ priv->dbell_ring.virt, priv->dbell_ring.phys);
+ ERR("unable to request inbound doorbell irq");
goto out;
}
/* Configure doorbells for snooping, 512 entries, and enable */
- out_be32((void *)&msg_regs->dmr, 0x00108161);
+ out_be32(&priv->msg_regs->dmr, 0x00108161);
out:
return rc;
}
+u32 rio_get_mport_id(struct rio_mport *mport)
+{
+ u32 mport_id = 0;
+
+ rio_local_read_config_32(mport, 0x60, &mport_id);
+ mport_id = mport->sys_size ? (mport_id & 0xffff) : ((mport_id >> 16) &
0xff);
+ return mport_id;
+
+}
+
static char *cmdline = NULL;
-static int mpc85xx_rio_get_hdid(int index)
+static int fsl_rio_get_hdid(int index)
{
/* XXX Need to parse multiple entries in some format */
if (!cmdline)
@@ -863,7 +1141,7 @@ static int mpc85xx_rio_get_hdid(int index)
return simple_strtol(cmdline, NULL, 0);
}
-static int mpc85xx_rio_get_cmdline(char *s)
+static int fsl_rio_get_cmdline(char *s)
{
if (!s)
return 0;
@@ -872,61 +1150,345 @@ static int mpc85xx_rio_get_cmdline(char *s)
return 1;
}
-__setup("riohdid=", mpc85xx_rio_get_cmdline);
+__setup("riohdid=", fsl_rio_get_cmdline);
+
+static struct rio_mem_ops fsl_mem_ops = {
+ .map_inb = fsl_rio_map_inb_mem,
+ .map_outb = fsl_rio_map_outb_mem,
+ .unmap_inb = fsl_rio_unmap_inb_mem,
+ .unmap_outb = fsl_rio_unmap_outb_mem,
+};
+
+static inline void fsl_rio_info(u32 ccsr)
+{
+ if (ccsr & 1) {
+ /* Serial phy */
+ INFO("Hardware port width: ");
+ switch (ccsr >> 30) {
+ case 0:
+ printk("1\n");
+ break;
+ case 1:
+ printk("4\n");
+ break;
+ default:
+ printk("Unknown\n");
+ break;;
+ }
+
+ INFO("Training connection status: ");
+ switch ((ccsr >> 27) & 7) {
+ case 0:
+ printk("Single-lane 0\n");
+ break;
+ case 1:
+ printk("Single-lane 2\n");
+ break;
+ case 2:
+ printk("Four-lane\n");
+ break;
+ default:
+ printk("Unknown\n");
+ }
+ } else {
+ /* Parallel phy */
+ if (ccsr & 0x80000000)
+ INFO("Output port operating in 8-bit mode\n");
+ if (ccsr & 0x08000000)
+ INFO("Input port operating in 8-bit mode\n");
+ }
+
+}
+
+static inline u8 hw_port_width(u32 ccsr)
+{
+ u8 pw = ccsr >> 30;
+ switch (pw) {
+ case 0:
+ return 1;
+ case 1:
+ return 4;
+ default:
+ return 0;
+ }
+}
+
+static int of_cells_get(struct device_node *np, const char *str)
+{
+ struct device_node *tmp = NULL;
+ const int *var = NULL;
+
+ var = of_get_property(np, str, NULL);
+ tmp = of_get_parent(np);
+
+ while (!var && tmp) {
+ var = (int *)of_get_property(tmp, str, NULL);
+ of_node_put(tmp);
+ tmp = of_get_parent(np);
+ }
+
+ return (var ? *var : 0);
+}
/**
- * mpc85xx_rio_setup - Setup MPC85xx RapidIO interface
- * @law_start: Starting physical address of RapidIO LAW
- * @law_size: Size of RapidIO LAW
+ * fsl_rio_setup - Setup Freescale PowerPC RapidIO interface
*
- * Initializes MPC85xx RapidIO hardware interface, configures
+ * Initializes Freescale PowerPC RapidIO hardware interface, configures
* master port with system-specific info, and registers the
* master port with the RapidIO subsystem.
*/
-void mpc85xx_rio_setup(int law_start, int law_size)
+int fsl_rio_setup(struct of_device *dev)
{
- struct rio_ops *ops;
- struct rio_mport *port;
+ struct rio_ops *ops = NULL;
+ struct rio_mport *port = NULL;
+ const u32 *dt_range;
+ int rlen = 0;
+ resource_size_t law_start = 0, law_size = 0;
+ struct resource regs;
+ int rc;
+ enum rio_phy_type phy_type;
+ volatile void __iomem *regs_win = NULL;
+ struct rio_priv *priv = NULL;
+ u32 ccsr;
+ int paw, aw, psw;
+ struct device_node *pa;
+
+ if (!dev->node) {
+ ERR("Dev ofnode is NULL\n");
+ return -EFAULT;
+ }
+
+ dt_range = of_get_property(dev->node, "ranges", &rlen);
+ if (!dt_range) {
+ ERR("Can't get %s property 'ranges'\n", dev->node->full_name);
+ return -EFAULT;
+ }
+
+ aw = of_cells_get(dev->node, "#address-cells");
+ pa = of_get_parent(dev->node);
+ paw = of_cells_get(pa, "#address-cells");
+ psw = of_cells_get(pa, "#size-cells");
+ of_node_put(pa);
- ops = kmalloc(sizeof(struct rio_ops), GFP_KERNEL);
- ops->lcread = mpc85xx_local_config_read;
- ops->lcwrite = mpc85xx_local_config_write;
- ops->cread = mpc85xx_rio_config_read;
- ops->cwrite = mpc85xx_rio_config_write;
- ops->dsend = mpc85xx_rio_doorbell_send;
+ law_start = of_read_number(dt_range + aw, paw);
+ law_size = of_read_number(dt_range + aw + paw, psw);
- port = kmalloc(sizeof(struct rio_mport), GFP_KERNEL);
+ rc = of_address_to_resource(dev->node, 0, ®s);
+ if (rc) {
+ ERR("Can't get %s property 'reg'\n", dev->node->full_name);
+ return -EFAULT;
+ }
+ INFO("Of-device full name %s\n", dev->node->full_name);
+ INFO("LAW start 0x%016llx, size 0x%016llx.\n", (u64)law_start,
+ (u64)law_size);
+ INFO("Regs start 0x%08x size 0x%08x\n", regs.start,
+ regs.end - regs.start + 1);
+
+ regs_win = ioremap(regs.start, regs.end - regs.start + 1);
+ if (!regs_win) {
+ ERR("Can't remap io for 'regs_win'\n");
+ rc = -ENOMEM;
+ goto err;
+ }
+
+ /* Probe the RapidIO phy type */
+ ccsr = in_be32(regs_win + RIO_CCSR);
+ if (ccsr & 1)
+ phy_type = RIO_PHY_SERIAL;
+ else
+ phy_type = RIO_PHY_PARALLEL;
+ INFO("Phy type: ");
+ switch (phy_type) {
+ case RIO_PHY_SERIAL:
+ printk("serial\n");
+ break;
+ case RIO_PHY_PARALLEL:
+ printk("parallel");
+ break;
+ default:
+ printk("Unknown type %d\n", phy_type);
+ rc = -EINVAL;
+ goto err;
+ };
+ fsl_rio_info(ccsr);
+
+
+ /* Checking the port training status */
+ if (in_be32((regs_win + RIO_ESCSR)) & 1) {
+ ERR("Port is not ready. Try to restart connection...\n");
+ switch (phy_type) {
+ case RIO_PHY_SERIAL:
+ /* Disable ports */
+ out_be32(regs_win + RIO_CCSR, 0);
+ /* Set 1x lane */
+ setbits32(regs_win + RIO_CCSR, 0x02000000);
+ /* Enable ports */
+ setbits32(regs_win + RIO_CCSR, 0x00600000);
+ break;
+ case RIO_PHY_PARALLEL:
+ /* Disable ports */
+ out_be32(regs_win + RIO_CCSR, 0x22000000);
+ /* Enable ports */
+ out_be32(regs_win + RIO_CCSR, 0x44000000);
+ break;
+ }
+ if (in_be32((regs_win + RIO_ESCSR)) & 1) {
+ ERR("Port restart failed.\n");
+ rc = -ENOLINK;
+ goto err;
+ }
+ INFO("Port restart success!\n");
+ ccsr = in_be32(regs_win + RIO_CCSR);
+ fsl_rio_info(ccsr);
+ }
+
+ ops = kzalloc(sizeof(struct rio_ops), GFP_KERNEL);
+ ops->lcread = fsl_local_config_read;
+ ops->lcwrite = fsl_local_config_write;
+ ops->cread = fsl_rio_config_read;
+ ops->cwrite = fsl_rio_config_write;
+ ops->dsend = fsl_rio_doorbell_send;
+
+ port = kzalloc(sizeof(struct rio_mport), GFP_KERNEL);
+ if (!port) {
+ ERR("Can't alloc memory for 'port'\n");
+ rc = -ENOMEM;
+ goto err;
+ }
port->id = 0;
port->index = 0;
+
+ port->sys_size = (in_be32((regs_win + RIO_PEF_CAR))
+ & RIO_PEF_CTLS) >> 4;
+ INFO("RapidIO Common Transport System size: %d\n",
+ port->sys_size ? 65536 : 256);
+
+ port->phy_type = phy_type;
+
+ priv = kzalloc(sizeof(struct rio_priv), GFP_KERNEL);
+ if (!priv) {
+ ERR("Can't alloc memory for 'priv'\n");
+ rc = -ENOMEM;
+ goto err;
+ }
+ port->priv = priv;
+ priv->regs_win = regs_win;
INIT_LIST_HEAD(&port->dbells);
port->iores.start = law_start;
port->iores.end = law_start + law_size;
port->iores.flags = IORESOURCE_MEM;
+ port->iores.name = "rio_io_win";
+
+ priv->bellirq = irq_of_parse_and_map(dev->node, 2);
+ priv->txirq = irq_of_parse_and_map(dev->node, 3);
+ priv->rxirq = irq_of_parse_and_map(dev->node, 4);
+ INFO("bellirq: %d, txirq: %d, rxirq %d\n", priv->bellirq,
+ priv->txirq, priv->rxirq);
rio_init_dbell_res(&port->riores[RIO_DOORBELL_RESOURCE], 0, 0xffff);
rio_init_mbox_res(&port->riores[RIO_INB_MBOX_RESOURCE], 0, 0);
rio_init_mbox_res(&port->riores[RIO_OUTB_MBOX_RESOURCE], 0, 0);
+
strcpy(port->name, "RIO0 mport");
port->ops = ops;
- port->host_deviceid = mpc85xx_rio_get_hdid(port->id);
+ port->mops = &fsl_mem_ops;
+ port->host_deviceid = fsl_rio_get_hdid(port->id);
rio_register_mport(port);
- regs_win = (u32) ioremap(RIO_REGS_BASE, 0x20000);
- atmu_regs = (struct rio_atmu_regs *)(regs_win + RIO_ATMU_REGS_OFFSET);
- maint_atmu_regs = atmu_regs + 1;
- dbell_atmu_regs = atmu_regs + 2;
- msg_regs = (struct rio_msg_regs *)(regs_win + RIO_MSG_REGS_OFFSET);
+ priv->atmu_regs = (struct rio_atmu_regs *)(regs_win +
+ RIO_ATMU_REGS_OFFSET);
+ priv->maint_atmu_regs = priv->atmu_regs + 1;
+ priv->dbell_atmu_regs = priv->atmu_regs + 2;
+ priv->msg_regs = (struct rio_msg_regs *)(regs_win +
+ ((port->phy_type == RIO_PHY_SERIAL)
+ ? RIO_S_MSG_REGS_OFFSET
+ : RIO_P_MSG_REGS_OFFSET));
+
+ /* Set to receive any dist ID for serial RapidIO controller. */
+ if (port->phy_type == RIO_PHY_SERIAL)
+ out_be32((regs_win + RIO_ISR_AACR), RIO_ISR_AACR_AA);
/* Configure maintenance transaction window */
- out_be32((void *)&maint_atmu_regs->rowbar, 0x000c0000);
- out_be32((void *)&maint_atmu_regs->rowar, 0x80077015);
+ if (!rio_request_io_region(port, NULL, law_start, RIO_MAINT_WIN_SIZE,
+ "maint_win", RIO_RESOURCE_MAINT, NULL)) {
+ rc = -EPERM;
+ ERR("request maint win error!\n");
+ goto err;
+ }
+ out_be32(&priv->maint_atmu_regs->rowbar,
+ (law_start >> 12) & 0xffffff);
+ out_be32(&priv->maint_atmu_regs->rowar, 0x80077000
+ | (__ilog2(RIO_MAINT_WIN_SIZE) - 1));
- maint_win = (u32) ioremap(law_start, RIO_MAINT_WIN_SIZE);
+ priv->maint_win = ioremap(law_start, RIO_MAINT_WIN_SIZE);
/* Configure outbound doorbell window */
- out_be32((void *)&dbell_atmu_regs->rowbar, 0x000c0400);
- out_be32((void *)&dbell_atmu_regs->rowar, 0x8004200b);
- mpc85xx_rio_doorbell_init(port);
+ if (!rio_request_io_region(port, NULL, law_start + RIO_MAINT_WIN_SIZE,
+ RIO_DBELL_WIN_SIZE,
+ "dbell_win", RIO_RESOURCE_DOORBELL, NULL)) {
+ rc = -EPERM;
+ ERR("request doorbell win error!\n");
+ goto err;
+ }
+ out_be32(&priv->dbell_atmu_regs->rowbar, ((law_start +
+ RIO_MAINT_WIN_SIZE) >> 12) & 0xfffff);
+ out_be32(&priv->dbell_atmu_regs->rowar, 0x80042000
+ | (__ilog2(RIO_DBELL_WIN_SIZE) - 1));
+ rc = fsl_rio_doorbell_init(port, law_start + RIO_MAINT_WIN_SIZE);
+ if (rc)
+ goto err;
+
+ return 0;
+
+err:
+ if (regs_win)
+ iounmap(regs_win);
+ if (ops)
+ kfree(ops);
+ if (port)
+ kfree(port);
+ if (priv)
+ kfree(priv);
+ return rc;
+}
+
+/* The probe function for RapidIO peer-to-peer network.
+ */
+static int __devinit fsl_of_rio_rpn_probe(struct of_device *dev,
+ const struct of_device_id *match)
+{
+ int rc;
+ printk(KERN_INFO "Setting up RapidIO peer-to-peer network %s\n",
+ dev->node->full_name);
+
+ rc = fsl_rio_setup(dev);
+ if (rc)
+ goto out;
+
+ /* Enumerate all registered ports */
+ rc = rio_init_mports();
+out:
+ return rc;
+};
+
+static struct of_device_id fsl_of_rio_rpn_ids[] = {
+ {
+ .compatible = "fsl,rapidio-delta",
+ },
+ {},
+};
+
+static struct of_platform_driver fsl_of_rio_rpn_driver = {
+ .name = "fsl-of-rio",
+ .match_table = fsl_of_rio_rpn_ids,
+ .probe = fsl_of_rio_rpn_probe,
+};
+
+static __init int fsl_of_rio_rpn_init(void)
+{
+ return of_register_platform_driver(&fsl_of_rio_rpn_driver);
}
+
+subsys_initcall(fsl_of_rio_rpn_init);
--
1.5.2
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
