From: Mario Limonciello <mario.limoncie...@dell.com>
[ Upstream commit 3cf31b1a9effd859bb3d6ff9f8b5b0d5e6cac952 ]
Per guidance from Intel ethernet architecture team, it may take
up to 1 second for unconfiguring ULP mode.
However in practice this seems to be taking up to 2 seconds on
some Lenovo machines. Detect scenarios that take more than 1 second
but less than 2.5 seconds and emit a warning on resume for those
scenarios.
Suggested-by: Aaron Ma <aaron...@canonical.com>
Suggested-by: Sasha Netfin <sasha.nef...@intel.com>
Suggested-by: Hans de Goede <hdego...@redhat.com>
CC: Mark Pearson <markpear...@lenovo.com>
Fixes: f15bb6dde738cc8fa0 ("e1000e: Add support for S0ix")
BugLink: https://bugs.launchpad.net/bugs/1865570
Link:
https://patchwork.ozlabs.org/project/intel-wired-lan/patch/20200323191639.48826-1-aaron...@canonical.com/
Link: https://lkml.org/lkml/2020/12/13/15
Link: https://lkml.org/lkml/2020/12/14/708
Signed-off-by: Mario Limonciello <mario.limoncie...@dell.com>
Reviewed-by: Hans de Goede <hdego...@redhat.com>
Tested-by: Yijun Shen <yijun.s...@dell.com>
Signed-off-by: Tony Nguyen <anthony.l.ngu...@intel.com>
Signed-off-by: Greg Kroah-Hartman <gre...@linuxfoundation.org>
---
drivers/net/ethernet/intel/e1000e/ich8lan.c | 17 ++++++++++++++---
1 file changed, 14 insertions(+), 3 deletions(-)
--- a/drivers/net/ethernet/intel/e1000e/ich8lan.c
+++ b/drivers/net/ethernet/intel/e1000e/ich8lan.c
@@ -1240,6 +1240,9 @@ static s32 e1000_disable_ulp_lpt_lp(stru
return 0;
if (er32(FWSM) & E1000_ICH_FWSM_FW_VALID) {
+ struct e1000_adapter *adapter = hw->adapter;
+ bool firmware_bug = false;
+
if (force) {
/* Request ME un-configure ULP mode in the PHY */
mac_reg = er32(H2ME);
@@ -1248,16 +1251,24 @@ static s32 e1000_disable_ulp_lpt_lp(stru
ew32(H2ME, mac_reg);
}
- /* Poll up to 300msec for ME to clear ULP_CFG_DONE. */
+ /* Poll up to 2.5 seconds for ME to clear ULP_CFG_DONE.
+ * If this takes more than 1 second, show a warning indicating a
+ * firmware bug
+ */
while (er32(FWSM) & E1000_FWSM_ULP_CFG_DONE) {
- if (i++ == 30) {
+ if (i++ == 250) {
ret_val = -E1000_ERR_PHY;
goto out;
}
+ if (i > 100 && !firmware_bug)
+ firmware_bug = true;
usleep_range(10000, 11000);
}
- e_dbg("ULP_CONFIG_DONE cleared after %dmsec\n", i * 10);
+ if (firmware_bug)
+ e_warn("ULP_CONFIG_DONE took %dmsec. This is a
firmware bug\n", i * 10);
+ else
+ e_dbg("ULP_CONFIG_DONE cleared after %dmsec\n", i * 10);
if (force) {
mac_reg = er32(H2ME);
