[PATCH v2 05/15] drm/vc4: hdmi: Restore cec physical address on reconnect

[Maxime Ripard]

From: Dom Cobley <popcorn...@gmail.com>

Currently we call cec_phys_addr_invalidate on a hotplug deassert.
That may be due to a TV power cycling, or an AVR being switched
on (and switching edid).

This makes CEC unusable since our controller wouldn't have a physical
address anymore.

Set it back up again on the hotplug assert.

Fixes: 15b4511a4af6 ("drm/vc4: add HDMI CEC support")
Signed-off-by: Dom Cobley <popcorn...@gmail.com>
Signed-off-by: Maxime Ripard <max...@cerno.tech>
---
 drivers/gpu/drm/vc4/vc4_hdmi.c | 24 ++++++++++++++++++------
 1 file changed, 18 insertions(+), 6 deletions(-)

diff --git a/drivers/gpu/drm/vc4/vc4_hdmi.c b/drivers/gpu/drm/vc4/vc4_hdmi.c
index 7945dbcee78c..c3a301396aad 100644
--- a/drivers/gpu/drm/vc4/vc4_hdmi.c
+++ b/drivers/gpu/drm/vc4/vc4_hdmi.c
@@ -136,20 +136,32 @@ static enum drm_connector_status
 vc4_hdmi_connector_detect(struct drm_connector *connector, bool force)
 {
        struct vc4_hdmi *vc4_hdmi = connector_to_vc4_hdmi(connector);
+       bool connected = false;
 
        if (vc4_hdmi->hpd_gpio) {
                if (gpio_get_value_cansleep(vc4_hdmi->hpd_gpio) ^
                    vc4_hdmi->hpd_active_low)
-                       return connector_status_connected;
-               cec_phys_addr_invalidate(vc4_hdmi->cec_adap);
-               return connector_status_disconnected;
+                       connected = true;
+       } else if (drm_probe_ddc(vc4_hdmi->ddc)) {
+               connected = true;
+       } else if (HDMI_READ(HDMI_HOTPLUG) & VC4_HDMI_HOTPLUG_CONNECTED) {
+               connected = true;
        }
 
-       if (drm_probe_ddc(vc4_hdmi->ddc))
-               return connector_status_connected;
+       if (connected) {
+               if (connector->status != connector_status_connected) {
+                       struct edid *edid = drm_get_edid(connector, 
vc4_hdmi->ddc);
+
+                       if (edid) {
+                               cec_s_phys_addr_from_edid(vc4_hdmi->cec_adap, 
edid);
+                               vc4_hdmi->encoder.hdmi_monitor = 
drm_detect_hdmi_monitor(edid);
+                               kfree(edid);
+                       }
+               }
 
-       if (HDMI_READ(HDMI_HOTPLUG) & VC4_HDMI_HOTPLUG_CONNECTED)
                return connector_status_connected;
+       }
+
        cec_phys_addr_invalidate(vc4_hdmi->cec_adap);
        return connector_status_disconnected;
 }
-- 
2.29.2