Use the new libsas event notifiers API, which requires callers to
explicitly pass the gfp_t memory allocation flags.
Context analysis:
aic94xx_hwi.c: asd_dl_tasklet_handler()
-> asd_ascb::tasklet_complete()
== escb_tasklet_complete()
-> aic94xx_scb.c: asd_phy_event_tasklet()
-> aic94xx_scb.c: asd_bytes_dmaed_tasklet()
-> aic94xx_scb.c: asd_link_reset_err_tasklet()
-> aic94xx_scb.c: asd_primitive_rcvd_tasklet()
All functions are invoked by escb_tasklet_complete(), which is invoked
by the tasklet handler. Pass GFP_ATOMIC.
Signed-off-by: Ahmed S. Darwish <a.darw...@linutronix.de>
---
drivers/scsi/aic94xx/aic94xx_scb.c | 18 +++++++++---------
1 file changed, 9 insertions(+), 9 deletions(-)
diff --git a/drivers/scsi/aic94xx/aic94xx_scb.c
b/drivers/scsi/aic94xx/aic94xx_scb.c
index 4a4e8aa227c5..18422a3f9ff0 100644
--- a/drivers/scsi/aic94xx/aic94xx_scb.c
+++ b/drivers/scsi/aic94xx/aic94xx_scb.c
@@ -80,7 +80,7 @@ static void asd_phy_event_tasklet(struct asd_ascb *ascb,
ASD_DPRINTK("phy%d: device unplugged\n", phy_id);
asd_turn_led(asd_ha, phy_id, 0);
sas_phy_disconnected(&phy->sas_phy);
- sas_notify_phy_event(&phy->sas_phy, PHYE_LOSS_OF_SIGNAL);
+ sas_notify_phy_event_gfp(&phy->sas_phy, PHYE_LOSS_OF_SIGNAL,
GFP_ATOMIC);
break;
case CURRENT_OOB_DONE:
/* hot plugged device */
@@ -88,12 +88,12 @@ static void asd_phy_event_tasklet(struct asd_ascb *ascb,
get_lrate_mode(phy, oob_mode);
ASD_DPRINTK("phy%d device plugged: lrate:0x%x, proto:0x%x\n",
phy_id, phy->sas_phy.linkrate, phy->sas_phy.iproto);
- sas_notify_phy_event(&phy->sas_phy, PHYE_OOB_DONE);
+ sas_notify_phy_event_gfp(&phy->sas_phy, PHYE_OOB_DONE,
GFP_ATOMIC);
break;
case CURRENT_SPINUP_HOLD:
/* hot plug SATA, no COMWAKE sent */
asd_turn_led(asd_ha, phy_id, 1);
- sas_notify_phy_event(&phy->sas_phy, PHYE_SPINUP_HOLD);
+ sas_notify_phy_event_gfp(&phy->sas_phy, PHYE_SPINUP_HOLD,
GFP_ATOMIC);
break;
case CURRENT_GTO_TIMEOUT:
case CURRENT_OOB_ERROR:
@@ -101,7 +101,7 @@ static void asd_phy_event_tasklet(struct asd_ascb *ascb,
dl->status_block[1]);
asd_turn_led(asd_ha, phy_id, 0);
sas_phy_disconnected(&phy->sas_phy);
- sas_notify_phy_event(&phy->sas_phy, PHYE_OOB_ERROR);
+ sas_notify_phy_event_gfp(&phy->sas_phy, PHYE_OOB_ERROR,
GFP_ATOMIC);
break;
}
}
@@ -232,7 +232,7 @@ static void asd_bytes_dmaed_tasklet(struct asd_ascb *ascb,
spin_unlock_irqrestore(&phy->sas_phy.frame_rcvd_lock, flags);
asd_dump_frame_rcvd(phy, dl);
asd_form_port(ascb->ha, phy);
- sas_notify_port_event(&phy->sas_phy, PORTE_BYTES_DMAED);
+ sas_notify_port_event_gfp(&phy->sas_phy, PORTE_BYTES_DMAED, GFP_ATOMIC);
}
static void asd_link_reset_err_tasklet(struct asd_ascb *ascb,
@@ -268,7 +268,7 @@ static void asd_link_reset_err_tasklet(struct asd_ascb
*ascb,
asd_turn_led(asd_ha, phy_id, 0);
sas_phy_disconnected(sas_phy);
asd_deform_port(asd_ha, phy);
- sas_notify_port_event(sas_phy, PORTE_LINK_RESET_ERR);
+ sas_notify_port_event_gfp(sas_phy, PORTE_LINK_RESET_ERR, GFP_ATOMIC);
if (retries_left == 0) {
int num = 1;
@@ -313,7 +313,7 @@ static void asd_primitive_rcvd_tasklet(struct asd_ascb
*ascb,
spin_lock_irqsave(&sas_phy->sas_prim_lock, flags);
sas_phy->sas_prim = ffs(cont);
spin_unlock_irqrestore(&sas_phy->sas_prim_lock, flags);
- sas_notify_port_event(sas_phy,PORTE_BROADCAST_RCVD);
+ sas_notify_port_event_gfp(sas_phy,PORTE_BROADCAST_RCVD,
GFP_ATOMIC);
break;
case LmUNKNOWNP:
@@ -334,7 +334,7 @@ static void asd_primitive_rcvd_tasklet(struct asd_ascb
*ascb,
/* The sequencer disables all phys on that port.
* We have to re-enable the phys ourselves. */
asd_deform_port(asd_ha, phy);
- sas_notify_port_event(sas_phy, PORTE_HARD_RESET);
+ sas_notify_port_event_gfp(sas_phy, PORTE_HARD_RESET,
GFP_ATOMIC);
break;
default:
@@ -565,7 +565,7 @@ static void escb_tasklet_complete(struct asd_ascb *ascb,
/* the device is gone */
sas_phy_disconnected(sas_phy);
asd_deform_port(asd_ha, phy);
- sas_notify_port_event(sas_phy, PORTE_TIMER_EVENT);
+ sas_notify_port_event_gfp(sas_phy, PORTE_TIMER_EVENT,
GFP_ATOMIC);
break;
default:
ASD_DPRINTK("%s: phy%d: unknown event:0x%x\n", __func__,
--
2.30.0
