From: Po-Hsu Lin <po-hsu....@canonical.com>
[ Upstream commit 3503ee6c0bec5f173d606359e6384a5ef85492fb ]
The udpgro.sh will always return 0 (unless the bpf selftest was not
build first) even if there are some failed sub test-cases.
Therefore the kselftest framework will report this case is OK.
Check and return the exit status of each test to make it easier to
spot real failures.
Signed-off-by: Po-Hsu Lin <po-hsu....@canonical.com>
Signed-off-by: David S. Miller <da...@davemloft.net>
Signed-off-by: Sasha Levin <sas...@kernel.org>
---
tools/testing/selftests/net/udpgro.sh | 34 +++++++++++++++++++++++++++
1 file changed, 34 insertions(+)
diff --git a/tools/testing/selftests/net/udpgro.sh
b/tools/testing/selftests/net/udpgro.sh
index ac2a30be9b325..f8a19f548ae9d 100755
--- a/tools/testing/selftests/net/udpgro.sh
+++ b/tools/testing/selftests/net/udpgro.sh
@@ -5,6 +5,14 @@
readonly PEER_NS="ns-peer-$(mktemp -u XXXXXX)"
+# set global exit status, but never reset nonzero one.
+check_err()
+{
+ if [ $ret -eq 0 ]; then
+ ret=$1
+ fi
+}
+
cleanup() {
local -r jobs="$(jobs -p)"
local -r ns="$(ip netns list|grep $PEER_NS)"
@@ -44,7 +52,9 @@ run_one() {
# Hack: let bg programs complete the startup
sleep 0.1
./udpgso_bench_tx ${tx_args}
+ ret=$?
wait $(jobs -p)
+ return $ret
}
run_test() {
@@ -87,8 +97,10 @@ run_one_nat() {
sleep 0.1
./udpgso_bench_tx ${tx_args}
+ ret=$?
kill -INT $pid
wait $(jobs -p)
+ return $ret
}
run_one_2sock() {
@@ -110,7 +122,9 @@ run_one_2sock() {
sleep 0.1
# first UDP GSO socket should be closed at this point
./udpgso_bench_tx ${tx_args}
+ ret=$?
wait $(jobs -p)
+ return $ret
}
run_nat_test() {
@@ -131,36 +145,54 @@ run_all() {
local -r core_args="-l 4"
local -r ipv4_args="${core_args} -4 -D 192.168.1.1"
local -r ipv6_args="${core_args} -6 -D 2001:db8::1"
+ ret=0
echo "ipv4"
run_test "no GRO" "${ipv4_args} -M 10 -s 1400" "-4 -n 10 -l 1400"
+ check_err $?
# explicitly check we are not receiving UDP_SEGMENT cmsg (-S -1)
# when GRO does not take place
run_test "no GRO chk cmsg" "${ipv4_args} -M 10 -s 1400" "-4 -n 10 -l
1400 -S -1"
+ check_err $?
# the GSO packets are aggregated because:
# * veth schedule napi after each xmit
# * segmentation happens in BH context, veth napi poll is delayed after
# the transmission of the last segment
run_test "GRO" "${ipv4_args} -M 1 -s 14720 -S 0 " "-4 -n 1 -l 14720"
+ check_err $?
run_test "GRO chk cmsg" "${ipv4_args} -M 1 -s 14720 -S 0 " "-4 -n 1 -l
14720 -S 1472"
+ check_err $?
run_test "GRO with custom segment size" "${ipv4_args} -M 1 -s 14720 -S
500 " "-4 -n 1 -l 14720"
+ check_err $?
run_test "GRO with custom segment size cmsg" "${ipv4_args} -M 1 -s
14720 -S 500 " "-4 -n 1 -l 14720 -S 500"
+ check_err $?
run_nat_test "bad GRO lookup" "${ipv4_args} -M 1 -s 14720 -S 0" "-n 10
-l 1472"
+ check_err $?
run_2sock_test "multiple GRO socks" "${ipv4_args} -M 1 -s 14720 -S 0 "
"-4 -n 1 -l 14720 -S 1472"
+ check_err $?
echo "ipv6"
run_test "no GRO" "${ipv6_args} -M 10 -s 1400" "-n 10 -l 1400"
+ check_err $?
run_test "no GRO chk cmsg" "${ipv6_args} -M 10 -s 1400" "-n 10 -l 1400
-S -1"
+ check_err $?
run_test "GRO" "${ipv6_args} -M 1 -s 14520 -S 0" "-n 1 -l 14520"
+ check_err $?
run_test "GRO chk cmsg" "${ipv6_args} -M 1 -s 14520 -S 0" "-n 1 -l
14520 -S 1452"
+ check_err $?
run_test "GRO with custom segment size" "${ipv6_args} -M 1 -s 14520 -S
500" "-n 1 -l 14520"
+ check_err $?
run_test "GRO with custom segment size cmsg" "${ipv6_args} -M 1 -s
14520 -S 500" "-n 1 -l 14520 -S 500"
+ check_err $?
run_nat_test "bad GRO lookup" "${ipv6_args} -M 1 -s 14520 -S 0" "-n 10
-l 1452"
+ check_err $?
run_2sock_test "multiple GRO socks" "${ipv6_args} -M 1 -s 14520 -S 0 "
"-n 1 -l 14520 -S 1452"
+ check_err $?
+ return $ret
}
if [ ! -f ../bpf/xdp_dummy.o ]; then
@@ -180,3 +212,5 @@ elif [[ $1 == "__subprocess_2sock" ]]; then
shift
run_one_2sock $@
fi
+
+exit $?
--
2.27.0
