Configuration was correct enough to work with the pre-configuration done by
uboot. While at it, also document the location.
Signed-off-by: Andreas Kemnade <andr...@kemnade.info>
---
arch/arm/boot/dts/imx6sl-tolino-shine3.dts | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/imx6sl-tolino-shine3.dts
b/arch/arm/boot/dts/imx6sl-tolino-shine3.dts
index 27143ea0f0f1..62d2ebda04ff 100644
--- a/arch/arm/boot/dts/imx6sl-tolino-shine3.dts
+++ b/arch/arm/boot/dts/imx6sl-tolino-shine3.dts
@@ -156,7 +156,7 @@
pinctrl_uart1: uart1grp {
fsl,pins = <
MX6SL_PAD_UART1_TXD__UART1_TX_DATA 0x1b0b1
- MX6SL_PAD_UART1_RXD__UART1_TX_DATA 0x1b0b1
+ MX6SL_PAD_UART1_RXD__UART1_RX_DATA 0x1b0b1
>;
};
--
2.20.1
