On 12/14/2020 10:07 AM, Rafał Miłecki wrote: > From: Rafał Miłecki <ra...@milecki.pl> > > PMB is a hardware block used for powering SoC devices like PCIe, USB, > SATA. Initially I planned to treat it as a reset controller and Philipp > pointed out in review that PMB driver should use a power subsystem. > > This is my refactored support. > > *** > > Please note one difference when compared to the initial reset attempt. > > As I store info about SoC devices in the driver now, I had to put > support for multiple buses there. That's required to avoid things like: > > compatible = "brcm,bcm4908-pmb-no-1"; > compatible = "brcm,bcm4908-pmb-no-2"; > > So now a single "reg" covers bigger buses (e.g. 0x40) in size, see: > > reg = <0x802800e0 0x40>; > > Other SoCs my use something like: > > reg = <0x802800e0 0x20>; > reg = <0x802800e0 0x60>; > > *** > > AFAIU this should go through Florian's tree. I based in on top of the > soc-arm64/next. > > V2: Use drivers/soc/bcm/bcm63xx/ and add Kconfig help message Series applied to drivers/next, thanks! -- Florian
