----- Le 13 Jan 21, à 13:45, Gilles Doffe gilles.do...@savoirfairelinux.com a 
écrit :

> The FID (Filter ID) is a 7 bits field used to link the VLAN table
> to the static and dynamic mac address tables.
> Until now the KSZ8795 driver could only add one VLAN as the FID was
> always set to 1.
> This commit allows setting a FID for each new active VLAN.
> The FID list is stored in a static table dynamically allocated from
> ks8795_fid structure.
> Each newly activated VLAN is associated to the next available FID.
> Only the VLAN 0 is not added to the list as it is a special VLAN.
> As it has a special meaning, see IEEE 802.1q.
> When a VLAN is no more used, the associated FID table entry is reset
> to 0.
> 
> Signed-off-by: Gilles DOFFE <gilles.do...@savoirfairelinux.com>
> ---
> drivers/net/dsa/microchip/ksz8795.c     | 59 +++++++++++++++++++++++--
> drivers/net/dsa/microchip/ksz8795_reg.h |  1 +
> drivers/net/dsa/microchip/ksz_common.h  |  1 +
> 3 files changed, 57 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/net/dsa/microchip/ksz8795.c
> b/drivers/net/dsa/microchip/ksz8795.c
> index c973db101b72..6962ba4ee125 100644
> --- a/drivers/net/dsa/microchip/ksz8795.c
> +++ b/drivers/net/dsa/microchip/ksz8795.c
> @@ -648,7 +648,7 @@ static enum dsa_tag_protocol 
> ksz8795_get_tag_protocol(struct
> dsa_switch *ds,
>                                                     int port,
>                                                     enum dsa_tag_protocol mp)
> {
> -     return DSA_TAG_PROTO_KSZ8795;
> +     return DSA_TAG_PROTO_NONE;

This is an oversight, will be removed in V2.

> }
> 
> static void ksz8795_get_strings(struct dsa_switch *ds, int port,
> @@ -796,6 +796,41 @@ static int ksz8795_port_vlan_filtering(struct dsa_switch
> *ds, int port,
>       return 0;
> }
> 
> +static void ksz8795_del_fid(u16 *ksz_fid_table, u16 vid)
> +{
> +     u8 i = 0;
> +
> +     if (!ksz_fid_table)
> +             return;
> +
> +     for (i = 0; i < VLAN_TABLE_FID_SIZE; i++) {
> +             if (ksz_fid_table[i] == vid) {
> +                     ksz_fid_table[i] = 0;
> +                     break;
> +             }
> +     }
> +}
> +
> +static int ksz8795_get_next_fid(u16 *ksz_fid_table, u16 vid, u8 *fid)
> +{
> +     u8 i = 0;
> +     int ret = -EOVERFLOW;
> +
> +     if (!ksz_fid_table)
> +             return ret;
> +
> +     for (i = 0; i < VLAN_TABLE_FID_SIZE; i++) {
> +             if (!ksz_fid_table[i]) {
> +                     ksz_fid_table[i] = vid;
> +                     *fid = i;
> +                     ret = 0;
> +                     break;
> +             }
> +     }
> +
> +     return ret;
> +}
> +
> static void ksz8795_port_vlan_add(struct dsa_switch *ds, int port,
>                                 const struct switchdev_obj_port_vlan *vlan)
> {
> @@ -803,17 +838,24 @@ static void ksz8795_port_vlan_add(struct dsa_switch *ds,
> int port,
>       struct ksz_device *dev = ds->priv;
>       u16 data, vid, new_pvid = 0;
>       u8 fid, member, valid;
> +     int ret;
> 
>       ksz_port_cfg(dev, port, P_TAG_CTRL, PORT_REMOVE_TAG, untagged);
> 
>       for (vid = vlan->vid_begin; vid <= vlan->vid_end; vid++) {
> +             if (vid == 0)
> +                     continue;
> +
>               ksz8795_r_vlan_table(dev, vid, &data);
>               ksz8795_from_vlan(data, &fid, &member, &valid);
> 
>               /* First time to setup the VLAN entry. */
>               if (!valid) {
> -                     /* Need to find a way to map VID to FID. */
> -                     fid = 1;
> +                     ret = ksz8795_get_next_fid(dev->ksz_fid_table, vid, 
> &fid);
> +                     if (ret) {
> +                             dev_err(ds->dev, "Switch FID table is full, 
> cannot add");
> +                             return;
> +                     }
>                       valid = 1;
>               }
>               member |= BIT(port);
> @@ -855,7 +897,7 @@ static int ksz8795_port_vlan_del(struct dsa_switch *ds, 
> int
> port,
> 
>               /* Invalidate the entry if no more member. */
>               if (!member) {
> -                     fid = 0;
> +                     ksz8795_del_fid(dev->ksz_fid_table, vid);
>                       valid = 0;
>               }
> 
> @@ -1087,6 +1129,9 @@ static int ksz8795_setup(struct dsa_switch *ds)
>       for (i = 0; i < (dev->num_vlans / 4); i++)
>               ksz8795_r_vlan_entries(dev, i);
> 
> +     /* Assign first FID to VLAN 1 and always return FID=0 for this vlan */
> +     dev->ksz_fid_table[0] = 1;
> +
>       /* Setup STP address for STP operation. */
>       memset(&alu, 0, sizeof(alu));
>       ether_addr_copy(alu.mac, eth_stp_addr);
> @@ -1261,6 +1306,12 @@ static int ksz8795_switch_init(struct ksz_device *dev)
>       /* set the real number of ports */
>       dev->ds->num_ports = dev->port_cnt;
> 
> +     dev->ksz_fid_table = devm_kzalloc(dev->dev,
> +                                       VLAN_TABLE_FID_SIZE * sizeof(u16),
> +                                       GFP_KERNEL);
> +     if (!dev->ksz_fid_table)
> +             return -ENOMEM;
> +
>       return 0;
> }
> 
> diff --git a/drivers/net/dsa/microchip/ksz8795_reg.h
> b/drivers/net/dsa/microchip/ksz8795_reg.h
> index 40372047d40d..fe4c4f7fdd47 100644
> --- a/drivers/net/dsa/microchip/ksz8795_reg.h
> +++ b/drivers/net/dsa/microchip/ksz8795_reg.h
> @@ -915,6 +915,7 @@
>  */
> 
> #define VLAN_TABLE_FID                        0x007F
> +#define VLAN_TABLE_FID_SIZE          128
> #define VLAN_TABLE_MEMBERSHIP         0x0F80
> #define VLAN_TABLE_VALID              0x1000
> 
> diff --git a/drivers/net/dsa/microchip/ksz_common.h
> b/drivers/net/dsa/microchip/ksz_common.h
> index 720f22275c84..44e97c55c2da 100644
> --- a/drivers/net/dsa/microchip/ksz_common.h
> +++ b/drivers/net/dsa/microchip/ksz_common.h
> @@ -77,6 +77,7 @@ struct ksz_device {
>       bool synclko_125;
> 
>       struct vlan_table *vlan_cache;
> +     u16 *ksz_fid_table;
> 
>       struct ksz_port *ports;
>       struct delayed_work mib_read;
> --
> 2.25.1

Reply via email to