Checking at both msm8909-pm8916.dtsi and msm8916.dtsi from downstream
it is indicated that "batt_id" channel has to be scaled with the default
function:
chan@31 {
label = "batt_id";
reg = <0x31>;
qcom,decimation = <0>;
qcom,pre-div-channel-scaling = <0>;
qcom,calibration-type = "ratiometric";
qcom,scale-function = <0>;
qcom,hw-settle-time = <0xb>;
qcom,fast-avg-setup = <0>;
};
Change LR_MUX2_BAT_ID scaling accordingly.
Signed-off-by: Jonathan Albrieux <[email protected]>
---
drivers/iio/adc/qcom-spmi-vadc.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/iio/adc/qcom-spmi-vadc.c b/drivers/iio/adc/qcom-spmi-vadc.c
index b0388f8a69f4..7e7d408452ec 100644
--- a/drivers/iio/adc/qcom-spmi-vadc.c
+++ b/drivers/iio/adc/qcom-spmi-vadc.c
@@ -598,7 +598,7 @@ static const struct vadc_channels vadc_chans[] = {
VADC_CHAN_NO_SCALE(P_MUX16_1_3, 1)
VADC_CHAN_NO_SCALE(LR_MUX1_BAT_THERM, 0)
- VADC_CHAN_NO_SCALE(LR_MUX2_BAT_ID, 0)
+ VADC_CHAN_VOLT(LR_MUX2_BAT_ID, 0, SCALE_DEFAULT)
VADC_CHAN_NO_SCALE(LR_MUX3_XO_THERM, 0)
VADC_CHAN_NO_SCALE(LR_MUX4_AMUX_THM1, 0)
VADC_CHAN_NO_SCALE(LR_MUX5_AMUX_THM2, 0)
--
2.17.1
