On Wed 13 Jan 13:42 CST 2021, AngeloGioacchino Del Regno wrote:
> Short-Circuit Protection (SCP) and Over-Current Protection (OCP) are
> now implemented in the driver: document the interrupts.
> This also fixes wrong documentation about the SCP interrupt for LAB.
>
Reviewed-by: Bjorn Andersson <bjorn.anders...@linaro.org>
Regards,
Bjorn
> Signed-off-by: AngeloGioacchino Del Regno
> <angelogioacchino.delre...@somainline.org>
> ---
> .../regulator/qcom-labibb-regulator.yaml | 20 +++++++++++--------
> 1 file changed, 12 insertions(+), 8 deletions(-)
>
> diff --git
> a/Documentation/devicetree/bindings/regulator/qcom-labibb-regulator.yaml
> b/Documentation/devicetree/bindings/regulator/qcom-labibb-regulator.yaml
> index 7a507692f1ba..cf784bd1f5e5 100644
> --- a/Documentation/devicetree/bindings/regulator/qcom-labibb-regulator.yaml
> +++ b/Documentation/devicetree/bindings/regulator/qcom-labibb-regulator.yaml
> @@ -29,9 +29,10 @@ properties:
> default: 200
>
> interrupts:
> - maxItems: 1
> + minItems: 1
> + maxItems: 2
> description:
> - Short-circuit interrupt for lab.
> + Short-circuit and over-current interrupts for lab.
>
> required:
> - interrupts
> @@ -47,9 +48,10 @@ properties:
> default: 300
>
> interrupts:
> - maxItems: 1
> + minItems: 1
> + maxItems: 2
> description:
> - Short-circuit interrupt for lab.
> + Short-circuit and over-current interrupts for ibb.
>
> required:
> - interrupts
> @@ -67,13 +69,15 @@ examples:
> compatible = "qcom,pmi8998-lab-ibb";
>
> lab {
> - interrupts = <0x3 0x0 IRQ_TYPE_EDGE_RISING>;
> - interrupt-names = "sc-err";
> + interrupts = <0x3 0xde 0x1 IRQ_TYPE_EDGE_RISING>,
> + <0x3 0xde 0x0 IRQ_TYPE_LEVEL_LOW>;
> + interrupt-names = "sc-err", "ocp";
> };
>
> ibb {
> - interrupts = <0x3 0x2 IRQ_TYPE_EDGE_RISING>;
> - interrupt-names = "sc-err";
> + interrupts = <0x3 0xdc 0x2 IRQ_TYPE_EDGE_RISING>,
> + <0x3 0xdc 0x0 IRQ_TYPE_LEVEL_LOW>;
> + interrupt-names = "sc-err", "ocp";
> };
> };
>
> --
> 2.29.2
>
