On 1/14/21 5:34 PM, Nava kishore Manne wrote:
> This patch adds support for Xilinx Dynamic Function eXchange(DFX) AXI
> shutdown manager IP. It can be used to safely handling the AXI traffic
> on a Reconfigurable Partition when it is undergoing dynamic reconfiguration
> and there by preventing system deadlock that may occur if AXI transactions
> are interrupted during reconfiguration.
>
> PR-Decoupler and AXI shutdown manager are completely different IPs.
> But both the IP registers are compatible and also both belong to the
> same sub-system (fpga-bridge).So using same driver for both IP's.
>
> Signed-off-by: Nava kishore Manne <nava.ma...@xilinx.com>
> ---
> drivers/fpga/xilinx-pr-decoupler.c | 35 ++++++++++++++++++++++++++----
It looks like the copyright is wrong, please review spelling of Xilix
* Copyright (c) 2017, Xilix Inc
> 1 file changed, 31 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/fpga/xilinx-pr-decoupler.c
> b/drivers/fpga/xilinx-pr-decoupler.c
> index 7d69af230567..c95f3d065ccb 100644
> --- a/drivers/fpga/xilinx-pr-decoupler.c
> +++ b/drivers/fpga/xilinx-pr-decoupler.c
> @@ -19,10 +19,15 @@
> #define CTRL_OFFSET 0
>
> struct xlnx_pr_decoupler_data {
> + const struct xlnx_config_data *ipconfig;
> void __iomem *io_base;
> struct clk *clk;
> };
>
> +struct xlnx_config_data {
> + char *name;
> +};
Move xlnx_config_data above xlnx_pr_decouple_data.
could you 'const' char *name ?
> +
> static inline void xlnx_pr_decoupler_write(struct xlnx_pr_decoupler_data *d,
> u32 offset, u32 val)
> {
> @@ -76,15 +81,28 @@ static const struct fpga_bridge_ops
> xlnx_pr_decoupler_br_ops = {
> .enable_show = xlnx_pr_decoupler_enable_show,
> };
>
> +static const struct xlnx_config_data decoupler_config = {
> + .name = "Xilinx PR Decoupler",
> +};
> +
> +static const struct xlnx_config_data shutdown_config = {
> + .name = "Xilinx DFX AXI shutdown mgr",
To be consistent with decoupler name,
shutdown mgr -> Shutdown Manager
> +};
> +
> static const struct of_device_id xlnx_pr_decoupler_of_match[] = {
> - { .compatible = "xlnx,pr-decoupler-1.00", },
> - { .compatible = "xlnx,pr-decoupler", },
> + { .compatible = "xlnx,pr-decoupler-1.00", .data = &decoupler_config },
> + { .compatible = "xlnx,pr-decoupler", .data = &decoupler_config },
> + { .compatible = "xlnx,dfx-axi-shutdown-manager-1.00",
> + .data = &shutdown_config },
> + { .compatible = "xlnx,dfx-axi-shutdown-manager",
> + .data = &shutdown_config },
> {},
> };
> MODULE_DEVICE_TABLE(of, xlnx_pr_decoupler_of_match);
>
> static int xlnx_pr_decoupler_probe(struct platform_device *pdev)
> {
> + struct device_node *np = pdev->dev.of_node;
> struct xlnx_pr_decoupler_data *priv;
> struct fpga_bridge *br;
> int err;
> @@ -94,6 +112,14 @@ static int xlnx_pr_decoupler_probe(struct platform_device
> *pdev)
> if (!priv)
> return -ENOMEM;
>
> + if (np) {
> + const struct of_device_id *match;
> +
> + match = of_match_node(xlnx_pr_decoupler_of_match, np);
> + if (match && match->data)
> + priv->ipconfig = match->data;
> + }
> +
> res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> priv->io_base = devm_ioremap_resource(&pdev->dev, res);
> if (IS_ERR(priv->io_base))
> @@ -114,7 +140,7 @@ static int xlnx_pr_decoupler_probe(struct platform_device
> *pdev)
>
> clk_disable(priv->clk);
>
> - br = devm_fpga_bridge_create(&pdev->dev, "Xilinx PR Decoupler",
> + br = devm_fpga_bridge_create(&pdev->dev, priv->ipconfig->name,
> &xlnx_pr_decoupler_br_ops, priv);
> if (!br) {
> err = -ENOMEM;
> @@ -125,7 +151,8 @@ static int xlnx_pr_decoupler_probe(struct platform_device
> *pdev)
>
> err = fpga_bridge_register(br);
> if (err) {
> - dev_err(&pdev->dev, "unable to register Xilinx PR Decoupler");
> + dev_err(&pdev->dev, "unable to register %s",
> + priv->ipconfig->name);
> goto err_clk;
> }
Look at XILINX_PR_DECOUPLER entry in Kconfig, maybe add something like
help
Say Y to enable drivers for the ... Decoupler or DFX AIX Shutdown Manager
Tom
>
