This patch adds suspend/resume support so that it is possible to
configure the LDOs and BUCKs as on or off during suspend phase as
well as to configure suspend specific voltages.
Signed-off-by: Christoph Fritz <chf.fr...@googlemail.com>
---
drivers/regulator/pf8x00-regulator.c | 75 ++++++++++++++++++++++++++--
1 file changed, 70 insertions(+), 5 deletions(-)
diff --git a/drivers/regulator/pf8x00-regulator.c
b/drivers/regulator/pf8x00-regulator.c
index 1e5582d73405..02892e04acce 100644
--- a/drivers/regulator/pf8x00-regulator.c
+++ b/drivers/regulator/pf8x00-regulator.c
@@ -125,8 +125,12 @@ enum pf8x00_devid {
#define PF8X00_DEVICE_FAM_MASK GENMASK(7, 4)
#define PF8X00_DEVICE_ID_MASK GENMASK(3, 0)
-struct pf8x00_regulator {
+struct pf8x00_regulator_data {
struct regulator_desc desc;
+ unsigned int suspend_enable_reg;
+ unsigned int suspend_enable_mask;
+ unsigned int suspend_voltage_reg;
+ unsigned int suspend_voltage_cache;
};
struct pf8x00_chip {
@@ -276,6 +280,53 @@ static int pf8x00_of_parse_cb(struct device_node *np,
return 0;
}
+static int pf8x00_suspend_enable(struct regulator_dev *rdev)
+{
+ struct pf8x00_regulator_data *regl = rdev_get_drvdata(rdev);
+ struct regmap *rmap = rdev_get_regmap(rdev);
+
+ return regmap_update_bits(rmap, regl->suspend_enable_reg,
+ regl->suspend_enable_mask,
+ regl->suspend_enable_mask);
+}
+
+static int pf8x00_suspend_disable(struct regulator_dev *rdev)
+{
+ struct pf8x00_regulator_data *regl = rdev_get_drvdata(rdev);
+ struct regmap *rmap = rdev_get_regmap(rdev);
+
+ return regmap_update_bits(rmap, regl->suspend_enable_reg,
+ regl->suspend_enable_mask, 0);
+}
+
+static int pf8x00_set_suspend_voltage(struct regulator_dev *rdev, int uV)
+{
+ struct pf8x00_regulator_data *regl = rdev_get_drvdata(rdev);
+ int ret;
+
+ if (regl->suspend_voltage_cache == uV)
+ return 0;
+
+ ret = regulator_map_voltage_iterate(rdev, uV, uV);
+ if (ret < 0) {
+ dev_err(rdev_get_dev(rdev), "failed to map %i uV\n", uV);
+ return ret;
+ }
+
+ dev_dbg(rdev_get_dev(rdev), "uV: %i, reg: 0x%x, msk: 0x%x, val: 0x%x\n",
+ uV, regl->suspend_voltage_reg, regl->desc.vsel_mask, ret);
+ ret = regmap_update_bits(rdev->regmap, regl->suspend_voltage_reg,
+ regl->desc.vsel_mask, ret);
+ if (ret < 0) {
+ dev_err(rdev_get_dev(rdev), "failed to set %i uV\n", uV);
+ return ret;
+ }
+
+ regl->suspend_voltage_cache = uV;
+
+ return 0;
+}
+
static const struct regulator_ops pf8x00_ldo_ops = {
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
@@ -283,6 +334,9 @@ static const struct regulator_ops pf8x00_ldo_ops = {
.list_voltage = regulator_list_voltage_table,
.set_voltage_sel = regulator_set_voltage_sel_regmap,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
+ .set_suspend_enable = pf8x00_suspend_enable,
+ .set_suspend_disable = pf8x00_suspend_disable,
+ .set_suspend_voltage = pf8x00_set_suspend_voltage,
};
@@ -295,6 +349,9 @@ static const struct regulator_ops pf8x00_buck1_6_ops = {
.get_voltage_sel = regulator_get_voltage_sel_regmap,
.get_current_limit = regulator_get_current_limit_regmap,
.set_current_limit = regulator_set_current_limit_regmap,
+ .set_suspend_enable = pf8x00_suspend_enable,
+ .set_suspend_disable = pf8x00_suspend_disable,
+ .set_suspend_voltage = pf8x00_set_suspend_voltage,
};
static const struct regulator_ops pf8x00_buck7_ops = {
@@ -306,6 +363,8 @@ static const struct regulator_ops pf8x00_buck7_ops = {
.get_voltage_sel = regulator_get_voltage_sel_regmap,
.get_current_limit = regulator_get_current_limit_regmap,
.set_current_limit = regulator_set_current_limit_regmap,
+ .set_suspend_enable = pf8x00_suspend_enable,
+ .set_suspend_disable = pf8x00_suspend_disable,
};
static const struct regulator_ops pf8x00_vsnvs_ops = {
@@ -337,6 +396,9 @@ static const struct regulator_ops pf8x00_vsnvs_ops = {
.disable_val = 0x0, \
.enable_mask = 2, \
}, \
+ .suspend_enable_reg = (base) + LDO_CONFIG2, \
+ .suspend_enable_mask = 1, \
+ .suspend_voltage_reg = (base) + LDO_STBY_VOLT, \
}
#define PF8X00BUCK(_id, _name, base, voltages) \
@@ -367,6 +429,9 @@ static const struct regulator_ops pf8x00_vsnvs_ops = {
.enable_mask = 0x3, \
.enable_time = 500, \
}, \
+ .suspend_enable_reg = (base) + SW_MODE1, \
+ .suspend_enable_mask = 0xc, \
+ .suspend_voltage_reg = (base) + SW_STBY_VOLT, \
}
#define PF8X00BUCK7(_name, base, voltages) \
@@ -415,7 +480,7 @@ static const struct regulator_ops pf8x00_vsnvs_ops = {
}, \
}
-static struct pf8x00_regulator pf8x00_regulators_data[PF8X00_MAX_REGULATORS] =
{
+static struct pf8x00_regulator_data pf8x00_regs_data[PF8X00_MAX_REGULATORS] = {
PF8X00LDO(1, "ldo1", PF8X00_LDO_BASE(PF8X00_LDO1), pf8x00_ldo_voltages),
PF8X00LDO(2, "ldo2", PF8X00_LDO_BASE(PF8X00_LDO2), pf8x00_ldo_voltages),
PF8X00LDO(3, "ldo3", PF8X00_LDO_BASE(PF8X00_LDO3), pf8x00_ldo_voltages),
@@ -500,12 +565,12 @@ static int pf8x00_i2c_probe(struct i2c_client *client)
if (ret)
return ret;
- for (id = 0; id < ARRAY_SIZE(pf8x00_regulators_data); id++) {
- struct pf8x00_regulator *data = &pf8x00_regulators_data[id];
+ for (id = 0; id < ARRAY_SIZE(pf8x00_regs_data); id++) {
+ struct pf8x00_regulator_data *data = &pf8x00_regs_data[id];
struct regulator_dev *rdev;
config.dev = chip->dev;
- config.driver_data = chip;
+ config.driver_data = data;
config.regmap = chip->regmap;
rdev = devm_regulator_register(&client->dev, &data->desc,
&config);
--
2.29.2
