The helper for obtaining HW-state based DVS voltage levels currently only
works for regulators using linear-ranges. Extend support to regulators with
simple linear mappings and add also proper error path if pickable-ranges
regulators call this.
Signed-off-by: Matti Vaittinen <matti.vaitti...@fi.rohmeurope.com>
---
Changes since v1:
- moved SNVS level adding to own patch
drivers/regulator/rohm-regulator.c | 17 +++++++++++++++--
1 file changed, 15 insertions(+), 2 deletions(-)
diff --git a/drivers/regulator/rohm-regulator.c
b/drivers/regulator/rohm-regulator.c
index 5c558b153d55..63aabb8c7786 100644
--- a/drivers/regulator/rohm-regulator.c
+++ b/drivers/regulator/rohm-regulator.c
@@ -22,13 +22,26 @@ static int set_dvs_level(const struct regulator_desc *desc,
return ret;
return 0;
}
-
+ /* If voltage is set to 0 => disable */
if (uv == 0) {
if (omask)
return regmap_update_bits(regmap, oreg, omask, 0);
}
+ /* Some setups don't allow setting own voltage but do allow enabling */
+ if (!mask) {
+ if (omask)
+ return regmap_update_bits(regmap, oreg, omask, omask);
+
+ return -EINVAL;
+ }
for (i = 0; i < desc->n_voltages; i++) {
- ret = regulator_desc_list_voltage_linear_range(desc, i);
+ /* NOTE to next hacker - Does not support pickable ranges */
+ if (desc->linear_range_selectors)
+ return -EINVAL;
+ if (desc->n_linear_ranges)
+ ret = regulator_desc_list_voltage_linear_range(desc, i);
+ else
+ ret = regulator_desc_list_voltage_linear(desc, i);
if (ret < 0)
continue;
if (ret == uv) {
--
2.25.4
--
Matti Vaittinen, Linux device drivers
ROHM Semiconductors, Finland SWDC
Kiviharjunlenkki 1E
90220 OULU
FINLAND
~~~ "I don't think so," said Rene Descartes. Just then he vanished ~~~
Simon says - in Latin please.
~~~ "non cogito me" dixit Rene Descarte, deinde evanescavit ~~~
Thanks to Simon Glass for the translation =]
