Add support for the msg26xx touchscreen IC from MStar.
This driver reuses zinitix.c structure, while the checksum and irq handler
functions are based on out-of-tree driver for Alcatel Idol 3 (4.7").
Signed-off-by: Vincent Knecht <vincent.kne...@mailoo.org>
---
Changed in v2:
- don't use bitfields in packet struct, to prevent endian-ness related problems
(Dmitry)
- fix reset gpiod calls order in mstar_power_on() (Dmitry)
---
drivers/input/touchscreen/Kconfig | 12 +
drivers/input/touchscreen/Makefile | 1 +
drivers/input/touchscreen/msg26xx.c | 369 ++++++++++++++++++++++++++++
3 files changed, 382 insertions(+)
create mode 100644 drivers/input/touchscreen/msg26xx.c
diff --git a/drivers/input/touchscreen/Kconfig
b/drivers/input/touchscreen/Kconfig
index f012fe746df0..bc4f604b4841 100644
--- a/drivers/input/touchscreen/Kconfig
+++ b/drivers/input/touchscreen/Kconfig
@@ -1334,4 +1334,16 @@ config TOUCHSCREEN_ZINITIX
To compile this driver as a module, choose M here: the
module will be called zinitix.
+config TOUCHSCREEN_MSG26XX
+ tristate "MStar msg26xx touchscreen support"
+ depends on I2C
+ depends on GPIOLIB || COMPILE_TEST
+ help
+ Say Y here if you have an I2C touchscreen using MStar msg26xx.
+
+ If unsure, say N.
+
+ To compile this driver as a module, choose M here: the
+ module will be called msg26xx.
+
endif
diff --git a/drivers/input/touchscreen/Makefile
b/drivers/input/touchscreen/Makefile
index 6233541e9173..830ebf4973cb 100644
--- a/drivers/input/touchscreen/Makefile
+++ b/drivers/input/touchscreen/Makefile
@@ -112,3 +112,4 @@ obj-$(CONFIG_TOUCHSCREEN_ROHM_BU21023) +=
rohm_bu21023.o
obj-$(CONFIG_TOUCHSCREEN_RASPBERRYPI_FW) += raspberrypi-ts.o
obj-$(CONFIG_TOUCHSCREEN_IQS5XX) += iqs5xx.o
obj-$(CONFIG_TOUCHSCREEN_ZINITIX) += zinitix.o
+obj-$(CONFIG_TOUCHSCREEN_MSG26XX) += msg26xx.o
diff --git a/drivers/input/touchscreen/msg26xx.c
b/drivers/input/touchscreen/msg26xx.c
new file mode 100644
index 000000000000..6c1b1dd3c1ae
--- /dev/null
+++ b/drivers/input/touchscreen/msg26xx.c
@@ -0,0 +1,369 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Driver for MStar msg26xx touchscreens
+ *
+ * Copyright (c) 2021 Vincent Knecht <vincent.kne...@mailoo.org>
+ *
+ * Checksum and IRQ handler based on mstar_drv_common.c and
mstar_drv_mutual_fw_control.c
+ * Copyright (c) 2006-2012 MStar Semiconductor, Inc.
+ *
+ * Driver structure based on zinitix.c by Michael Srba <michael.s...@seznam.cz>
+ */
+
+#include <linux/delay.h>
+#include <linux/gpio.h>
+#include <linux/i2c.h>
+#include <linux/input.h>
+#include <linux/input/mt.h>
+#include <linux/input/touchscreen.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/regulator/consumer.h>
+#include <linux/slab.h>
+
+#define MODE_DATA_RAW 0x5A
+
+#define TPD_WIDTH 2048
+#define TPD_HEIGHT 2048
+
+#define MAX_SUPPORTED_FINGER_NUM 5
+
+#define CHIP_ON_DELAY 15 // ms
+#define FIRMWARE_ON_DELAY 50 // ms
+
+struct point_coord {
+ u16 x;
+ u16 y;
+};
+
+struct packet {
+ u8 xy_hi; /* higher bits of x and y coordinates */
+ u8 x_low;
+ u8 y_low;
+ u8 pressure;
+};
+
+struct touch_event {
+ u8 mode;
+ struct packet pkt[MAX_SUPPORTED_FINGER_NUM];
+ u8 proximity;
+ u8 checksum;
+};
+
+struct msg26xx_ts_data {
+ struct i2c_client *client;
+ struct input_dev *input_dev;
+ struct touchscreen_properties prop;
+ struct regulator_bulk_data supplies[2];
+ struct gpio_desc *reset_gpiod;
+};
+
+static int mstar_init_regulators(struct msg26xx_ts_data *msg26xx)
+{
+ struct i2c_client *client = msg26xx->client;
+ int error;
+
+ msg26xx->supplies[0].supply = "vdd";
+ msg26xx->supplies[1].supply = "vddio";
+ error = devm_regulator_bulk_get(&client->dev,
+ ARRAY_SIZE(msg26xx->supplies),
+ msg26xx->supplies);
+ if (error < 0) {
+ dev_err(&client->dev, "Failed to get regulators: %d\n", error);
+ return error;
+ }
+
+ return 0;
+}
+
+static void mstar_power_on(struct msg26xx_ts_data *msg26xx)
+{
+ gpiod_set_value(msg26xx->reset_gpiod, 1);
+ mdelay(10);
+ gpiod_set_value(msg26xx->reset_gpiod, 0);
+ mdelay(FIRMWARE_ON_DELAY);
+
+ enable_irq(msg26xx->client->irq);
+}
+
+static void mstar_report_finger(struct msg26xx_ts_data *msg26xx, int slot,
+ const struct point_coord *pc)
+{
+ input_mt_slot(msg26xx->input_dev, slot);
+ input_mt_report_slot_state(msg26xx->input_dev, MT_TOOL_FINGER, true);
+ touchscreen_report_pos(msg26xx->input_dev, &msg26xx->prop, pc->x,
pc->y, true);
+ input_report_abs(msg26xx->input_dev, ABS_MT_TOUCH_MAJOR, 1);
+}
+
+static u8 mstar_checksum(u8 *data, u32 length)
+{
+ s32 sum = 0;
+ u32 i;
+
+ for (i = 0; i < length; i++)
+ sum += data[i];
+
+ return (u8)((-sum) & 0xFF);
+}
+
+static irqreturn_t mstar_ts_irq_handler(int irq, void *msg26xx_handler)
+{
+ struct msg26xx_ts_data *msg26xx = msg26xx_handler;
+ struct i2c_client *client = msg26xx->client;
+ struct touch_event touch_event;
+ struct point_coord coord;
+ struct i2c_msg msg[1];
+ struct packet *p;
+ u32 len;
+ int ret;
+ int i;
+
+ len = sizeof(struct touch_event);
+ memset(&touch_event, 0, len);
+
+ msg[0].addr = client->addr;
+ msg[0].flags = I2C_M_RD;
+ msg[0].len = len;
+ msg[0].buf = (u8 *)&touch_event;
+
+ ret = i2c_transfer(client->adapter, msg, 1);
+ if (ret != 1) {
+ dev_err(&client->dev, "Failed I2C transfer in irq handler!\n");
+ goto out;
+ }
+
+ if (touch_event.mode != MODE_DATA_RAW)
+ goto out;
+
+ if (mstar_checksum((u8 *)&touch_event, len - 1) !=
touch_event.checksum) {
+ dev_err(&client->dev, "Failed checksum!\n");
+ goto out;
+ }
+
+ for (i = 0; i < MAX_SUPPORTED_FINGER_NUM; i++) {
+ p = &touch_event.pkt[i];
+ /* Ignore non-pressed finger data */
+ if (p->xy_hi == 0xFF && p->x_low == 0xFF && p->y_low == 0xFF)
+ continue;
+
+ coord.x = (((p->xy_hi & 0xF0) << 4) | p->x_low) *
msg26xx->prop.max_x / TPD_WIDTH;
+ coord.y = (((p->xy_hi & 0x0F) << 8) | p->y_low) *
msg26xx->prop.max_y / TPD_HEIGHT;
+ mstar_report_finger(msg26xx, i, &coord);
+ }
+
+ input_mt_sync_frame(msg26xx->input_dev);
+ input_sync(msg26xx->input_dev);
+
+out:
+ return IRQ_HANDLED;
+}
+
+static int mstar_start(struct msg26xx_ts_data *msg26xx)
+{
+ int error;
+
+ error = regulator_bulk_enable(ARRAY_SIZE(msg26xx->supplies),
+ msg26xx->supplies);
+ if (error) {
+ dev_err(&msg26xx->client->dev,
+ "Failed to enable regulators: %d\n", error);
+ return error;
+ }
+
+ msleep(CHIP_ON_DELAY);
+
+ mstar_power_on(msg26xx);
+
+ return 0;
+}
+
+static int mstar_stop(struct msg26xx_ts_data *msg26xx)
+{
+ int error;
+
+ disable_irq(msg26xx->client->irq);
+
+ error = regulator_bulk_disable(ARRAY_SIZE(msg26xx->supplies),
+ msg26xx->supplies);
+ if (error) {
+ dev_err(&msg26xx->client->dev,
+ "Failed to disable regulators: %d\n", error);
+ return error;
+ }
+
+ return 0;
+}
+
+static int mstar_input_open(struct input_dev *dev)
+{
+ struct msg26xx_ts_data *msg26xx = input_get_drvdata(dev);
+
+ return mstar_start(msg26xx);
+}
+
+static void mstar_input_close(struct input_dev *dev)
+{
+ struct msg26xx_ts_data *msg26xx = input_get_drvdata(dev);
+
+ mstar_stop(msg26xx);
+}
+
+static int mstar_init_input_dev(struct msg26xx_ts_data *msg26xx)
+{
+ struct input_dev *input_dev;
+ int error;
+
+ input_dev = devm_input_allocate_device(&msg26xx->client->dev);
+ if (!input_dev) {
+ dev_err(&msg26xx->client->dev,
+ "Failed to allocate input device.");
+ return -ENOMEM;
+ }
+
+ input_set_drvdata(input_dev, msg26xx);
+ msg26xx->input_dev = input_dev;
+
+ input_dev->name = "MStar TouchScreen";
+ input_dev->phys = "input/ts";
+ input_dev->id.bustype = BUS_I2C;
+ input_dev->open = mstar_input_open;
+ input_dev->close = mstar_input_close;
+
+ input_set_capability(input_dev, EV_ABS, ABS_MT_POSITION_X);
+ input_set_capability(input_dev, EV_ABS, ABS_MT_POSITION_Y);
+ input_set_abs_params(input_dev, ABS_MT_WIDTH_MAJOR, 0, 15, 0, 0);
+ input_set_abs_params(input_dev, ABS_MT_TOUCH_MAJOR, 0, 255, 0, 0);
+
+ touchscreen_parse_properties(input_dev, true, &msg26xx->prop);
+ if (!msg26xx->prop.max_x || !msg26xx->prop.max_y) {
+ dev_err(&msg26xx->client->dev,
+ "touchscreen-size-x and/or touchscreen-size-y not set
in dts\n");
+ return -EINVAL;
+ }
+
+ error = input_mt_init_slots(input_dev, MAX_SUPPORTED_FINGER_NUM,
+ INPUT_MT_DIRECT | INPUT_MT_DROP_UNUSED);
+ if (error) {
+ dev_err(&msg26xx->client->dev,
+ "Failed to initialize MT slots: %d", error);
+ return error;
+ }
+
+ error = input_register_device(input_dev);
+ if (error) {
+ dev_err(&msg26xx->client->dev,
+ "Failed to register input device: %d", error);
+ return error;
+ }
+
+ return 0;
+}
+
+static int mstar_ts_probe(struct i2c_client *client)
+{
+ struct msg26xx_ts_data *msg26xx;
+ int error;
+
+ if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {
+ dev_err(&client->dev,
+ "Failed to assert adapter's support for plain I2C.\n");
+ return -ENXIO;
+ }
+
+ msg26xx = devm_kzalloc(&client->dev, sizeof(*msg26xx), GFP_KERNEL);
+ if (!msg26xx)
+ return -ENOMEM;
+
+ msg26xx->client = client;
+ i2c_set_clientdata(client, msg26xx);
+
+ error = mstar_init_regulators(msg26xx);
+ if (error) {
+ dev_err(&client->dev,
+ "Failed to initialize regulators: %d\n", error);
+ return error;
+ }
+
+ msg26xx->reset_gpiod = devm_gpiod_get(&client->dev, "reset",
GPIOD_OUT_LOW);
+ if (IS_ERR(msg26xx->reset_gpiod)) {
+ error = PTR_ERR(msg26xx->reset_gpiod);
+ dev_err(&client->dev, "Failed to request reset GPIO: %d\n",
error);
+ return error;
+ }
+
+ error = mstar_init_input_dev(msg26xx);
+ if (error) {
+ dev_err(&client->dev,
+ "Failed to initialize input device: %d\n", error);
+ return error;
+ }
+
+ irq_set_status_flags(client->irq, IRQ_NOAUTOEN);
+ error = devm_request_threaded_irq(&client->dev, client->irq,
+ NULL, mstar_ts_irq_handler,
+ IRQF_ONESHOT, client->name, msg26xx);
+ if (error) {
+ dev_err(&client->dev, "Failed to request IRQ: %d\n", error);
+ return error;
+ }
+
+ return 0;
+}
+
+static int __maybe_unused mstar_suspend(struct device *dev)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct msg26xx_ts_data *msg26xx = i2c_get_clientdata(client);
+
+ mutex_lock(&msg26xx->input_dev->mutex);
+
+ if (input_device_enabled(msg26xx->input_dev))
+ mstar_stop(msg26xx);
+
+ mutex_unlock(&msg26xx->input_dev->mutex);
+
+ return 0;
+}
+
+static int __maybe_unused mstar_resume(struct device *dev)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct msg26xx_ts_data *msg26xx = i2c_get_clientdata(client);
+ int ret = 0;
+
+ mutex_lock(&msg26xx->input_dev->mutex);
+
+ if (input_device_enabled(msg26xx->input_dev))
+ ret = mstar_start(msg26xx);
+
+ mutex_unlock(&msg26xx->input_dev->mutex);
+
+ return ret;
+}
+
+static SIMPLE_DEV_PM_OPS(mstar_pm_ops, mstar_suspend, mstar_resume);
+
+#ifdef CONFIG_OF
+static const struct of_device_id mstar_of_match[] = {
+ { .compatible = "mstar,msg26xx" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, mstar_of_match);
+#endif
+
+static struct i2c_driver mstar_ts_driver = {
+ .probe_new = mstar_ts_probe,
+ .driver = {
+ .name = "MStar-TS",
+ .pm = &mstar_pm_ops,
+ .of_match_table = of_match_ptr(mstar_of_match),
+ },
+};
+module_i2c_driver(mstar_ts_driver);
+
+MODULE_AUTHOR("Vincent Knecht <vincent.kne...@mailoo.org>");
+MODULE_DESCRIPTION("MStar touchscreen driver");
+MODULE_LICENSE("GPL v2");
--
2.29.2
