From: Vladimir Oltean <vladimir.olt...@nxp.com> commit 07b90056cb15ff9877dca0d8f1b6583d1051f724 upstream.
Currently the following happens when a DSA master driver unbinds while there are DSA switches attached to it: $ echo 0000:00:00.5 > /sys/bus/pci/drivers/mscc_felix/unbind ------------[ cut here ]------------ WARNING: CPU: 0 PID: 392 at net/core/dev.c:9507 Call trace: rollback_registered_many+0x5fc/0x688 unregister_netdevice_queue+0x98/0x120 dsa_slave_destroy+0x4c/0x88 dsa_port_teardown.part.16+0x78/0xb0 dsa_tree_teardown_switches+0x58/0xc0 dsa_unregister_switch+0x104/0x1b8 felix_pci_remove+0x24/0x48 pci_device_remove+0x48/0xf0 device_release_driver_internal+0x118/0x1e8 device_driver_detach+0x28/0x38 unbind_store+0xd0/0x100 Located at the above location is this WARN_ON: /* Notifier chain MUST detach us all upper devices. */ WARN_ON(netdev_has_any_upper_dev(dev)); Other stacked interfaces, like VLAN, do indeed listen for NETDEV_UNREGISTER on the real_dev and also unregister themselves at that time, which is clearly the behavior that rollback_registered_many expects. But DSA interfaces are not VLAN. They have backing hardware (platform devices, PCI devices, MDIO, SPI etc) which have a life cycle of their own and we can't just trigger an unregister from the DSA framework when we receive a netdev notifier that the master unregisters. Luckily, there is something we can do, and that is to inform the driver core that we have a runtime dependency to the DSA master interface's device, and create a device link where that is the supplier and we are the consumer. Having this device link will make the DSA switch unbind before the DSA master unbinds, which is enough to avoid the WARN_ON from rollback_registered_many. Note that even before the blamed commit, DSA did nothing intelligent when the master interface got unregistered either. See the discussion here: https://lore.kernel.org/netdev/20200505210253.20311-1-f.faine...@gmail.com/ But this time, at least the WARN_ON is loud enough that the upper_dev_link commit can be blamed. The advantage with this approach vs dev_hold(master) in the attached link is that the latter is not meant for long term reference counting. With dev_hold, the only thing that will happen is that when the user attempts an unbind of the DSA master, netdev_wait_allrefs will keep waiting and waiting, due to DSA keeping the refcount forever. DSA would not access freed memory corresponding to the master interface, but the unbind would still result in a freeze. Whereas with device links, graceful teardown is ensured. It even works with cascaded DSA trees. $ echo 0000:00:00.2 > /sys/bus/pci/drivers/fsl_enetc/unbind [ 1818.797546] device swp0 left promiscuous mode [ 1819.301112] sja1105 spi2.0: Link is Down [ 1819.307981] DSA: tree 1 torn down [ 1819.312408] device eno2 left promiscuous mode [ 1819.656803] mscc_felix 0000:00:00.5: Link is Down [ 1819.667194] DSA: tree 0 torn down [ 1819.711557] fsl_enetc 0000:00:00.2 eno2: Link is Down This approach allows us to keep the DSA framework absolutely unchanged, and the driver core will just know to unbind us first when the master goes away - as opposed to the large (and probably impossible) rework required if attempting to listen for NETDEV_UNREGISTER. As per the documentation at Documentation/driver-api/device_link.rst, specifying the DL_FLAG_AUTOREMOVE_CONSUMER flag causes the device link to be automatically purged when the consumer fails to probe or later unbinds. So we don't need to keep the consumer_link variable in struct dsa_switch. Fixes: 2f1e8ea726e9 ("net: dsa: link interfaces with the DSA master to get rid of lockdep warnings") Signed-off-by: Vladimir Oltean <vladimir.olt...@nxp.com> Reviewed-by: Florian Fainelli <f.faine...@gmail.com> Tested-by: Florian Fainelli <f.faine...@gmail.com> Link: https://lore.kernel.org/r/20210111230943.3701806-1-olte...@gmail.com Signed-off-by: Jakub Kicinski <k...@kernel.org> Signed-off-by: Greg Kroah-Hartman <gre...@linuxfoundation.org> --- net/dsa/master.c | 10 ++++++++++ 1 file changed, 10 insertions(+) --- a/net/dsa/master.c +++ b/net/dsa/master.c @@ -308,8 +308,18 @@ static struct lock_class_key dsa_master_ int dsa_master_setup(struct net_device *dev, struct dsa_port *cpu_dp) { + struct dsa_switch *ds = cpu_dp->ds; + struct device_link *consumer_link; int ret; + /* The DSA master must use SET_NETDEV_DEV for this to work. */ + consumer_link = device_link_add(ds->dev, dev->dev.parent, + DL_FLAG_AUTOREMOVE_CONSUMER); + if (!consumer_link) + netdev_err(dev, + "Failed to create a device link to DSA switch %s\n", + dev_name(ds->dev)); + rtnl_lock(); ret = dev_set_mtu(dev, ETH_DATA_LEN + cpu_dp->tag_ops->overhead); rtnl_unlock();