Changelog:
v10:
- Addressed a lot of comments form James Morse and from Marc Zyngier
- Added review-by's
- Synchronized with mainline
v9: - 9 patches from previous series landed in upstream, so now series
is smaller
- Added two patches from James Morse to address idmap issues for
machines
with high physical addresses.
- Addressed comments from Selin Dag about compiling issues. He also
tested
my series and got similar performance results: ~60 ms instead of ~580
ms
with an initramfs size of ~120MB.
v8:
- Synced with mainline to keep series up-to-date
v7:
-- Addressed comments from James Morse
- arm64: hibernate: pass the allocated pgdp to ttbr0
Removed "Fixes" tag, and added Added Reviewed-by: James Morse
- arm64: hibernate: check pgd table allocation
Sent out as a standalone patch so it can be sent to stable
Series applies on mainline + this patch
- arm64: hibernate: add trans_pgd public functions
Remove second allocation of tmp_pg_dir in swsusp_arch_resume
Added Reviewed-by: James Morse <[email protected]>
- arm64: kexec: move relocation function setup and clean up
Fixed typo in commit log
Changed kern_reloc to phys_addr_t types.
Added explanation why kern_reloc is needed.
Split into four patches:
arm64: kexec: make dtb_mem always enabled
arm64: kexec: remove unnecessary debug prints
arm64: kexec: call kexec_image_info only once
arm64: kexec: move relocation function setup
- arm64: kexec: add expandable argument to relocation function
Changed types of new arguments from unsigned long to phys_addr_t.
Changed offset prefix to KEXEC_*
Split into four patches:
arm64: kexec: cpu_soft_restart change argument types
arm64: kexec: arm64_relocate_new_kernel clean-ups
arm64: kexec: arm64_relocate_new_kernel don't use x0 as temp
arm64: kexec: add expandable argument to relocation function
- arm64: kexec: configure trans_pgd page table for kexec
Added invalid entries into EL2 vector table
Removed KEXEC_EL2_VECTOR_TABLE_SIZE and KEXEC_EL2_VECTOR_TABLE_OFFSET
Copy relocation functions and table into separate pages
Changed types in kern_reloc_arg.
Split into three patches:
arm64: kexec: offset for relocation function
arm64: kexec: kexec EL2 vectors
arm64: kexec: configure trans_pgd page table for kexec
- arm64: kexec: enable MMU during kexec relocation
Split into two patches:
arm64: kexec: enable MMU during kexec relocation
arm64: kexec: remove head from relocation argument
v6:
- Sync with mainline tip
- Added Acked's from Dave Young
v5:
- Addressed comments from Matthias Brugger: added review-by's, improved
comments, and made cleanups to swsusp_arch_resume() in addition to
create_safe_exec_page().
- Synced with mainline tip.
v4:
- Addressed comments from James Morse.
- Split "check pgd table allocation" into two patches, and moved to
the beginning of series for simpler backport of the fixes.
Added "Fixes:" tags to commit logs.
- Changed "arm64, hibernate:" to "arm64: hibernate:"
- Added Reviewed-by's
- Moved "add PUD_SECT_RDONLY" earlier in series to be with other
clean-ups
- Added "Derived from:" to arch/arm64/mm/trans_pgd.c
- Removed "flags" from trans_info
- Changed .trans_alloc_page assumption to return zeroed page.
- Simplify changes to trans_pgd_map_page(), by keeping the old
code.
- Simplify changes to trans_pgd_create_copy, by keeping the old
code.
- Removed: "add trans_pgd_create_empty"
- replace init_mm with NULL, and keep using non "__" version of
populate functions.
v3:
- Split changes to create_safe_exec_page() into several patches for
easier review as request by Mark Rutland. This is why this series
has 3 more patches.
- Renamed trans_table to tans_pgd as agreed with Mark. The header
comment in trans_pgd.c explains that trans stands for
transitional page tables. Meaning they are used in transition
between two kernels.
v2:
- Fixed hibernate bug reported by James Morse
- Addressed comments from James Morse:
* More incremental changes to trans_table
* Removed TRANS_FORCEMAP
* Added kexec reboot data for image with 380M in size.
Enable MMU during kexec relocation in order to improve reboot performance.
If kexec functionality is used for a fast system update, with a minimal
downtime, the relocation of kernel + initramfs takes a significant portion
of reboot.
The reason for slow relocation is because it is done without MMU, and thus
not benefiting from D-Cache.
Performance data
----------------
For this experiment, the size of kernel plus initramfs is small, only 25M.
If initramfs was larger, than the improvements would be greater, as time
spent in relocation is proportional to the size of relocation.
Previously:
kernel shutdown 0.022131328s
relocation 0.440510736s
kernel startup 0.294706768s
Relocation was taking: 58.2% of reboot time
Now:
kernel shutdown 0.032066576s
relocation 0.022158152s
kernel startup 0.296055880s
Now: Relocation takes 6.3% of reboot time
Total reboot is x2.16 times faster.
With bigger userland (fitImage 380M), the reboot time is improved by 3.57s,
and is reduced from 3.9s down to 0.33s
Previous approaches and discussions
-----------------------------------
v9:
https://lore.kernel.org/lkml/[email protected]
v8:
https://lore.kernel.org/lkml/[email protected]
v7:
https://lore.kernel.org/lkml/[email protected]
v6:
https://lore.kernel.org/lkml/[email protected]
v5:
https://lore.kernel.org/lkml/[email protected]
v4:
https://lore.kernel.org/lkml/[email protected]
v3:
https://lore.kernel.org/lkml/[email protected]
v2:
https://lore.kernel.org/lkml/[email protected]
v1:
https://lore.kernel.org/lkml/[email protected]
Older approaches:
https://lore.kernel.org/lkml/[email protected]
reserve space for kexec to avoid relocation, involves changes to generic code
to optimize a problem that exists on arm64 only:
https://lore.kernel.org/lkml/[email protected]
The first attempt to enable MMU, some bugs that prevented performance
improvement. The page tables unnecessary configured idmap for the whole
physical space.
https://lore.kernel.org/lkml/[email protected]
No linear copy, bug with EL2 reboots.
James Morse (2):
arm64: mm: Always update TCR_EL1 from __cpu_set_tcr_t0sz()
arm64: trans_pgd: hibernate: idmap the single page that holds the copy
page routines
Pavel Tatashin (16):
arm64: kexec: make dtb_mem always enabled
arm64: hibernate: variable pudp is used instead of pd4dp
arm64: hibernate: move page handling function to new trans_pgd.c
arm64: trans_pgd: make trans_pgd_map_page generic
arm64: trans_pgd: pass allocator trans_pgd_create_copy
arm64: trans_pgd: pass NULL instead of init_mm to *_populate functions
arm64: kexec: move relocation function setup
arm64: kexec: call kexec_image_info only once
arm64: kexec: arm64_relocate_new_kernel clean-ups and optimizations
arm64: kexec: arm64_relocate_new_kernel don't use x0 as temp
arm64: kexec: add expandable argument to relocation function
arm64: kexec: use ld script for relocation function
arm64: kexec: kexec may require EL2 vectors
arm64: kexec: configure trans_pgd page table for kexec
arm64: kexec: enable MMU during kexec relocation
arm64: kexec: remove head from relocation argument
arch/arm64/Kconfig | 4 +
arch/arm64/include/asm/kexec.h | 42 +++-
arch/arm64/include/asm/mmu_context.h | 7 +-
arch/arm64/include/asm/sections.h | 1 +
arch/arm64/include/asm/trans_pgd.h | 39 ++++
arch/arm64/kernel/asm-offsets.c | 15 ++
arch/arm64/kernel/cpu-reset.S | 11 +-
arch/arm64/kernel/cpu-reset.h | 8 +-
arch/arm64/kernel/hibernate.c | 271 +++-------------------
arch/arm64/kernel/machine_kexec.c | 182 +++++++++++----
arch/arm64/kernel/relocate_kernel.S | 218 ++++++++++--------
arch/arm64/kernel/vmlinux.lds.S | 19 ++
arch/arm64/mm/Makefile | 1 +
arch/arm64/mm/trans_pgd.c | 324 +++++++++++++++++++++++++++
14 files changed, 749 insertions(+), 393 deletions(-)
create mode 100644 arch/arm64/include/asm/trans_pgd.h
create mode 100644 arch/arm64/mm/trans_pgd.c
--
2.25.1
