Can this be confirmed? Shawn Starr wrote: > Just a while ago, my system just started acting funny. I couldn't use w, > top, ps, and then some of my X applications started to freeze too. > I couldn't even kill those hung processes because they'd hang too. So > When i tried to restart ctrl+alt+del, it did not kill the hung processes > and i had to hard restart. > > I dont know what triggered it but here's my dmesg and motherboard > information: > > Motherboard: AcerOPEN AP53/AX - Latest flash bios: R3.A0 (1997) > RAM: 64MB EDO: Kingston, 60ns > Chipset: 430HX > Parallel port: SPP/ECP/EPP > COM ports: 16C550 > AMI Bios > RTC & Battery: Dallas DS12887A - Ds12B887 compatable > (512KB?) Pipeline burst cache > > *NOTE: This Pentium 200Mhz oddly has USB support (disabled right now). > It has first generation USB. 2 ports. > > Inspecting /boot/System.map > Loaded 15061 symbols from /boot/System.map. > Symbols match kernel version 2.4.1. > Error opening /dev/kmem > Error adding kernel module table entry. > Linux version 2.4.1-pre8 (root@coredump) (gcc version 2.95.2 19991024 > (release)) #1 Wed Jan 17 16:52:06 EST 2001) > BIOS-provided physical RAM map: > BIOS-e820: 000000000009fc00 @ 0000000000000000 (usable) > BIOS-e820: 0000000000000400 @ 000000000009fc00 (reserved) > BIOS-e820: 0000000000020000 @ 00000000000e0000 (reserved) > BIOS-e820: 0000000003f00000 @ 0000000000100000 (usable) > BIOS-e820: 0000000000001000 @ 00000000fec00000 (reserved) > BIOS-e820: 0000000000001000 @ 00000000fee00000 (reserved) > BIOS-e820: 0000000000020000 @ 00000000fffe0000 (reserved) > On node 0 totalpages: 16384 > zone(0): 4096 pages. > zone(1): 12288 pages. > zone(2): 0 pages. > Kernel command line: BOOT_IMAGE=newlinux ro root=301 hdc=scsi > ide_setup: hdc=scsi > Initializing CPU#0 > Detected 199.433 MHz processor. > Console: colour VGA+ 80x25 > Calibrating delay loop... 398.13 BogoMIPS > Memory: 61976k/65536k available (1122k kernel code, 3172k reserved, 400k > data, 220k init, 0k highmem) > Dentry-cache hash table entries: 8192 (order: 4, 65536 bytes) > Buffer-cache hash table entries: 4096 (order: 2, 16384 bytes) > Page-cache hash table entries: 16384 (order: 4, 65536 bytes) > Inode-cache hash table entries: 4096 (order: 3, 32768 bytes) > CPU: Before vendor init, caps: 000001bf 00000000 00000000, vendor = 0 > Intel Pentium with F0 0F bug - workaround enabled. > CPU: After vendor init, caps: 000001bf 00000000 00000000 00000000 > CPU: After generic, caps: 000001bf 00000000 00000000 00000000 > CPU: Common caps: 000001bf 00000000 00000000 00000000 > CPU: Intel Pentium 75 - 200 stepping 0c > Checking 'hlt' instruction... OK. > POSIX conformance testing by UNIFIX > PCI: PCI BIOS revision 2.10 entry at 0xfdb91, last bus=0 > PCI: Using configuration type 1 > PCI: Probing PCI hardware > PCI: Cannot allocate resource region 0 of device 00:09.0 > got res[10000000:10ffffff] for resource 0 of ATI Technologies Inc 3D > Rage I/II 215GT [Mach64 GT] > Limiting direct PCI/PCI transfers. > Activating ISA DMA hang workarounds. > isapnp: Scanning for Pnp cards... > isapnp: Calling quirk for 01:00 > isapnp: SB audio device quirk - increasing port range > isapnp: Calling quirk for 01:02 > isapnp: AWE32 quirk - adding two ports > isapnp: Card 'Creative SB32 PnP' > isapnp: 1 Plug & Play card detected total > Linux NET4.0 for Linux 2.4 > Based upon Swansea University Computer Society NET3.039 > Initializing RT netlink socket > Starting kswapd v1.8 > parport0: PC-style at 0x378 [PCSPP,TRISTATE,EPP] > parport0: cpp_daisy: aa5500ff(98) > parport0: assign_addrs: aa5500ff(98) > parport0: Printer, HEWLETT-PACKARD DESKJET > pty: 256 Unix98 ptys configured > lp0: using parport0 (polling). > block: queued sectors max/low 41104kB/30828kB, 128 slots per queue > Uniform Multi-Platform E-IDE driver Revision: 6.31 > ide: Assuming 33MHz system bus speed for PIO modes; override with > idebus=xx > PIIX3: IDE controller on PCI bus 00 dev 39 > PIIX3: chipset revision 0 > PIIX3: not 100%% native mode: will probe irqs later > ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:DMA > ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:pio, hdd:pio > hda: FUJITSU MPE3064AT, ATA DISK drive > hdb: WDC AC32500H, ATA DISK drive > hdc: YAMAHA CRW2100E, ATAPI CD/DVD-ROM drive > ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 > ide1 at 0x170-0x177,0x376 on irq 15 > hda: 12672450 sectors (6488 MB) w/512KiB Cache, CHS=788/255/63, (U)DMA > hdb: Disabling (U)DMA for WDC AC32500H > hdb: 4999680 sectors (2560 MB) w/128KiB Cache, CHS=620/128/63 > ide-cd: passing drive hdc to ide-scsi emulation. > Partition check: > hda: hda1 hda2 > hdb: hdb1 hdb2 > Floppy drive(s): fd0 is 1.44M > FDC 0 is a post-1991 82077 > Serial driver version 5.02 (2000-08-09) with MANY_PORTS SHARE_IRQ > SERIAL_PCI ISAPNP enabled > ttyS00 at 0x03f8 (irq = 4) is a 16550A > ttyS01 at 0x02f8 (irq = 3) is a 16550A > Real Time Clock Driver v1.10d > 3c59x.c:LK1.1.12 06 Jan 2000 Donald Becker and others. > http://www.scyld.com/network/vortex.html $Revision: 1.102.2.46 $ > See Documentation/networking/vortex.txt > eth0: 3Com PCI 3c900 Cyclone 10Mbps TPO at 0xe880, 00:50:da:80:b5:74, > IRQ 9 > product code 'WQ' rev 00.4 date 11-10-99 > 8K byte-wide RAM 5:3 Rx:Tx split, 10baseT interface. > Enabling bus-master transmits and whole-frame receives. > SCSI subsystem driver Revision: 1.00 > scsi0 : SCSI host adapter emulation for IDE ATAPI devices > Vendor: YAMAHA Model: CRW2100E Rev: 1.0H > Type: CD-ROM ANSI SCSI revision: 02 > Soundblaster audio driver Copyright (C) by Hannu Savolainen 1993-1996 > sb: Creative SB32 PnP detected > sb: ISAPnP reports 'Creative SB32 PnP' at i/o 0x220, irq 5, dma 1, 5 > <Sound Blaster 16 (4.13)> at 0x220 irq 5 dma 1,5 > <Sound Blaster 16> at 0x330 irq 5 dma 0,0 > sb: 1 Soundblaster PnP card(s) found. > ISAPnP reports AWE32 WaveTable at i/o 0x620 > <SoundBlaster EMU8000 (RAM0k)> > NET4: Linux TCP/IP 1.0 for NET4.0 > IP Protocols: ICMP, UDP, TCP > IP: routing cache hash table of 512 buckets, 4Kbytes > TCP: Hash tables configured (established 4096 bind 4096) > ip_tables: (c)2000 Netfilter core team > NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. > reiserfs: checking transaction log (device 03:01) ... > Using r5 hash to sort names > ReiserFS version 3.6.25 > VFS: Mounted root (reiserfs filesystem) readonly. > Freeing unused kernel memory: 220k freed > Adding Swap: 64252k swap-space (priority -1) > eth0: using default media 10baseT > > Shawn. > > - > To unsubscribe from this list: send the line "unsubscribe linux-kernel" in > the body of a message to [EMAIL PROTECTED] > Please read the FAQ at http://www.tux.org/lkml/ - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [EMAIL PROTECTED] Please read the FAQ at http://www.tux.org/lkml/
