Fixes the following W=1 kernel build warning(s): drivers/ata/pata_amd.c:179: warning: Excess function parameter 'adev' description in 'amd_fifo_setup' drivers/ata/pata_amd.c:331: warning: Function parameter or member 'link' not described in 'nv_pre_reset' drivers/ata/pata_amd.c:331: warning: Function parameter or member 'deadline' not described in 'nv_pre_reset' drivers/ata/pata_amd.c:331: warning: expecting prototype for nv_probe_init(). Prototype was for nv_pre_reset() instead
Cc: Jens Axboe <ax...@kernel.dk> Cc: linux-...@vger.kernel.org Signed-off-by: Lee Jones <lee.jo...@linaro.org> --- drivers/ata/pata_amd.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/ata/pata_amd.c b/drivers/ata/pata_amd.c index 987967f976cb2..75b830eb3c542 100644 --- a/drivers/ata/pata_amd.c +++ b/drivers/ata/pata_amd.c @@ -167,7 +167,6 @@ static int amd_cable_detect(struct ata_port *ap) /** * amd_fifo_setup - set the PIO FIFO for ATA/ATAPI * @ap: ATA interface - * @adev: ATA device * * Set the PCI fifo for this device according to the devices present * on the bus at this point in time. We need to turn the post write buffer @@ -321,7 +320,8 @@ static unsigned long nv_mode_filter(struct ata_device *dev, /** * nv_probe_init - cable detection - * @lin: ATA link + * @link: ATA link + * @deadline: deadline jiffies for the operation * * Perform cable detection. The BIOS stores this in PCI config * space for us. -- 2.25.1
