On Fri, Jan 29, 2021 at 5:37 PM Rafael J. Wysocki <raf...@kernel.org> wrote:
>
> On Fri, Jan 29, 2021 at 7:48 AM Calvin Johnson
> <calvin.john...@oss.nxp.com> wrote:
> >
> > On Thu, Jan 28, 2021 at 02:27:00PM +0100, Rafael J. Wysocki wrote:
> > > On Thu, Jan 28, 2021 at 2:12 PM Calvin Johnson
> > > <calvin.john...@oss.nxp.com> wrote:
> > > >
> > > > On Thu, Jan 28, 2021 at 01:00:40PM +0100, Rafael J. Wysocki wrote:
> > > > > On Thu, Jan 28, 2021 at 12:27 PM Calvin Johnson
> > > > > <calvin.john...@oss.nxp.com> wrote:
> > > > > >
> > > > > > Hi Rafael,
> > > > > >
> > > > > > Thanks for the review. I'll work on all the comments.
> > > > > >
> > > > > > On Fri, Jan 22, 2021 at 08:22:21PM +0100, Rafael J. Wysocki wrote:
> > > > > > > On Fri, Jan 22, 2021 at 4:43 PM Calvin Johnson
> > > > > > > <calvin.john...@oss.nxp.com> wrote:
> > > > > > > >
> > > > > > > > Introduce ACPI mechanism to get PHYs registered on a MDIO bus
> > > > > > > > and
> > > > > > > > provide them to be connected to MAC.
> > > > > > > >
> > > > > > > > Describe properties "phy-handle" and "phy-mode".
> > > > > > > >
> > > > > > > > Signed-off-by: Calvin Johnson <calvin.john...@oss.nxp.com>
> > > > > > > > ---
> > > > > > > >
> > > > > > > > Changes in v4:
> > > > > > > > - More cleanup
> > > > > > >
> > > > > > > This looks much better that the previous versions IMV, some nits
> > > > > > > below.
> > > > > > >
> > > > > > > > Changes in v3: None
> > > > > > > > Changes in v2:
> > > > > > > > - Updated with more description in document
> > > > > > > >
> > > > > > > > Documentation/firmware-guide/acpi/dsd/phy.rst | 129
> > > > > > > > ++++++++++++++++++
> > > > > > > > 1 file changed, 129 insertions(+)
> > > > > > > > create mode 100644
> > > > > > > > Documentation/firmware-guide/acpi/dsd/phy.rst
> > > > > > > >
> > > > > > > > diff --git a/Documentation/firmware-guide/acpi/dsd/phy.rst
> > > > > > > > b/Documentation/firmware-guide/acpi/dsd/phy.rst
> > > > > > > > new file mode 100644
> > > > > > > > index 000000000000..76fca994bc99
> > > > > > > > --- /dev/null
> > > > > > > > +++ b/Documentation/firmware-guide/acpi/dsd/phy.rst
> > > > > > > > @@ -0,0 +1,129 @@
> > > > > > > > +.. SPDX-License-Identifier: GPL-2.0
> > > > > > > > +
> > > > > > > > +=========================
> > > > > > > > +MDIO bus and PHYs in ACPI
> > > > > > > > +=========================
> > > > > > > > +
> > > > > > > > +The PHYs on an MDIO bus [1] are probed and registered using
> > > > > > > > +fwnode_mdiobus_register_phy().
> > > > > > >
> > > > > > > Empty line here, please.
> > > > > > >
> > > > > > > > +Later, for connecting these PHYs to MAC, the PHYs registered
> > > > > > > > on the
> > > > > > > > +MDIO bus have to be referenced.
> > > > > > > > +
> > > > > > > > +The UUID given below should be used as mentioned in the
> > > > > > > > "Device Properties
> > > > > > > > +UUID For _DSD" [2] document.
> > > > > > > > + - UUID: daffd814-6eba-4d8c-8a91-bc9bbf4aa301
> > > > > > >
> > > > > > > I would drop the above paragraph.
> > > > > > >
> > > > > > > > +
> > > > > > > > +This document introduces two _DSD properties that are to be
> > > > > > > > used
> > > > > > > > +for PHYs on the MDIO bus.[3]
> > > > > > >
> > > > > > > I'd say "for connecting PHYs on the MDIO bus [3] to the MAC
> > > > > > > layer."
> > > > > > > above and add the following here:
> > > > > > >
> > > > > > > "These properties are defined in accordance with the "Device
> > > > > > > Properties UUID For _DSD" [2] document and the
> > > > > > > daffd814-6eba-4d8c-8a91-bc9bbf4aa301 UUID must be used in the
> > > > > > > Device
> > > > > > > Data Descriptors containing them."
> > > > > > >
> > > > > > > > +
> > > > > > > > +phy-handle
> > > > > > > > +----------
> > > > > > > > +For each MAC node, a device property "phy-handle" is used to
> > > > > > > > reference
> > > > > > > > +the PHY that is registered on an MDIO bus. This is mandatory
> > > > > > > > for
> > > > > > > > +network interfaces that have PHYs connected to MAC via MDIO
> > > > > > > > bus.
> > > > > > > > +
> > > > > > > > +During the MDIO bus driver initialization, PHYs on this bus
> > > > > > > > are probed
> > > > > > > > +using the _ADR object as shown below and are registered on the
> > > > > > > > MDIO bus.
> > > > > > >
> > > > > > > Do you want to mention the "reg" property here? I think it would
> > > > > > > be
> > > > > > > useful to do that.
> > > > > >
> > > > > > No. I think we should adhere to _ADR in MDIO case. The "reg"
> > > > > > property for ACPI
> > > > > > may be useful for other use cases that Andy is aware of.
> > > > >
> > > > > The code should reflect this, then. I mean it sounds like you want to
> > > > > check the "reg" property only if this is a non-ACPI node.
> > > >
> > > > Right. For MDIO case, that is what is required.
> > > > "reg" for DT and "_ADR" for ACPI.
> > > >
> > > > However, Andy pointed out [1] that ACPI nodes can also hold reg
> > > > property and
> > > > therefore, fwnode_get_id() need to be capable to handling that
> > > > situation as
> > > > well.
> > >
> > > No, please don't confuse those two things.
> > >
> > > Yes, ACPI nodes can also hold a "reg" property, but the meaning of it
> > > depends on the binding which is exactly my point: _ADR is not a
> > > fallback replacement for "reg" in general and it is not so for MDIO
> > > too. The new function as proposed doesn't match the MDIO requirements
> > > and so it should not be used for MDIO.
> > >
> > > For MDIO, the exact flow mentioned above needs to be implemented (and
> > > if someone wants to use it for their use case too, fine).
> > >
> > > Otherwise the code wouldn't match the documentation.
> >
> > In that case, is this good?
>
> It would work, but I would introduce a wrapper around the _ADR
> evaluation, something like:
>
> int acpi_get_local_address(acpi_handle handle, u32 *addr)
> {
> unsigned long long adr;
> acpi_status status;
>
> status = acpi_evaluate_integer(handle, METHOD_NAME__ADR, NULL, &adr);
> if (ACPI_FAILURE(status))
> return -ENODATA;
>
> *addr = (u32)adr;
> return 0;
> }
>
> in drivers/acpi/utils.c and add a static inline stub always returning
> -ENODEV for it for !CONFIG_ACPI.
>
> > /**
> > * fwnode_get_local_addr - Get the local address of fwnode.
> > * @fwnode: firmware node
> > * @addr: addr value contained in the fwnode
> > *
> > * For DT, retrieve the value of the "reg" property for @fwnode.
> > *
> > * In the ACPI case, evaluate the _ADR object located under the
> > * given node, if present, and provide its return value to the
> > * caller.
> > *
> > * Return 0 on success or a negative error code.
> > */
> > int fwnode_get_local_addr(struct fwnode_handle *fwnode, u32 *addr)
> > {
> > int ret;
> >
> > if (is_of_node(fwnode))
> > return of_property_read_u32(to_of_node(fwnode), "reg",
> > addr);
>
> So you can write the below as
>
> if (is_acpi_device_node(fwnode))
> return acpi_get_local_address(ACPI_HANDLE_FWNODE(fwnode), addr);
>
> return -EINVAL;
>
> and this should compile just fine if CONFIG_ACPI is unset, so you can
> avoid the whole #ifdeffery in this function.
BTW, you may not need the fwnode_get_local_addr() at all then, just
evaluate either the "reg" property for OF or acpi_get_local_address()
for ACPI in the "caller" code directly. A common helper doing this can
be added later.
> >
> > #ifdef CONFIG_ACPI
> > if (is_acpi_node(fwnode)) {
> > unsigned long long adr;
> > acpi_status status;
> >
> > status = acpi_evaluate_integer(ACPI_HANDLE_FWNODE(fwnode),
> > METHOD_NAME__ADR, NULL,
> > &adr);
> > if (ACPI_FAILURE(status))
> > return -ENODATA;
> > *addr = (u32)adr;
> > return 0;
> > }
> > #endif
> > return -EINVAL;
> > }
