On Fri, 29 Jan 2021 18:21:22 -0800, [email protected] wrote:
> From: "C, Udhayakumar" <[email protected]>
>
> Add hddl device management documentation
>
> The HDDL client driver acts as an software RTC to sync with network time.
> It abstracts xlink protocol to communicate with remote IA host.
> This driver exports the details about sensors available in the platform
> to remote IA host as xlink packets.
> This driver also handles device connect/disconnect events and identifies
> board id and soc id using gpio's based on platform configuration.
>
> Cc: Rob Herring <[email protected]>
> Cc: [email protected]
> Signed-off-by: C Udhayakumar <[email protected]>
> Signed-off-by: Mark Gross <[email protected]>
> ---
> .../bindings/misc/intel,hddl-client.yaml | 114 ++++++++++++++++++
> 1 file changed, 114 insertions(+)
> create mode 100644
> Documentation/devicetree/bindings/misc/intel,hddl-client.yaml
>
My bot found errors running 'make dt_binding_check' on your patch:
yamllint warnings/errors:
dtschema/dtc warnings/errors:
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/misc/intel,hddl-client.example.dt.yaml:
example-0: hddl@20320000:reg:0: [0, 540147712, 0, 2048] is too long
From schema:
/usr/local/lib/python3.8/dist-packages/dtschema/schemas/reg.yaml
See https://patchwork.ozlabs.org/patch/1433603
This check can fail if there are any dependencies. The base for a patch
series is generally the most recent rc1.
If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:
pip3 install dtschema --upgrade
Please check and re-submit.
