Fixes the following W=1 kernel build warning(s):
drivers/ata/pata_pdc2027x.c:209: warning: expecting prototype for
pdc2027x_pata_cable_detect(). Prototype was for pdc2027x_cable_detect() instead
drivers/ata/pata_pdc2027x.c:262: warning: expecting prototype for
pdc2720x_mode_filter(). Prototype was for pdc2027x_mode_filter() instead
drivers/ata/pata_pdc2027x.c:513: warning: Function parameter or member
'board_idx' not described in 'pdc_adjust_pll'
drivers/ata/pata_pdc2027x.c:513: warning: expecting prototype for
adjust_pll(). Prototype was for pdc_adjust_pll() instead
drivers/ata/pata_pdc2027x.c:599: warning: expecting prototype for
detect_pll_input_clock(). Prototype was for pdc_detect_pll_input_clock() instead
Cc: Jens Axboe <ax...@kernel.dk>
Cc: Albert Lee <alber...@tw.ibm.com>
Cc: Andre Hedrick <an...@linux-ide.org>
Cc: Frank Tiernan <fra...@promise.com>
Cc: linux-...@vger.kernel.org
Signed-off-by: Lee Jones <lee.jo...@linaro.org>
---
drivers/ata/pata_pdc2027x.c | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/drivers/ata/pata_pdc2027x.c b/drivers/ata/pata_pdc2027x.c
index de834fbb6dfe6..effc1a09444de 100644
--- a/drivers/ata/pata_pdc2027x.c
+++ b/drivers/ata/pata_pdc2027x.c
@@ -196,7 +196,7 @@ static inline void __iomem *dev_mmio(struct ata_port *ap,
struct ata_device *ade
}
/**
- * pdc2027x_pata_cable_detect - Probe host controller cable detect info
+ * pdc2027x_cable_detect - Probe host controller cable detect info
* @ap: Port for which cable detect info is desired
*
* Read 80c cable indicator from Promise extended register.
@@ -251,7 +251,7 @@ static int pdc2027x_prereset(struct ata_link *link,
unsigned long deadline)
}
/**
- * pdc2720x_mode_filter - mode selection filter
+ * pdc2027x_mode_filter - mode selection filter
* @adev: ATA device
* @mask: list of modes proposed
*
@@ -503,11 +503,11 @@ static long pdc_read_counter(struct ata_host *host)
}
/**
- * adjust_pll - Adjust the PLL input clock in Hz.
+ * pdc_adjust_pll - Adjust the PLL input clock in Hz.
*
- * @pdc_controller: controller specific information
* @host: target ATA host
* @pll_clock: The input of PLL in HZ
+ * @board_idx: board identifier
*/
static void pdc_adjust_pll(struct ata_host *host, long pll_clock, unsigned int
board_idx)
{
@@ -590,7 +590,7 @@ static void pdc_adjust_pll(struct ata_host *host, long
pll_clock, unsigned int b
}
/**
- * detect_pll_input_clock - Detect the PLL input clock in Hz.
+ * pdc_detect_pll_input_clock - Detect the PLL input clock in Hz.
* @host: target ATA host
* Ex. 16949000 on 33MHz PCI bus for pdc20275.
* Half of the PCI clock.
--
2.25.1
