Configure USB switches when partner is USB Communication capable.
The is enabled USB data communication over D+/D- pins.

Signed-off-by: Badhri Jagan Sridharan <bad...@google.com>
---
 drivers/usb/typec/tcpm/tcpci_maxim.c | 19 +++++++++++++++++++
 1 file changed, 19 insertions(+)

diff --git a/drivers/usb/typec/tcpm/tcpci_maxim.c 
b/drivers/usb/typec/tcpm/tcpci_maxim.c
index f1674a611033..041a1c393594 100644
--- a/drivers/usb/typec/tcpm/tcpci_maxim.c
+++ b/drivers/usb/typec/tcpm/tcpci_maxim.c
@@ -19,6 +19,9 @@
 #define PD_ACTIVITY_TIMEOUT_MS                         10000
 
 #define TCPC_VENDOR_ALERT                              0x80
+#define TCPC_VENDOR_USBSW_CTRL                         0x93
+#define TCPC_VENDOR_USBSW_CTRL_ENABLE_USB_DATA         0x9
+#define TCPC_VENDOR_USBSW_CTRL_DISABLE_USB_DATA                0
 
 #define TCPC_RECEIVE_BUFFER_COUNT_OFFSET               0
 #define TCPC_RECEIVE_BUFFER_FRAME_TYPE_OFFSET          1
@@ -274,6 +277,21 @@ static void process_tx(struct max_tcpci_chip *chip, u16 
status)
                max_tcpci_init_regs(chip);
 }
 
+/* Enable USB switches when partner is USB communications capable */
+static void max_tcpci_set_partner_usb_comm_capable(struct tcpci *tcpci, struct 
tcpci_data *data,
+                                                  bool capable)
+{
+       struct max_tcpci_chip *chip = tdata_to_max_tcpci(data);
+       int ret;
+
+       ret = max_tcpci_write8(chip, TCPC_VENDOR_USBSW_CTRL, capable ?
+                              TCPC_VENDOR_USBSW_CTRL_ENABLE_USB_DATA :
+                              TCPC_VENDOR_USBSW_CTRL_DISABLE_USB_DATA);
+
+       if (ret < 0)
+               dev_err(chip->dev, "Failed to enable USB switches");
+}
+
 static irqreturn_t _max_tcpci_irq(struct max_tcpci_chip *chip, u16 status)
 {
        u16 mask;
@@ -453,6 +471,7 @@ static int max_tcpci_probe(struct i2c_client *client, const 
struct i2c_device_id
        chip->data.frs_sourcing_vbus = max_tcpci_frs_sourcing_vbus;
        chip->data.auto_discharge_disconnect = true;
        chip->data.vbus_vsafe0v = true;
+       chip->data.set_partner_usb_comm_capable = 
max_tcpci_set_partner_usb_comm_capable;
 
        max_tcpci_init_regs(chip);
        chip->tcpci = tcpci_register_port(chip->dev, &chip->data);
-- 
2.30.0.365.g02bc693789-goog

Reply via email to