On 2.2.2021 20.41, Greg Kroah-Hartman wrote:
> On Mon, Feb 01, 2021 at 04:08:03PM +0100, Pali Rohár wrote:
>> Older ATF does not provide SMC call for USB 3.0 phy power on functionality
>> and therefore initialization of xhci-hcd is failing when older version of
>> ATF is used. In this case phy_power_on() function returns -EOPNOTSUPP.
>>
>> [    3.108467] mvebu-a3700-comphy d0018300.phy: unsupported SMC call, try 
>> updating your firmware
>> [    3.117250] phy phy-d0018300.phy.0: phy poweron failed --> -95
>> [    3.123465] xhci-hcd: probe of d0058000.usb failed with error -95
>>
>> This patch introduces a new plat_setup callback for xhci platform drivers
>> which is called prior calling usb_add_hcd() function. This function at its
>> beginning skips PHY init if hcd->skip_phy_initialization is set.
>>
>> Current init_quirk callback for xhci platform drivers is called from
>> xhci_plat_setup() function which is called after chip reset completes.
>> It happens in the middle of the usb_add_hcd() function and therefore this
>> callback cannot be used for setting if PHY init should be skipped or not.
>>
>> For Armada 3720 this patch introduce a new xhci_mvebu_a3700_plat_setup()
>> function configured as a xhci platform plat_setup callback. This new
>> function calls phy_power_on() and in case it returns -EOPNOTSUPP then
>> XHCI_SKIP_PHY_INIT quirk is set to instruct xhci-plat to skip PHY
>> initialization.
>>
>> This patch fixes above failure by ignoring 'not supported' error in
>> xhci-hcd driver. In this case it is expected that phy is already power on.
>>
>> It fixes initialization of xhci-hcd on Espressobin boards where is older
>> Marvell's Arm Trusted Firmware without SMC call for USB 3.0 phy power.
>>
>> This is regression introduced in commit bd3d25b07342 ("arm64: dts: marvell:
>> armada-37xx: link USB hosts with their PHYs") where USB 3.0 phy was defined
>> and therefore xhci-hcd on Espressobin with older ATF started failing.
>>
>> Signed-off-by: Pali Rohár <p...@kernel.org>
>> Tested-by: Tomasz Maciej Nowak <tmn...@gmail.com>
>> Fixes: bd3d25b07342 ("arm64: dts: marvell: armada-37xx: link USB hosts with 
>> their PHYs")
>> Cc: <sta...@vger.kernel.org> # 5.1+: ea17a0f153af: phy: marvell: comphy: 
>> Convert internal SMCC firmware return codes to errno
>> Cc: <sta...@vger.kernel.org> # 5.1+: f768e718911e: usb: host: xhci-plat: add 
>> priv quirk for skip PHY initialization
> 
> 
> Mathias, any objection for me taking this now to get into 5.11-final?
> 
> thanks,
> 
> greg k-h
> 

No objections, looks good to me.

Acked-by: Mathias Nyman <mathias.ny...@linux.intel.com>

Reply via email to