On Fri, Feb 05, 2021 at 05:47:22PM -0600, Li Yang wrote:
> Convert the txt binding to yaml format and add description. Also
> updated the recommended node name to ifc-bus to align with the
> simple-bus node name requirements.
>
> Signed-off-by: Li Yang <leoyang...@nxp.com>
> ---
> .../bindings/memory-controllers/fsl/ifc.txt | 82 ----------
> .../bindings/memory-controllers/fsl/ifc.yaml | 140 ++++++++++++++++++
> 2 files changed, 140 insertions(+), 82 deletions(-)
> delete mode 100644
> Documentation/devicetree/bindings/memory-controllers/fsl/ifc.txt
> create mode 100644
> Documentation/devicetree/bindings/memory-controllers/fsl/ifc.yaml
>
> diff --git a/Documentation/devicetree/bindings/memory-controllers/fsl/ifc.txt
> b/Documentation/devicetree/bindings/memory-controllers/fsl/ifc.txt
> deleted file mode 100644
> index 89427b018ba7..000000000000
> --- a/Documentation/devicetree/bindings/memory-controllers/fsl/ifc.txt
> +++ /dev/null
> @@ -1,82 +0,0 @@
> -Integrated Flash Controller
> -
> -Properties:
> -- name : Should be ifc
> -- compatible : should contain "fsl,ifc". The version of the integrated
> - flash controller can be found in the IFC_REV register at
> - offset zero.
> -
> -- #address-cells : Should be either two or three. The first cell is the
> - chipselect number, and the remaining cells are the
> - offset into the chipselect.
> -- #size-cells : Either one or two, depending on how large each chipselect
> - can be.
> -- reg : Offset and length of the register set for the device
> -- interrupts: IFC may have one or two interrupts. If two interrupt
> - specifiers are present, the first is the "common"
> - interrupt (CM_EVTER_STAT), and the second is the NAND
> - interrupt (NAND_EVTER_STAT). If there is only one,
> - that interrupt reports both types of event.
> -
> -- little-endian : If this property is absent, the big-endian mode will
> - be in use as default for registers.
> -
> -- ranges : Each range corresponds to a single chipselect, and covers
> - the entire access window as configured.
> -
> -Child device nodes describe the devices connected to IFC such as NOR (e.g.
> -cfi-flash) and NAND (fsl,ifc-nand). There might be board specific devices
> -like FPGAs, CPLDs, etc.
> -
> -Example:
> -
> - ifc@ffe1e000 {
> - compatible = "fsl,ifc", "simple-bus";
> - #address-cells = <2>;
> - #size-cells = <1>;
> - reg = <0x0 0xffe1e000 0 0x2000>;
> - interrupts = <16 2 19 2>;
> - little-endian;
> -
> - /* NOR, NAND Flashes and CPLD on board */
> - ranges = <0x0 0x0 0x0 0xee000000 0x02000000
> - 0x1 0x0 0x0 0xffa00000 0x00010000
> - 0x3 0x0 0x0 0xffb00000 0x00020000>;
> -
> - flash@0,0 {
> - #address-cells = <1>;
> - #size-cells = <1>;
> - compatible = "cfi-flash";
> - reg = <0x0 0x0 0x2000000>;
> - bank-width = <2>;
> - device-width = <1>;
> -
> - partition@0 {
> - /* 32MB for user data */
> - reg = <0x0 0x02000000>;
> - label = "NOR Data";
> - };
> - };
> -
> - flash@1,0 {
> - #address-cells = <1>;
> - #size-cells = <1>;
> - compatible = "fsl,ifc-nand";
> - reg = <0x1 0x0 0x10000>;
> -
> - partition@0 {
> - /* This location must not be altered */
> - /* 1MB for u-boot Bootloader Image */
> - reg = <0x0 0x00100000>;
> - label = "NAND U-Boot Image";
> - read-only;
> - };
> - };
> -
> - cpld@3,0 {
> - #address-cells = <1>;
> - #size-cells = <1>;
> - compatible = "fsl,p1010rdb-cpld";
> - reg = <0x3 0x0 0x000001f>;
> - };
> - };
> diff --git
> a/Documentation/devicetree/bindings/memory-controllers/fsl/ifc.yaml
> b/Documentation/devicetree/bindings/memory-controllers/fsl/ifc.yaml
> new file mode 100644
> index 000000000000..d37cae66b027
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/memory-controllers/fsl/ifc.yaml
> @@ -0,0 +1,140 @@
> +# SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/memory-controllers/fsl/ifc.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: FSL/NXP Integrated Flash Controller
> +
> +maintainers:
> + - Li Yang <leoyang...@nxp.com>
> +
> +description: |
> + NXP's integrated flash controller (IFC) is an advanced version of the
> + enhanced local bus controller which includes similar programming and signal
> + interfaces with an extended feature set. The IFC provides access to
> multiple
> + external memory types, such as NAND flash (SLC and MLC), NOR flash, EPROM,
> + SRAM and other memories where address and data are shared on a bus.
> +
> +allOf:
> + - $ref: /schemas/simple-bus.yaml#
> +
> +properties:
> + $nodename:
> + pattern: "^ifc-bus@[0-9a-f]+$"
Just "bus". The node name should be generic, represent generic class of
a device. The class is a bus.
> +
> + compatible:
> + contains:
> + const: fsl,ifc
I think you should list all compatibles, to be specific. "contains"
allow adding any arbitrary compatible.
> +
> + "#address-cells":
> + enum: [2, 3]
> + description: |
> + Should be either two or three. The first cell is the chipselect
> + number, and the remaining cells are the offset into the chipselect.
> +
> + "#size-cells":
> + enum: [1, 2]
> + description: |
> + Either one or two, depending on how large each chipselect can be.
> +
> + reg:
> + maxItems: 1
> + description: |
> + Offset and length of the register set for the device.
Wrong indentation.
> +
> + interrupts:
> + minItems: 1
> + maxItems: 2
> + description: |
> + IFC may have one or two interrupts. If two interrupt specifiers are
> + present, the first is the "common" interrupt (CM_EVTER_STAT), and the
> + second is the NAND interrupt (NAND_EVTER_STAT). If there is only one,
> + that interrupt reports both types of event.
> +
> + little-endian:
> + description: |
> + If this property is absent, the big-endian mode will be in use as
> default
> + for registers.
type: boolean
> +
> + ranges:
> + description: |
> + Each range corresponds to a single chipselect, and covers the entire
> + access window as configured.
> +
> +patternProperties:
Wrong indentation.
Best regards,
Krzysztof
