On 21-02-10 15:07:59, Jonathan Cameron wrote:
> On Wed, 10 Feb 2021 13:32:52 +0000
> Jonathan Cameron <jonathan.came...@huawei.com> wrote:
>
> > On Tue, 9 Feb 2021 16:02:53 -0800
> > Ben Widawsky <ben.widaw...@intel.com> wrote:
> >
> > > Provide enough functionality to utilize the mailbox of a memory device.
> > > The mailbox is used to interact with the firmware running on the memory
> > > device. The flow is proven with one implemented command, "identify".
> > > Because the class code has already told the driver this is a memory
> > > device and the identify command is mandatory.
> > >
> > > CXL devices contain an array of capabilities that describe the
> > > interactions software can have with the device or firmware running on
> > > the device. A CXL compliant device must implement the device status and
> > > the mailbox capability. Additionally, a CXL compliant memory device must
> > > implement the memory device capability. Each of the capabilities can
> > > [will] provide an offset within the MMIO region for interacting with the
> > > CXL device.
> > >
> > > The capabilities tell the driver how to find and map the register space
> > > for CXL Memory Devices. The registers are required to utilize the CXL
> > > spec defined mailbox interface. The spec outlines two mailboxes, primary
> > > and secondary. The secondary mailbox is earmarked for system firmware,
> > > and not handled in this driver.
> > >
> > > Primary mailboxes are capable of generating an interrupt when submitting
> > > a background command. That implementation is saved for a later time.
> > >
> > > Link: https://www.computeexpresslink.org/download-the-specification
> > > Signed-off-by: Ben Widawsky <ben.widaw...@intel.com>
> > > Reviewed-by: Dan Williams <dan.j.willi...@intel.com>
> >
> > Hi Ben,
> >
> >
> > > +/**
> > > + * cxl_mem_mbox_send_cmd() - Send a mailbox command to a memory device.
> > > + * @cxlm: The CXL memory device to communicate with.
> > > + * @mbox_cmd: Command to send to the memory device.
> > > + *
> > > + * Context: Any context. Expects mbox_lock to be held.
> > > + * Return: -ETIMEDOUT if timeout occurred waiting for completion. 0 on
> > > success.
> > > + * Caller should check the return code in @mbox_cmd to make sure
> > > it
> > > + * succeeded.
> >
> > cxl_xfer_log() doesn't check mbox_cmd->return_code and for my test it
> > currently
> > enters an infinite loop as a result.
I meant to fix that.
> >
> > I haven't checked other paths, but to my mind it is not a good idea to
> > require
> > two levels of error checking - the example here proves how easy it is to
> > forget
> > one.
Demonstrably, you're correct. I think it would be good to have a kernel only
mbox command that does the error checking though. Let me type something up and
see how it looks.
> >
> > Now all I have to do is figure out why I'm getting an error in the first
> > place!
>
> For reference this seems to be our old issue of arm64 memcpy_fromio() only
> doing 8 byte
> or 1 byte copies. The hack in QEMU to allow that to work, doesn't work.
> Result is that 1 byte reads replicate across the register
> (in this case instead of 0000001c I get 1c1c1c1c)
>
> For these particular registers, we are covered by the rules in 8.2 which says
> that
> a 1, 2, 4, 8 aligned reads of 64 bit registers etc are fine.
>
> So we should not have to care. This isn't true for the component registers
> where
> we need to guarantee 4 or 8 byte reads only.
>
> For this particular issue the mailbox_read_reg() function in the QEMU code
> needs to handle the size 1 case and set min_access_size = 1 for
> mailbox_ops. Logically it should also handle the 2 byte case I think,
> but I'm not hitting that.
>
> Jonathan
I think the latest QEMU patches should do the right thing (I have a v4 branch if
you want to try it). If it doesn't, it'd be worth debugging. The memory
accessors should split up or combine the reads/writes to whatever the emulation
supports (4 or 8 only in this case).
We can move this discussion to the QEMU list if it's not just a simple bug on my
part.
>
> >
> > Jonathan
> >
> >
> >
> > > + *
> > > + * This is a generic form of the CXL mailbox send command, thus the only
> > > I/O
> > > + * operations used are cxl_read_mbox_reg(). Memory devices, and perhaps
> > > other
> > > + * types of CXL devices may have further information available upon error
> > > + * conditions.
> > > + *
> > > + * The CXL spec allows for up to two mailboxes. The intention is for the
> > > primary
> > > + * mailbox to be OS controlled and the secondary mailbox to be used by
> > > system
> > > + * firmware. This allows the OS and firmware to communicate with the
> > > device and
> > > + * not need to coordinate with each other. The driver only uses the
> > > primary
> > > + * mailbox.
> > > + */
> > > +static int cxl_mem_mbox_send_cmd(struct cxl_mem *cxlm,
> > > + struct mbox_cmd *mbox_cmd)
> > > +{
> > > + void __iomem *payload = cxlm->mbox_regs + CXLDEV_MBOX_PAYLOAD_OFFSET;
> > > + u64 cmd_reg, status_reg;
> > > + size_t out_len;
> > > + int rc;
> > > +
> > > + lockdep_assert_held(&cxlm->mbox_mutex);
> > > +
> > > + /*
> > > + * Here are the steps from 8.2.8.4 of the CXL 2.0 spec.
> > > + * 1. Caller reads MB Control Register to verify doorbell is clear
> > > + * 2. Caller writes Command Register
> > > + * 3. Caller writes Command Payload Registers if input payload is
> > > non-empty
> > > + * 4. Caller writes MB Control Register to set doorbell
> > > + * 5. Caller either polls for doorbell to be clear or waits for
> > > interrupt if configured
> > > + * 6. Caller reads MB Status Register to fetch Return code
> > > + * 7. If command successful, Caller reads Command Register to get
> > > Payload Length
> > > + * 8. If output payload is non-empty, host reads Command Payload
> > > Registers
> > > + *
> > > + * Hardware is free to do whatever it wants before the doorbell is rung,
> > > + * and isn't allowed to change anything after it clears the doorbell. As
> > > + * such, steps 2 and 3 can happen in any order, and steps 6, 7, 8 can
> > > + * also happen in any order (though some orders might not make sense).
> > > + */
> > > +
> > > + /* #1 */
> > > + if (cxl_doorbell_busy(cxlm)) {
> > > + dev_err_ratelimited(&cxlm->pdev->dev,
> > > + "Mailbox re-busy after acquiring\n");
> > > + return -EBUSY;
> > > + }
> > > +
> > > + cmd_reg = FIELD_PREP(CXLDEV_MBOX_CMD_COMMAND_OPCODE_MASK,
> > > + mbox_cmd->opcode);
> > > + if (mbox_cmd->size_in) {
> > > + if (WARN_ON(!mbox_cmd->payload_in))
> > > + return -EINVAL;
> > > +
> > > + cmd_reg |= FIELD_PREP(CXLDEV_MBOX_CMD_PAYLOAD_LENGTH_MASK,
> > > + mbox_cmd->size_in);
> > > + memcpy_toio(payload, mbox_cmd->payload_in, mbox_cmd->size_in);
> > > + }
> > > +
> > > + /* #2, #3 */
> > > + writeq(cmd_reg, cxlm->mbox_regs + CXLDEV_MBOX_CMD_OFFSET);
> > > +
> > > + /* #4 */
> > > + dev_dbg(&cxlm->pdev->dev, "Sending command\n");
> > > + writel(CXLDEV_MBOX_CTRL_DOORBELL,
> > > + cxlm->mbox_regs + CXLDEV_MBOX_CTRL_OFFSET);
> > > +
> > > + /* #5 */
> > > + rc = cxl_mem_wait_for_doorbell(cxlm);
> > > + if (rc == -ETIMEDOUT) {
> > > + cxl_mem_mbox_timeout(cxlm, mbox_cmd);
> > > + return rc;
> > > + }
> > > +
> > > + /* #6 */
> > > + status_reg = readq(cxlm->mbox_regs + CXLDEV_MBOX_STATUS_OFFSET);
> > > + mbox_cmd->return_code =
> > > + FIELD_GET(CXLDEV_MBOX_STATUS_RET_CODE_MASK, status_reg);
> > > +
> > > + if (mbox_cmd->return_code != 0) {
> > > + dev_dbg(&cxlm->pdev->dev, "Mailbox operation had an error\n");
> > > + return 0;
> >
> > I'd return some sort of error in this path. Otherwise the sort of missing
> > handling I mention above is too easy to hit.
> >
> > > + }
> > > +
> > > + /* #7 */
> > > + cmd_reg = readq(cxlm->mbox_regs + CXLDEV_MBOX_CMD_OFFSET);
> > > + out_len = FIELD_GET(CXLDEV_MBOX_CMD_PAYLOAD_LENGTH_MASK, cmd_reg);
> > > +
> > > + /* #8 */
> > > + if (out_len && mbox_cmd->payload_out)
> > > + memcpy_fromio(mbox_cmd->payload_out, payload, out_len);
> > > +
> > > + mbox_cmd->size_out = out_len;
> > > +
> > > + return 0;
> > > +}
> > > +
> > > +/**
> > > + * cxl_mem_mbox_get() - Acquire exclusive access to the mailbox.
> > > + * @cxlm: The memory device to gain access to.
> > > + *
> > > + * Context: Any context. Takes the mbox_lock.
> > > + * Return: 0 if exclusive access was acquired.
> > > + */
> > > +static int cxl_mem_mbox_get(struct cxl_mem *cxlm)
> > > +{
> > > + struct device *dev = &cxlm->pdev->dev;
> > > + int rc = -EBUSY;
> > > + u64 md_status;
> > > +
> > > + mutex_lock_io(&cxlm->mbox_mutex);
> > > +
> > > + /*
> > > + * XXX: There is some amount of ambiguity in the 2.0 version of the spec
> > > + * around the mailbox interface ready (8.2.8.5.1.1). The purpose of the
> > > + * bit is to allow firmware running on the device to notify the driver
> > > + * that it's ready to receive commands. It is unclear if the bit needs
> > > + * to be read for each transaction mailbox, ie. the firmware can switch
> > > + * it on and off as needed. Second, there is no defined timeout for
> > > + * mailbox ready, like there is for the doorbell interface.
> > > + *
> > > + * Assumptions:
> > > + * 1. The firmware might toggle the Mailbox Interface Ready bit, check
> > > + * it for every command.
> > > + *
> > > + * 2. If the doorbell is clear, the firmware should have first set the
> > > + * Mailbox Interface Ready bit. Therefore, waiting for the doorbell
> > > + * to be ready is sufficient.
> > > + */
> > > + rc = cxl_mem_wait_for_doorbell(cxlm);
> > > + if (rc) {
> > > + dev_warn(dev, "Mailbox interface not ready\n");
> > > + goto out;
> > > + }
> > > +
> > > + md_status = readq(cxlm->memdev_regs + CXLMDEV_STATUS_OFFSET);
> > > + if (!(md_status & CXLMDEV_MBOX_IF_READY && CXLMDEV_READY(md_status))) {
> > > + dev_err(dev,
> > > + "mbox: reported doorbell ready, but not mbox ready\n");
> > > + goto out;
> > > + }
> > > +
> > > + /*
> > > + * Hardware shouldn't allow a ready status but also have failure bits
> > > + * set. Spit out an error, this should be a bug report
> > > + */
> > > + rc = -EFAULT;
> > > + if (md_status & CXLMDEV_DEV_FATAL) {
> > > + dev_err(dev, "mbox: reported ready, but fatal\n");
> > > + goto out;
> > > + }
> > > + if (md_status & CXLMDEV_FW_HALT) {
> > > + dev_err(dev, "mbox: reported ready, but halted\n");
> > > + goto out;
> > > + }
> > > + if (CXLMDEV_RESET_NEEDED(md_status)) {
> > > + dev_err(dev, "mbox: reported ready, but reset needed\n");
> > > + goto out;
> > > + }
> > > +
> > > + /* with lock held */
> > > + return 0;
> > > +
> > > +out:
> > > + mutex_unlock(&cxlm->mbox_mutex);
> > > + return rc;
> > > +}
> > > +
> > > +/**
> > > + * cxl_mem_mbox_put() - Release exclusive access to the mailbox.
> > > + * @cxlm: The CXL memory device to communicate with.
> > > + *
> > > + * Context: Any context. Expects mbox_lock to be held.
> > > + */
> > > +static void cxl_mem_mbox_put(struct cxl_mem *cxlm)
> > > +{
> > > + mutex_unlock(&cxlm->mbox_mutex);
> > > +}
> > > +
> > > +/**
> > > + * cxl_mem_setup_regs() - Setup necessary MMIO.
> > > + * @cxlm: The CXL memory device to communicate with.
> > > + *
> > > + * Return: 0 if all necessary registers mapped.
> > > + *
> > > + * A memory device is required by spec to implement a certain set of MMIO
> > > + * regions. The purpose of this function is to enumerate and map those
> > > + * registers.
> > > + */
> > > +static int cxl_mem_setup_regs(struct cxl_mem *cxlm)
> > > +{
> > > + struct device *dev = &cxlm->pdev->dev;
> > > + int cap, cap_count;
> > > + u64 cap_array;
> > > +
> > > + cap_array = readq(cxlm->regs + CXLDEV_CAP_ARRAY_OFFSET);
> > > + if (FIELD_GET(CXLDEV_CAP_ARRAY_ID_MASK, cap_array) !=
> > > + CXLDEV_CAP_ARRAY_CAP_ID)
> > > + return -ENODEV;
> > > +
> > > + cap_count = FIELD_GET(CXLDEV_CAP_ARRAY_COUNT_MASK, cap_array);
> > > +
> > > + for (cap = 1; cap <= cap_count; cap++) {
> > > + void __iomem *register_block;
> > > + u32 offset;
> > > + u16 cap_id;
> > > +
> > > + cap_id = readl(cxlm->regs + cap * 0x10) & 0xffff;
> > > + offset = readl(cxlm->regs + cap * 0x10 + 0x4);
> > > + register_block = cxlm->regs + offset;
> > > +
> > > + switch (cap_id) {
> > > + case CXLDEV_CAP_CAP_ID_DEVICE_STATUS:
> > > + dev_dbg(dev, "found Status capability (0x%x)\n",
> > > offset);
> > > + cxlm->status_regs = register_block;
> > > + break;
> > > + case CXLDEV_CAP_CAP_ID_PRIMARY_MAILBOX:
> > > + dev_dbg(dev, "found Mailbox capability (0x%x)\n",
> > > offset);
> > > + cxlm->mbox_regs = register_block;
> > > + break;
> > > + case CXLDEV_CAP_CAP_ID_SECONDARY_MAILBOX:
> > > + dev_dbg(dev, "found Secondary Mailbox capability
> > > (0x%x)\n", offset);
> > > + break;
> > > + case CXLDEV_CAP_CAP_ID_MEMDEV:
> > > + dev_dbg(dev, "found Memory Device capability (0x%x)\n",
> > > offset);
> > > + cxlm->memdev_regs = register_block;
> > > + break;
> > > + default:
> > > + dev_dbg(dev, "Unknown cap ID: %d (0x%x)\n", cap_id,
> > > offset);
> > > + break;
> > > + }
> > > + }
> > > +
> > > + if (!cxlm->status_regs || !cxlm->mbox_regs || !cxlm->memdev_regs) {
> > > + dev_err(dev, "registers not found: %s%s%s\n",
> > > + !cxlm->status_regs ? "status " : "",
> > > + !cxlm->mbox_regs ? "mbox " : "",
> > > + !cxlm->memdev_regs ? "memdev" : "");
> > > + return -ENXIO;
> > > + }
> > > +
> > > + return 0;
> > > +}
> > > +
> > > +static int cxl_mem_setup_mailbox(struct cxl_mem *cxlm)
> > > +{
> > > + const int cap = readl(cxlm->mbox_regs + CXLDEV_MBOX_CAPS_OFFSET);
> > > +
> > > + cxlm->payload_size =
> > > + 1 << FIELD_GET(CXLDEV_MBOX_CAP_PAYLOAD_SIZE_MASK, cap);
> > > +
> > > + /*
> > > + * CXL 2.0 8.2.8.4.3 Mailbox Capabilities Register
> > > + *
> > > + * If the size is too small, mandatory commands will not work and so
> > > + * there's no point in going forward. If the size is too large, there's
> > > + * no harm is soft limiting it.
> > > + */
> > > + cxlm->payload_size = min_t(size_t, cxlm->payload_size, SZ_1M);
> > > + if (cxlm->payload_size < 256) {
> > > + dev_err(&cxlm->pdev->dev, "Mailbox is too small (%zub)",
> > > + cxlm->payload_size);
> > > + return -ENXIO;
> > > + }
> > > +
> > > + dev_dbg(&cxlm->pdev->dev, "Mailbox payload sized %zu",
> > > + cxlm->payload_size);
> > > +
> > > + return 0;
> > > +}
> > > +
> > > +static struct cxl_mem *cxl_mem_create(struct pci_dev *pdev, u32 reg_lo,
> > > + u32 reg_hi)
> > > +{
> > > + struct device *dev = &pdev->dev;
> > > + struct cxl_mem *cxlm;
> > > + void __iomem *regs;
> > > + u64 offset;
> > > + u8 bar;
> > > + int rc;
> > > +
> > > + cxlm = devm_kzalloc(&pdev->dev, sizeof(*cxlm), GFP_KERNEL);
> > > + if (!cxlm) {
> > > + dev_err(dev, "No memory available\n");
> > > + return NULL;
> > > + }
> > > +
> > > + offset = ((u64)reg_hi << 32) | FIELD_GET(CXL_REGLOC_ADDR_MASK, reg_lo);
> > > + bar = FIELD_GET(CXL_REGLOC_BIR_MASK, reg_lo);
> > > +
> > > + /* Basic sanity check that BAR is big enough */
> > > + if (pci_resource_len(pdev, bar) < offset) {
> > > + dev_err(dev, "BAR%d: %pr: too small (offset: %#llx)\n", bar,
> > > + &pdev->resource[bar], (unsigned long long)offset);
> > > + return NULL;
> > > + }
> > > +
> > > + rc = pcim_iomap_regions(pdev, BIT(bar), pci_name(pdev));
> > > + if (rc != 0) {
> > > + dev_err(dev, "failed to map registers\n");
> > > + return NULL;
> > > + }
> > > + regs = pcim_iomap_table(pdev)[bar];
> > > +
> > > + mutex_init(&cxlm->mbox_mutex);
> > > + cxlm->pdev = pdev;
> > > + cxlm->regs = regs + offset;
> > > +
> > > + dev_dbg(dev, "Mapped CXL Memory Device resource\n");
> > > + return cxlm;
> > > +}
> > >
> > > static int cxl_mem_dvsec(struct pci_dev *pdev, int dvsec)
> > > {
> > > @@ -28,10 +423,85 @@ static int cxl_mem_dvsec(struct pci_dev *pdev, int
> > > dvsec)
> > > return 0;
> > > }
> > >
> > > +/**
> > > + * cxl_mem_identify() - Send the IDENTIFY command to the device.
> > > + * @cxlm: The device to identify.
> > > + *
> > > + * Return: 0 if identify was executed successfully.
> > > + *
> > > + * This will dispatch the identify command to the device and on success
> > > populate
> > > + * structures to be exported to sysfs.
> > > + */
> > > +static int cxl_mem_identify(struct cxl_mem *cxlm)
> > > +{
> > > + struct cxl_mbox_identify {
> > > + char fw_revision[0x10];
> > > + __le64 total_capacity;
> > > + __le64 volatile_capacity;
> > > + __le64 persistent_capacity;
> > > + __le64 partition_align;
> > > + __le16 info_event_log_size;
> > > + __le16 warning_event_log_size;
> > > + __le16 failure_event_log_size;
> > > + __le16 fatal_event_log_size;
> > > + __le32 lsa_size;
> > > + u8 poison_list_max_mer[3];
> > > + __le16 inject_poison_limit;
> > > + u8 poison_caps;
> > > + u8 qos_telemetry_caps;
> > > + } __packed id;
> > > + struct mbox_cmd mbox_cmd = {
> > > + .opcode = CXL_MBOX_OP_IDENTIFY,
> > > + .payload_out = &id,
> > > + .size_in = 0,
> > > + };
> > > + int rc;
> > > +
> > > + /* Retrieve initial device memory map */
> > > + rc = cxl_mem_mbox_get(cxlm);
> > > + if (rc)
> > > + return rc;
> > > +
> > > + rc = cxl_mem_mbox_send_cmd(cxlm, &mbox_cmd);
> > > + cxl_mem_mbox_put(cxlm);
> > > + if (rc)
> > > + return rc;
> > > +
> > > + /* TODO: Handle retry or reset responses from firmware. */
> > > + if (mbox_cmd.return_code != CXL_MBOX_SUCCESS) {
> > > + dev_err(&cxlm->pdev->dev, "Mailbox command failed (%d)\n",
> > > + mbox_cmd.return_code);
> > > + return -ENXIO;
> > > + }
> > > +
> > > + if (mbox_cmd.size_out != sizeof(id))
> > > + return -ENXIO;
> > > +
> > > + /*
> > > + * TODO: enumerate DPA map, as 'ram' and 'pmem' do not alias.
> > > + * For now, only the capacity is exported in sysfs
> > > + */
> > > + cxlm->ram.range.start = 0;
> > > + cxlm->ram.range.end = le64_to_cpu(id.volatile_capacity) - 1;
> > > +
> > > + cxlm->pmem.range.start = 0;
> > > + cxlm->pmem.range.end = le64_to_cpu(id.persistent_capacity) - 1;
> > > +
> > > + memcpy(cxlm->firmware_version, id.fw_revision, sizeof(id.fw_revision));
> > > +
> > > + return rc;
> > > +}
> > > +
> > > static int cxl_mem_probe(struct pci_dev *pdev, const struct
> > > pci_device_id *id)
> > > {
> > > struct device *dev = &pdev->dev;
> > > - int regloc;
> > > + struct cxl_mem *cxlm;
> > > + int rc, regloc, i;
> > > + u32 regloc_size;
> > > +
> > > + rc = pcim_enable_device(pdev);
> > > + if (rc)
> > > + return rc;
> > >
> > > regloc = cxl_mem_dvsec(pdev, PCI_DVSEC_ID_CXL_REGLOC_OFFSET);
> > > if (!regloc) {
> > > @@ -39,7 +509,44 @@ static int cxl_mem_probe(struct pci_dev *pdev, const
> > > struct pci_device_id *id)
> > > return -ENXIO;
> > > }
> > >
> > > - return 0;
> > > + /* Get the size of the Register Locator DVSEC */
> > > + pci_read_config_dword(pdev, regloc + PCI_DVSEC_HEADER1, ®loc_size);
> > > + regloc_size = FIELD_GET(PCI_DVSEC_HEADER1_LENGTH_MASK, regloc_size);
> > > +
> > > + regloc += PCI_DVSEC_ID_CXL_REGLOC_BLOCK1_OFFSET;
> > > +
> > > + rc = -ENXIO;
> > > + for (i = regloc; i < regloc + regloc_size; i += 8) {
> > > + u32 reg_lo, reg_hi;
> > > + u8 reg_type;
> > > +
> > > + /* "register low and high" contain other bits */
> > > + pci_read_config_dword(pdev, i, ®_lo);
> > > + pci_read_config_dword(pdev, i + 4, ®_hi);
> > > +
> > > + reg_type = FIELD_GET(CXL_REGLOC_RBI_MASK, reg_lo);
> > > +
> > > + if (reg_type == CXL_REGLOC_RBI_MEMDEV) {
> > > + rc = 0;
> > > + cxlm = cxl_mem_create(pdev, reg_lo, reg_hi);
> > > + if (!cxlm)
> > > + rc = -ENODEV;
> > > + break;
> > > + }
> > > + }
> > > +
> > > + if (rc)
> > > + return rc;
> > > +
> > > + rc = cxl_mem_setup_regs(cxlm);
> > > + if (rc)
> > > + return rc;
> > > +
> > > + rc = cxl_mem_setup_mailbox(cxlm);
> > > + if (rc)
> > > + return rc;
> > > +
> > > + return cxl_mem_identify(cxlm);
> > > }
> > >
> > > static const struct pci_device_id cxl_mem_pci_tbl[] = {
> > > diff --git a/drivers/cxl/pci.h b/drivers/cxl/pci.h
> > > index f135b9f7bb21..ffcbc13d7b5b 100644
> > > --- a/drivers/cxl/pci.h
> > > +++ b/drivers/cxl/pci.h
> > > @@ -14,5 +14,18 @@
> > > #define PCI_DVSEC_ID_CXL 0x0
> > >
> > > #define PCI_DVSEC_ID_CXL_REGLOC_OFFSET 0x8
> > > +#define PCI_DVSEC_ID_CXL_REGLOC_BLOCK1_OFFSET 0xC
> > > +
> > > +/* BAR Indicator Register (BIR) */
> > > +#define CXL_REGLOC_BIR_MASK GENMASK(2, 0)
> > > +
> > > +/* Register Block Identifier (RBI) */
> > > +#define CXL_REGLOC_RBI_MASK GENMASK(15, 8)
> > > +#define CXL_REGLOC_RBI_EMPTY 0
> > > +#define CXL_REGLOC_RBI_COMPONENT 1
> > > +#define CXL_REGLOC_RBI_VIRT 2
> > > +#define CXL_REGLOC_RBI_MEMDEV 3
> > > +
> > > +#define CXL_REGLOC_ADDR_MASK GENMASK(31, 16)
> > >
> > > #endif /* __CXL_PCI_H__ */
> > > diff --git a/include/uapi/linux/pci_regs.h b/include/uapi/linux/pci_regs.h
> > > index e709ae8235e7..6267ca9ae683 100644
> > > --- a/include/uapi/linux/pci_regs.h
> > > +++ b/include/uapi/linux/pci_regs.h
> > > @@ -1080,6 +1080,7 @@
> > >
> > > /* Designated Vendor-Specific (DVSEC, PCI_EXT_CAP_ID_DVSEC) */
> > > #define PCI_DVSEC_HEADER1 0x4 /* Designated
> > > Vendor-Specific Header1 */
> > > +#define PCI_DVSEC_HEADER1_LENGTH_MASK 0xFFF00000
> > > #define PCI_DVSEC_HEADER2 0x8 /* Designated
> > > Vendor-Specific Header2 */
> > >
> > > /* Data Link Feature */
> >
>
