From: Rafael J. Wysocki <[email protected]> Replace the direct printk() invocations in pci_link.c with (mostly corresponding) acpi_handle_*() calls relative to the ACPI handle of the given link device, which allows the AML corresponding to those messages to be identified more easily, or with pr_*() calls.
While at it, add a pr_fmt() definition ot pci_link.c, make acpi_pci_link_check_possible() print all messages with acpi_handle_debug() for consistency and replace the (not-so- reliable) KERN_CONT-based message line composition in acpi_pci_link_add() with two pr_info() and a series of acpi_handle_debug() calls (the latter for the possible IRQs). Signed-off-by: Rafael J. Wysocki <[email protected]> --- drivers/acpi/pci_link.c | 86 +++++++++++++++++++++--------------------------- 1 file changed, 38 insertions(+), 48 deletions(-) Index: linux-pm/drivers/acpi/pci_link.c =================================================================== --- linux-pm.orig/drivers/acpi/pci_link.c +++ linux-pm/drivers/acpi/pci_link.c @@ -12,6 +12,8 @@ * for IRQ management (e.g. start()->_SRS). */ +#define pr_fmt(fmt) "ACPI: PCI: " fmt + #include <linux/syscore_ops.h> #include <linux/kernel.h> #include <linux/module.h> @@ -102,9 +104,9 @@ static acpi_status acpi_pci_link_check_p (i < p->interrupt_count && i < ACPI_PCI_LINK_MAX_POSSIBLE); i++) { if (!p->interrupts[i]) { - printk(KERN_WARNING PREFIX - "Invalid _PRS IRQ %d\n", - p->interrupts[i]); + acpi_handle_debug(handle, + "Invalid _PRS IRQ %d\n", + p->interrupts[i]); continue; } link->irq.possible[i] = p->interrupts[i]; @@ -120,17 +122,17 @@ static acpi_status acpi_pci_link_check_p struct acpi_resource_extended_irq *p = &resource->data.extended_irq; if (!p || !p->interrupt_count) { - printk(KERN_WARNING PREFIX - "Blank _PRS EXT IRQ resource\n"); + acpi_handle_debug(handle, + "Blank _PRS EXT IRQ resource\n"); return AE_OK; } for (i = 0; (i < p->interrupt_count && i < ACPI_PCI_LINK_MAX_POSSIBLE); i++) { if (!p->interrupts[i]) { - printk(KERN_WARNING PREFIX - "Invalid _PRS IRQ %d\n", - p->interrupts[i]); + acpi_handle_debug(handle, + "Invalid _PRS IRQ %d\n", + p->interrupts[i]); continue; } link->irq.possible[i] = p->interrupts[i]; @@ -142,8 +144,8 @@ static acpi_status acpi_pci_link_check_p break; } default: - printk(KERN_ERR PREFIX "_PRS resource type 0x%x isn't an IRQ\n", - resource->type); + acpi_handle_debug(handle, "_PRS resource type 0x%x is not IRQ\n", + resource->type); return AE_OK; } @@ -527,6 +529,7 @@ static int acpi_irq_balance = -1; /* 0: static int acpi_pci_link_allocate(struct acpi_pci_link *link) { + acpi_handle handle = link->device->handle; int irq; int i; @@ -549,8 +552,8 @@ static int acpi_pci_link_allocate(struct */ if (i == link->irq.possible_count) { if (acpi_strict) - printk(KERN_WARNING PREFIX "_CRS %d not found" - " in _PRS\n", link->irq.active); + acpi_handle_warn(handle, "_CRS %d not found in _PRS\n", + link->irq.active); link->irq.active = 0; } @@ -574,28 +577,23 @@ static int acpi_pci_link_allocate(struct } } if (acpi_irq_get_penalty(irq) >= PIRQ_PENALTY_ISA_ALWAYS) { - printk(KERN_ERR PREFIX "No IRQ available for %s [%s]. " - "Try pci=noacpi or acpi=off\n", - acpi_device_name(link->device), - acpi_device_bid(link->device)); + acpi_handle_err(handle, + "No IRQ available. Try pci=noacpi or acpi=off\n"); return -ENODEV; } /* Attempt to enable the link device at this IRQ. */ if (acpi_pci_link_set(link, irq)) { - printk(KERN_ERR PREFIX "Unable to set IRQ for %s [%s]. " - "Try pci=noacpi or acpi=off\n", - acpi_device_name(link->device), - acpi_device_bid(link->device)); + acpi_handle_err(handle, + "Unable to set IRQ. Try pci=noacpi or acpi=off\n"); return -ENODEV; } else { if (link->irq.active < ACPI_MAX_ISA_IRQS) acpi_isa_irq_penalty[link->irq.active] += PIRQ_PENALTY_PCI_USING; - pr_info("%s [%s] enabled at IRQ %d\n", - acpi_device_name(link->device), - acpi_device_bid(link->device), link->irq.active); + acpi_handle_info(handle, "Enabled at IRQ %d\n", + link->irq.active); } link->irq.initialized = 1; @@ -616,19 +614,19 @@ int acpi_pci_link_allocate_irq(acpi_hand result = acpi_bus_get_device(handle, &device); if (result) { - printk(KERN_ERR PREFIX "Invalid link device\n"); + acpi_handle_err(handle, "Invalid link device\n"); return -1; } link = acpi_driver_data(device); if (!link) { - printk(KERN_ERR PREFIX "Invalid link context\n"); + acpi_handle_err(handle, "Invalid link context\n"); return -1; } /* TBD: Support multiple index (IRQ) entries per Link Device */ if (index) { - printk(KERN_ERR PREFIX "Invalid index %d\n", index); + acpi_handle_err(handle, "Invalid index %d\n", index); return -1; } @@ -640,7 +638,7 @@ int acpi_pci_link_allocate_irq(acpi_hand if (!link->irq.active) { mutex_unlock(&acpi_link_lock); - printk(KERN_ERR PREFIX "Link active IRQ is 0!\n"); + acpi_handle_err(handle, "Link active IRQ is 0!\n"); return -1; } link->refcnt++; @@ -668,20 +666,20 @@ int acpi_pci_link_free_irq(acpi_handle h result = acpi_bus_get_device(handle, &device); if (result) { - printk(KERN_ERR PREFIX "Invalid link device\n"); + acpi_handle_err(handle, "Invalid link device\n"); return -1; } link = acpi_driver_data(device); if (!link) { - printk(KERN_ERR PREFIX "Invalid link context\n"); + acpi_handle_err(handle, "Invalid link context\n"); return -1; } mutex_lock(&acpi_link_lock); if (!link->irq.initialized) { mutex_unlock(&acpi_link_lock); - printk(KERN_ERR PREFIX "Link isn't initialized\n"); + acpi_handle_err(handle, "Link isn't initialized\n"); return -1; } #ifdef FUTURE_USE @@ -712,10 +710,10 @@ int acpi_pci_link_free_irq(acpi_handle h static int acpi_pci_link_add(struct acpi_device *device, const struct acpi_device_id *not_used) { - int result; + acpi_handle handle = device->handle; struct acpi_pci_link *link; + int result; int i; - int found = 0; link = kzalloc(sizeof(struct acpi_pci_link), GFP_KERNEL); if (!link) @@ -734,31 +732,23 @@ static int acpi_pci_link_add(struct acpi /* query and set link->irq.active */ acpi_pci_link_get_current(link); - printk(KERN_INFO PREFIX "%s [%s] (IRQs", acpi_device_name(device), - acpi_device_bid(device)); + pr_info("Interrupt link %s configured for IRQ %d\n", + acpi_device_bid(device), link->irq.active); + for (i = 0; i < link->irq.possible_count; i++) { - if (link->irq.active == link->irq.possible[i]) { - printk(KERN_CONT " *%d", link->irq.possible[i]); - found = 1; - } else - printk(KERN_CONT " %d", link->irq.possible[i]); + if (link->irq.active != link->irq.possible[i]) + acpi_handle_debug(handle, "Possible IRQ %d\n", + link->irq.possible[i]); } - printk(KERN_CONT ")"); - - if (!found) - printk(KERN_CONT " *%d", link->irq.active); - if (!link->device->status.enabled) - printk(KERN_CONT ", disabled."); - - printk(KERN_CONT "\n"); + pr_info("Interrupt link %s disabled\n", acpi_device_bid(device)); list_add_tail(&link->list, &acpi_link_list); end: /* disable all links -- to be activated on use */ - acpi_evaluate_object(device->handle, "_DIS", NULL, NULL); + acpi_evaluate_object(handle, "_DIS", NULL, NULL); mutex_unlock(&acpi_link_lock); if (result)
