[PATCH 04/30] drm/bridge/tc358767: Don't register DP AUX channel until bridge is attached

[Lyude Paul]

Since this is a bridge, we don't start out with a respective DRM device.
Likewise this means we don't have a connector, which also means that we
should be following drm_dp_aux_register()'s documentation advice and not
call drm_dp_aux_register() until we have a matching connector. Instead,
call drm_dp_aux_init() in tc_probe() and wait until tc_bridge_attach() to
register our AUX channel. We also add tc_bridge_detach() to handle
unregistering the AUX adapter once the bridge has been disconnected.

Signed-off-by: Lyude Paul <ly...@redhat.com>
---
 drivers/gpu/drm/bridge/tc358767.c | 20 +++++++++++++++-----
 1 file changed, 15 insertions(+), 5 deletions(-)

diff --git a/drivers/gpu/drm/bridge/tc358767.c 
b/drivers/gpu/drm/bridge/tc358767.c
index 34a3e4e9f717..da89922721ed 100644
--- a/drivers/gpu/drm/bridge/tc358767.c
+++ b/drivers/gpu/drm/bridge/tc358767.c
@@ -1414,11 +1414,15 @@ static int tc_bridge_attach(struct drm_bridge *bridge,
        if (flags & DRM_BRIDGE_ATTACH_NO_CONNECTOR)
                return 0;
 
+       ret = drm_dp_aux_register(&tc->aux);
+       if (ret < 0)
+               return ret;
+
        /* Create DP/eDP connector */
        drm_connector_helper_add(&tc->connector, &tc_connector_helper_funcs);
        ret = drm_connector_init(drm, &tc->connector, &tc_connector_funcs, 
tc->bridge.type);
        if (ret)
-               return ret;
+               goto aux_unregister;
 
        /* Don't poll if don't have HPD connected */
        if (tc->hpd_pin >= 0) {
@@ -1438,10 +1442,19 @@ static int tc_bridge_attach(struct drm_bridge *bridge,
        drm_connector_attach_encoder(&tc->connector, tc->bridge.encoder);
 
        return 0;
+aux_unregister:
+       drm_dp_aux_unregister(&tc->aux);
+       return ret;
+}
+
+static void tc_bridge_detach(struct drm_bridge *bridge)
+{
+       drm_dp_aux_unregister(&bridge_to_tc(bridge)->aux);
 }
 
 static const struct drm_bridge_funcs tc_bridge_funcs = {
        .attach = tc_bridge_attach,
+       .detach = tc_bridge_detach,
        .mode_valid = tc_mode_valid,
        .mode_set = tc_bridge_mode_set,
        .enable = tc_bridge_enable,
@@ -1680,9 +1693,7 @@ static int tc_probe(struct i2c_client *client, const 
struct i2c_device_id *id)
        tc->aux.name = "TC358767 AUX i2c adapter";
        tc->aux.dev = tc->dev;
        tc->aux.transfer = tc_aux_transfer;
-       ret = drm_dp_aux_register(&tc->aux);
-       if (ret)
-               return ret;
+       drm_dp_aux_init(&tc->aux);
 
        tc->bridge.funcs = &tc_bridge_funcs;
        if (tc->hpd_pin >= 0)
@@ -1702,7 +1713,6 @@ static int tc_remove(struct i2c_client *client)
        struct tc_data *tc = i2c_get_clientdata(client);
 
        drm_bridge_remove(&tc->bridge);
-       drm_dp_aux_unregister(&tc->aux);
 
        return 0;
 }
-- 
2.29.2