Hi Robert,

Thank you for your patch!

Reviewed-by: Andrey Konovalov <andrey.konova...@linaro.org>

Thanks,
Andrey

On 17.02.2021 14:21, Robert Foss wrote:
Enable camss & ov8856 DT nodes.

Signed-off-by: Robert Foss <robert.f...@linaro.org>
---

Changes since v1
  - Laurent: Fix subject
  - Laurent: Remove redundant regulator labels
  - Laurent: Remove empty line

Changes since v3
  - Fixed ordering of IRQs
  - Add newlines for better readability

  arch/arm64/boot/dts/qcom/sdm845-db845c.dts | 19 +++++++++++++++++--
  1 file changed, 17 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts 
b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
index 5842ab65789c..d89286f6aacb 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
@@ -1108,6 +1108,21 @@ &cci {
&camss {
        vdda-supply = <&vreg_l1a_0p875>;
+
+       status = "ok";
+
+       ports {
+               #address-cells = <1>;
+               #size-cells = <0>;
+               port@0 {
+                       reg = <0>;
+                       csiphy0_ep: endpoint {
+                               clock-lanes = <1>;
+                               data-lanes = <1 2 3 4>;
+                               remote-endpoint = <&ov8856_ep>;
+                       };
+               };
+       };
  };
&cci_i2c0 {
@@ -1139,7 +1154,7 @@ camera@10 {
                avdd-supply = <&cam0_avdd_2v8>;
                dvdd-supply = <&cam0_dvdd_1v2>;
- status = "disable";
+               status = "ok";
port {
                        ov8856_ep: endpoint {
@@ -1147,7 +1162,7 @@ ov8856_ep: endpoint {
                                link-frequencies = /bits/ 64
                                        <360000000 180000000>;
                                data-lanes = <1 2 3 4>;
-//                             remote-endpoint = <&csiphy0_ep>;
+                               remote-endpoint = <&csiphy0_ep>;
                        };
                };
        };

Reply via email to