Am Dienstag, 23. Februar 2021, 11:50:25 CET schrieb Johan Jonker: > Hi Elaine, > > This is a new document. > Could you convert rockchip,rk3568-cru.txt to yaml?
I'll definitly second that wish for a conversion to yaml. Having the ability to check devicetrees for correctness is quite helpful :-) Heiko > To get an acked-by you must include: > > robh...@kernel.org > devicet...@vger.kernel.org > > ./scripts/get_maintainer.pl --noroles --norolestats --nogit-fallback > --nogit <patch> > > Your patch should show up here after filtering: > https://patchwork.ozlabs.org/project/devicetree-bindings/list/ > > Check with: > > make ARCH=arm64 dt_binding_check > DT_SCHEMA_FILES=Documentation/devicetree/bindings/pinctrl/rockchip,rk3568-cru.yaml > > make ARCH=arm64 dtbs_check > DT_SCHEMA_FILES=Documentation/devicetree/bindings/pinctrl/rockchip,rk3568-cru.yaml > > ./scripts/checkpatch.pl --strict <patch> > > > On 2/23/21 10:53 AM, Elaine Zhang wrote: > > Add devicetree bindings for Rockchip cru which found on > > Rockchip SoCs. > > > > Signed-off-by: Elaine Zhang <zhangq...@rock-chips.com> > > --- > > .../bindings/clock/rockchip,rk3568-cru.txt | 66 +++++++++++++++++++ > > 1 file changed, 66 insertions(+) > > create mode 100644 > > Documentation/devicetree/bindings/clock/rockchip,rk3568-cru.txt > > > > diff --git > > a/Documentation/devicetree/bindings/clock/rockchip,rk3568-cru.txt > > b/Documentation/devicetree/bindings/clock/rockchip,rk3568-cru.txt > > new file mode 100644 > > index 000000000000..b1119aecb7c7 > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/clock/rockchip,rk3568-cru.txt > > @@ -0,0 +1,66 @@ > > +* Rockchip RK3568 Clock and Reset Unit > > + > > +The RK3568 clock controller generates and supplies clock to various > > +controllers within the SoC and also implements a reset controller for SoC > > +peripherals. > > + > > +Required Properties: > > + > > +- compatible: PMU for CRU should be "rockchip,rk3568-pmucru" > > +- compatible: CRU should be "rockchip,rk3568-cru" > > +- reg: physical base address of the controller and length of memory mapped > > + region. > > +- #clock-cells: should be 1. > > +- #reset-cells: should be 1. > > + > > +Optional Properties: > > + > > +- rockchip,grf: phandle to the syscon managing the "general register files" > > + If missing, pll rates are not changeable, due to the missing pll lock > > status. > > + > > +Each clock is assigned an identifier and client nodes can use this > > identifier > > +to specify the clock which they consume. All available clocks are defined > > as > > +preprocessor macros in the dt-bindings/clock/rk3568-cru.h headers and can > > be > > +used in device tree sources. Similar macros exist for the reset sources in > > +these files. > > + > > +External clocks: > > + > > +There are several clocks that are generated outside the SoC. It is expected > > +that they are defined using standard clock bindings with following > > +clock-output-names: > > + - "xin24m" - crystal input - required, > > + - "xin32k" - rtc clock - optional, > > + - "i2sx_mclkin" - external I2S clock - optional, > > + - "xin_osc0_usbphyx_g" - external USBPHY clock - optional, > > + - "xin_osc0_mipidsiphyx_g" - external MIPIDSIPHY clock - optional, > > + > > +Example: Clock controller node: > > + > > + pmucru: clock-controller@fdd00000 { > > + compatible = "rockchip,rK3568-pmucru"; > > + reg = <0x0 0xfdd00000 0x0 0x1000>; > > + #clock-cells = <1>; > > + #reset-cells = <1>; > > + }; > > + > > + cru: clock-controller@fdd20000 { > > + compatible = "rockchip,rK3568-cru"; > > + reg = <0x0 0xfdd20000 0x0 0x1000>; > > + rockchip,grf = <&grf>; > > + #clock-cells = <1>; > > + #reset-cells = <1>; > > + }; > > + > > +Example: UART controller node that consumes the clock generated by the > > clock > > + controller: > > + > > + uart1: serial@fe650000 { > > + compatible = "rockchip,rK3568-uart", "snps,dw-apb-uart"; > > + reg = <0x0 0xfe650000 0x0 0x100>; > > + interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>; > > + reg-shift = <2>; > > + reg-io-width = <4>; > > + clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>; > > + clock-names = "baudclk", "apb_pclk"; > > + }; > > > >