Hi Benjamin,
Thanks for the good work!
I mostly have two concerns with this implementation,
the tiled output and the allocation path.
More below.
On Mon, 2021-02-22 at 13:24 +0100, Benjamin Gaignard wrote:
> Implement all the logic to get G2 hardware decoding HEVC frames.
> It support up level 5.1 HEVC stream.
> It doesn't support yet 10 bits formats or scaling feature.
>
> Add HANTRO HEVC dedicated control to skip some bits at the beginning
> of the slice header. That is very specific to this hardware so can't
> go into uapi structures. Compute the needed value is complex and require
> information from the stream that only the userland knows so let it
> provide the correct value to the driver.
>
> Signed-off-by: Benjamin Gaignard <benjamin.gaign...@collabora.com>
> ---
> version 2:
> - squash multiple commits in this one.
> - fix the comments done by Ezequiel about dma_alloc_coherent usage
> - fix Dan's comments about control copy, reverse the test logic
> in tile_buffer_reallocate, rework some goto and return cases.
>
> drivers/staging/media/hantro/Makefile | 2 +
> drivers/staging/media/hantro/hantro.h | 19 +
> drivers/staging/media/hantro/hantro_drv.c | 42 ++
> .../staging/media/hantro/hantro_g2_hevc_dec.c | 587 ++++++++++++++++++
> drivers/staging/media/hantro/hantro_g2_regs.h | 198 ++++++
> drivers/staging/media/hantro/hantro_hevc.c | 321 ++++++++++
> drivers/staging/media/hantro/hantro_hw.h | 47 ++
> 7 files changed, 1216 insertions(+)
> create mode 100644 drivers/staging/media/hantro/hantro_g2_hevc_dec.c
> create mode 100644 drivers/staging/media/hantro/hantro_g2_regs.h
> create mode 100644 drivers/staging/media/hantro/hantro_hevc.c
>
>
[snip]
> +
> +static void set_buffers(struct hantro_ctx *ctx)
> +{
> + struct vb2_v4l2_buffer *src_buf, *dst_buf;
> + struct hantro_dev *vpu = ctx->dev;
> + const struct hantro_hevc_dec_ctrls *ctrls = &ctx->hevc_dec.ctrls;
> + const struct v4l2_ctrl_hevc_sps *sps = ctrls->sps;
> + size_t cr_offset = hantro_hevc_chroma_offset(sps);
> + dma_addr_t src_dma, dst_dma;
> + u32 src_len, src_buf_len;
> +
> + src_buf = hantro_get_src_buf(ctx);
> + dst_buf = hantro_get_dst_buf(ctx);
> +
> + /* Source (stream) buffer. */
> + src_dma = vb2_dma_contig_plane_dma_addr(&src_buf->vb2_buf, 0);
> + src_len = vb2_get_plane_payload(&src_buf->vb2_buf, 0);
> + src_buf_len = vb2_plane_size(&src_buf->vb2_buf, 0);
> +
> + hantro_write_addr(vpu, HEVC_ADDR_STR, src_dma);
> + hantro_reg_write(vpu, hevc_stream_len, src_len);
> + hantro_reg_write(vpu, hevc_strm_buffer_len, src_buf_len);
> + hantro_reg_write(vpu, hevc_strm_start_offset, 0);
> + hantro_reg_write(vpu, hevc_write_mvs_e, 1);
> +
> + /* Destination (decoded frame) buffer. */
> + dst_dma = hantro_get_dec_buf_addr(ctx, &dst_buf->vb2_buf);
> +
> + hantro_write_addr(vpu, HEVC_RASTER_SCAN, dst_dma);
> + hantro_write_addr(vpu, HEVC_RASTER_SCAN_CHR, dst_dma + cr_offset);
The way this is done the raster-scan output is the only
output, and the tiled ouput it kept entirely internal, in
hantro_hevc_dec_hw_ctx.ref_bufs.
This means there's no way to expose tiled NV12 in i.MX8M VPU tiled format
to userspace, which could be desirable for some use cases.
I'm not suggesting to actually expose tiled NV12 in this patch, but to prepare
the driver to be able to support that easily in the future.
It should be possible to consider this detiling as
post-processing, adding some code in hantro_postproc.c
leveraging the existing post-proc support.
IOW, hantro_postproc_ctx.dec_q would hold the tiled output,
hantro_postproc_enable() writes the raster-scan
buffer destination address, and so on.
> + hantro_write_addr(vpu, HEVC_ADDR_TILE_SIZE,
> ctx->hevc_dec.tile_sizes.dma);
> + hantro_write_addr(vpu, HEVC_TILE_FILTER,
> ctx->hevc_dec.tile_filter.dma);
> + hantro_write_addr(vpu, HEVC_TILE_SAO, ctx->hevc_dec.tile_sao.dma);
> + hantro_write_addr(vpu, HEVC_TILE_BSD, ctx->hevc_dec.tile_bsd.dma);
> +}
> +
> +void hantro_g2_check_idle(struct hantro_dev *vpu)
> +{
> + int i;
> +
> + for (i = 0; i < 3; i++) {
> + u32 status;
> +
> + /* Make sure the VPU is idle */
> + status = vdpu_read(vpu, HEVC_REG_INTERRUPT);
> + if (status & HEVC_REG_INTERRUPT_DEC_E) {
> + pr_warn("%s: still enabled!!! resetting.\n",
> __func__);
> + status |= HEVC_REG_INTERRUPT_DEC_ABORT_E |
> HEVC_REG_INTERRUPT_DEC_IRQ_DIS;
> + vdpu_write(vpu, status, HEVC_REG_INTERRUPT);
> + }
> + }
> +}
> +
> +void hantro_g2_hevc_dec_run(struct hantro_ctx *ctx)
> +{
> + struct hantro_dev *vpu = ctx->dev;
> +
> + hantro_g2_check_idle(vpu);
> +
> + /* Prepare HEVC decoder context. */
> + if (hantro_hevc_dec_prepare_run(ctx))
> + return;
> +
> + /* Configure hardware registers. */
> + set_params(ctx);
> +
> + /* set reference pictures */
> + if (set_ref(ctx))
> + /* something goes wrong */
> + hantro_irq_done(vpu, VB2_BUF_STATE_ERROR);
> +
I don't think we want to allow the _run() operation to fail like this.
In other words, I would avoid allocating buffers in the _run() path,
and doing all allocation at start() time.
That's why hantro_start_streaming() calls hantro_postproc_alloc() if needed.
> + set_buffers(ctx);
> + prepare_tile_info_buffer(ctx);
> +
> + hantro_end_prepare_run(ctx);
> +
> + hantro_reg_write(vpu, hevc_mode, HEVC_DEC_MODE);
> + hantro_reg_write(vpu, hevc_clk_gate_e, 1);
> +
> + /* Don't disable output */
> + hantro_reg_write(vpu, hevc_out_dis, 0);
> +
> + /* Don't compress buffers */
> + hantro_reg_write(vpu, hevc_ref_compress_bypass, 1);
> +
> + /* use NV12 as output format */
> + hantro_reg_write(vpu, hevc_tile_e, 0);
Unless I'm missing something, this ^
> + hantro_reg_write(vpu, hevc_out_rs_e, 1);
> + hantro_reg_write(vpu, hevc_num_tile_rows, 1);
> + hantro_reg_write(vpu, hevc_num_tile_cols, 1);
> +
and this ^ these shouldn't be here.
HEVC tiles are handled already. See prepare_tile_info_buffer().
Note that HEVC "tiles" are not related to NV12 "tiled" format.
Thanks!
Ezequiel
