From: Robert Foss <robert.f...@linaro.org>
[ Upstream commit d4863ef399a29cae3001b3fedfd2864e651055ba ]
Switch reset pin of ov8856 node from GPIO_ACTIVE_HIGH to GPIO_ACTIVE_LOW,
this issue prevented the ov8856 from probing properly as it did not respon
to I2C messages.
Fixes: d4919a44564b ("arm64: dts: qcom: sdm845-db845c: Add ov8856 & ov7251
camera nodes")
Signed-off-by: Robert Foss <robert.f...@linaro.org>
Link: https://lore.kernel.org/r/20201221100955.148584-1-robert.f...@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.anders...@linaro.org>
Signed-off-by: Sasha Levin <sas...@kernel.org>
---
arch/arm64/boot/dts/qcom/sdm845-db845c.dts | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
index c0b93813ea9ac..c4ac6f5dc008d 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
@@ -1114,11 +1114,11 @@
reg = <0x10>;
// CAM0_RST_N
- reset-gpios = <&tlmm 9 0>;
+ reset-gpios = <&tlmm 9 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&cam0_default>;
gpios = <&tlmm 13 0>,
- <&tlmm 9 0>;
+ <&tlmm 9 GPIO_ACTIVE_LOW>;
clocks = <&clock_camcc CAM_CC_MCLK0_CLK>;
clock-names = "xvclk";
--
2.27.0
