From: Tony Lindgren <t...@atomide.com>
[ Upstream commit 44f416879a442600b006ef7dec3a6dc98bcf59c6 ]
We have gpio_86 wired internally to the bandgap thermal shutdown
interrupt on 4430 like we have it on 4460 according to the TRM.
This can be found easily by searching for TSHUT.
For some reason the thermal shutdown interrupt was never added
for 4430, let's add it. I believe this is needed for the thermal
shutdown interrupt handler ti_bandgap_tshut_irq_handler() to call
orderly_poweroff().
Fixes: aa9bb4bb8878 ("arm: dts: add omap4430 thermal data")
Cc: Carl Philipp Klemm <phil...@uvos.xyz>
Cc: Daniel Lezcano <daniel.lezc...@linaro.org>
Cc: Eduardo Valentin <edubez...@gmail.com>
Cc: Merlijn Wajer <merl...@wizzup.org>
Cc: Pavel Machek <pa...@ucw.cz>
Cc: Peter Ujfalusi <peter.ujfal...@gmail.com>
Cc: Sebastian Reichel <s...@kernel.org>
Signed-off-by: Tony Lindgren <t...@atomide.com>
Signed-off-by: Sasha Levin <sas...@kernel.org>
---
arch/arm/boot/dts/omap443x.dtsi | 2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/arm/boot/dts/omap443x.dtsi b/arch/arm/boot/dts/omap443x.dtsi
index cb309743de5da..dd8ef58cbaed4 100644
--- a/arch/arm/boot/dts/omap443x.dtsi
+++ b/arch/arm/boot/dts/omap443x.dtsi
@@ -33,10 +33,12 @@
};
ocp {
+ /* 4430 has only gpio_86 tshut and no talert interrupt */
bandgap: bandgap@4a002260 {
reg = <0x4a002260 0x4
0x4a00232C 0x4>;
compatible = "ti,omap4430-bandgap";
+ gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>;
#thermal-sensor-cells = <0>;
};
--
2.27.0
