Rather than remove and/or mangle inb_p/outb_p we want to remove the use
of them from inappropriate places. For the PIC/PIT this may eventually
depend on 32/64bitism or similar so start by adding inb/outb_pit and
inb/outb_pic so that we can make them use any scheme we settle on without
disturbing the existing, correct (for ISA), port 0x80 usage. (eg we can
make inb_pit use udelay without messing up inb_p).
Floppy already does this for the fdc. That really only leaves the CMOS as
a core logic item to tackle, and bits of parallel port handling in the
chipset layers.
Signed-off-by: Alan Cox <[EMAIL PROTECTED]>
diff -u --new-file --recursive --exclude-from /usr/src/exclude
linux.vanilla-2.6.24-rc6-mm1/arch/x86/kernel/apm_32.c
linux-2.6.24-rc6-mm1/arch/x86/kernel/apm_32.c
--- linux.vanilla-2.6.24-rc6-mm1/arch/x86/kernel/apm_32.c 2008-01-02
16:04:19.000000000 +0000
+++ linux-2.6.24-rc6-mm1/arch/x86/kernel/apm_32.c 2008-01-11
15:05:39.000000000 +0000
@@ -1172,11 +1172,11 @@
spin_lock_irqsave(&i8253_lock, flags);
/* set the clock to HZ */
- outb_p(0x34, PIT_MODE); /* binary, mode 2, LSB/MSB, ch 0 */
+ outb_pit(0x34, PIT_MODE); /* binary, mode 2, LSB/MSB, ch
0 */
udelay(10);
- outb_p(LATCH & 0xff, PIT_CH0); /* LSB */
+ outb_pit(LATCH & 0xff, PIT_CH0); /* LSB */
udelay(10);
- outb(LATCH >> 8, PIT_CH0); /* MSB */
+ outb_pit(LATCH >> 8, PIT_CH0); /* MSB */
udelay(10);
spin_unlock_irqrestore(&i8253_lock, flags);
#endif
diff -u --new-file --recursive --exclude-from /usr/src/exclude
linux.vanilla-2.6.24-rc6-mm1/arch/x86/kernel/i8253.c
linux-2.6.24-rc6-mm1/arch/x86/kernel/i8253.c
--- linux.vanilla-2.6.24-rc6-mm1/arch/x86/kernel/i8253.c 2008-01-02
16:04:19.000000000 +0000
+++ linux-2.6.24-rc6-mm1/arch/x86/kernel/i8253.c 2008-01-11
15:10:09.000000000 +0000
@@ -36,24 +36,24 @@
switch(mode) {
case CLOCK_EVT_MODE_PERIODIC:
/* binary, mode 2, LSB/MSB, ch 0 */
- outb_p(0x34, PIT_MODE);
- outb_p(LATCH & 0xff , PIT_CH0); /* LSB */
- outb(LATCH >> 8 , PIT_CH0); /* MSB */
+ outb_pit(0x34, PIT_MODE);
+ outb_pit(LATCH & 0xff , PIT_CH0); /* LSB */
+ outb_pit(LATCH >> 8 , PIT_CH0); /* MSB */
break;
case CLOCK_EVT_MODE_SHUTDOWN:
case CLOCK_EVT_MODE_UNUSED:
if (evt->mode == CLOCK_EVT_MODE_PERIODIC ||
evt->mode == CLOCK_EVT_MODE_ONESHOT) {
- outb_p(0x30, PIT_MODE);
- outb_p(0, PIT_CH0);
- outb_p(0, PIT_CH0);
+ outb_pit(0x30, PIT_MODE);
+ outb_pit(0, PIT_CH0);
+ outb_pit(0, PIT_CH0);
}
break;
case CLOCK_EVT_MODE_ONESHOT:
/* One shot setup */
- outb_p(0x38, PIT_MODE);
+ outb_pit(0x38, PIT_MODE);
break;
case CLOCK_EVT_MODE_RESUME:
@@ -71,8 +71,8 @@
static int pit_next_event(unsigned long delta, struct clock_event_device *evt)
{
spin_lock(&i8253_lock);
- outb_p(delta & 0xff , PIT_CH0); /* LSB */
- outb(delta >> 8 , PIT_CH0); /* MSB */
+ outb_pit(delta & 0xff , PIT_CH0); /* LSB */
+ outb_pit(delta >> 8 , PIT_CH0); /* MSB */
spin_unlock(&i8253_lock);
return 0;
@@ -144,15 +144,15 @@
* count), it cannot be newer.
*/
jifs = jiffies;
- outb_p(0x00, PIT_MODE); /* latch the count ASAP */
- count = inb_p(PIT_CH0); /* read the latched count */
- count |= inb_p(PIT_CH0) << 8;
+ outb_pit(0x00, PIT_MODE); /* latch the count ASAP */
+ count = inb_pit(PIT_CH0); /* read the latched count */
+ count |= inb_pit(PIT_CH0) << 8;
/* VIA686a test code... reset the latch if count > max + 1 */
if (count > LATCH) {
- outb_p(0x34, PIT_MODE);
- outb_p(LATCH & 0xff, PIT_CH0);
- outb(LATCH >> 8, PIT_CH0);
+ outb_pit(0x34, PIT_MODE);
+ outb_pit(LATCH & 0xff, PIT_CH0);
+ outb_pit(LATCH >> 8, PIT_CH0);
count = LATCH - 1;
}
diff -u --new-file --recursive --exclude-from /usr/src/exclude
linux.vanilla-2.6.24-rc6-mm1/arch/x86/kernel/i8259_32.c
linux-2.6.24-rc6-mm1/arch/x86/kernel/i8259_32.c
--- linux.vanilla-2.6.24-rc6-mm1/arch/x86/kernel/i8259_32.c 2008-01-02
16:04:19.000000000 +0000
+++ linux-2.6.24-rc6-mm1/arch/x86/kernel/i8259_32.c 2008-01-11
15:11:24.000000000 +0000
@@ -289,20 +289,20 @@
outb(0xff, PIC_SLAVE_IMR); /* mask all of 8259A-2 */
/*
- * outb_p - this has to work on a wide range of PC hardware.
+ * outb_pic - this has to work on a wide range of PC hardware.
*/
- outb_p(0x11, PIC_MASTER_CMD); /* ICW1: select 8259A-1 init */
- outb_p(0x20 + 0, PIC_MASTER_IMR); /* ICW2: 8259A-1 IR0-7 mapped
to 0x20-0x27 */
- outb_p(1U << PIC_CASCADE_IR, PIC_MASTER_IMR); /* 8259A-1 (the master)
has a slave on IR2 */
+ outb_pic(0x11, PIC_MASTER_CMD); /* ICW1: select 8259A-1 init */
+ outb_pic(0x20 + 0, PIC_MASTER_IMR); /* ICW2: 8259A-1 IR0-7 mapped
to 0x20-0x27 */
+ outb_pic(1U << PIC_CASCADE_IR, PIC_MASTER_IMR); /* 8259A-1 (the master)
has a slave on IR2 */
if (auto_eoi) /* master does Auto EOI */
- outb_p(MASTER_ICW4_DEFAULT | PIC_ICW4_AEOI, PIC_MASTER_IMR);
+ outb_pic(MASTER_ICW4_DEFAULT | PIC_ICW4_AEOI, PIC_MASTER_IMR);
else /* master expects normal EOI */
- outb_p(MASTER_ICW4_DEFAULT, PIC_MASTER_IMR);
+ outb_pic(MASTER_ICW4_DEFAULT, PIC_MASTER_IMR);
- outb_p(0x11, PIC_SLAVE_CMD); /* ICW1: select 8259A-2 init */
- outb_p(0x20 + 8, PIC_SLAVE_IMR); /* ICW2: 8259A-2 IR0-7 mapped
to 0x28-0x2f */
- outb_p(PIC_CASCADE_IR, PIC_SLAVE_IMR); /* 8259A-2 is a slave on
master's IR2 */
- outb_p(SLAVE_ICW4_DEFAULT, PIC_SLAVE_IMR); /* (slave's support for AEOI
in flat mode is to be investigated) */
+ outb_pic(0x11, PIC_SLAVE_CMD); /* ICW1: select 8259A-2 init */
+ outb_pic(0x20 + 8, PIC_SLAVE_IMR); /* ICW2: 8259A-2 IR0-7 mapped
to 0x28-0x2f */
+ outb_pic(PIC_CASCADE_IR, PIC_SLAVE_IMR); /* 8259A-2 is a slave
on master's IR2 */
+ outb_pic(SLAVE_ICW4_DEFAULT, PIC_SLAVE_IMR); /* (slave's support for
AEOI in flat mode is to be investigated) */
if (auto_eoi)
/*
* In AEOI mode we just have to mask the interrupt
diff -u --new-file --recursive --exclude-from /usr/src/exclude
linux.vanilla-2.6.24-rc6-mm1/arch/x86/kernel/i8259_64.c
linux-2.6.24-rc6-mm1/arch/x86/kernel/i8259_64.c
--- linux.vanilla-2.6.24-rc6-mm1/arch/x86/kernel/i8259_64.c 2008-01-02
16:04:19.000000000 +0000
+++ linux-2.6.24-rc6-mm1/arch/x86/kernel/i8259_64.c 2008-01-11
15:11:55.000000000 +0000
@@ -359,25 +359,25 @@
outb(0xff, PIC_SLAVE_IMR); /* mask all of 8259A-2 */
/*
- * outb_p - this has to work on a wide range of PC hardware.
+ * outb_pic - this has to work on a wide range of PC hardware.
*/
- outb_p(0x11, PIC_MASTER_CMD); /* ICW1: select 8259A-1 init */
+ outb_pic(0x11, PIC_MASTER_CMD); /* ICW1: select 8259A-1 init */
/* ICW2: 8259A-1 IR0-7 mapped to 0x30-0x37 */
- outb_p(IRQ0_VECTOR, PIC_MASTER_IMR);
+ outb_pic(IRQ0_VECTOR, PIC_MASTER_IMR);
/* 8259A-1 (the master) has a slave on IR2 */
- outb_p(0x04, PIC_MASTER_IMR);
+ outb_pic(0x04, PIC_MASTER_IMR);
if (auto_eoi) /* master does Auto EOI */
- outb_p(MASTER_ICW4_DEFAULT | PIC_ICW4_AEOI, PIC_MASTER_IMR);
+ outb_pic(MASTER_ICW4_DEFAULT | PIC_ICW4_AEOI, PIC_MASTER_IMR);
else /* master expects normal EOI */
- outb_p(MASTER_ICW4_DEFAULT, PIC_MASTER_IMR);
+ outb_pic(MASTER_ICW4_DEFAULT, PIC_MASTER_IMR);
- outb_p(0x11, PIC_SLAVE_CMD); /* ICW1: select 8259A-2 init */
+ outb_pic(0x11, PIC_SLAVE_CMD); /* ICW1: select 8259A-2 init */
/* ICW2: 8259A-2 IR0-7 mapped to 0x38-0x3f */
- outb_p(IRQ8_VECTOR, PIC_SLAVE_IMR);
+ outb_pic(IRQ8_VECTOR, PIC_SLAVE_IMR);
/* 8259A-2 is a slave on master's IR2 */
- outb_p(PIC_CASCADE_IR, PIC_SLAVE_IMR);
+ outb_pic(PIC_CASCADE_IR, PIC_SLAVE_IMR);
/* (slave's support for AEOI in flat mode is to be investigated) */
- outb_p(SLAVE_ICW4_DEFAULT, PIC_SLAVE_IMR);
+ outb_pic(SLAVE_ICW4_DEFAULT, PIC_SLAVE_IMR);
if (auto_eoi)
/*
diff -u --new-file --recursive --exclude-from /usr/src/exclude
linux.vanilla-2.6.24-rc6-mm1/arch/x86/kernel/reboot_64.c
linux-2.6.24-rc6-mm1/arch/x86/kernel/reboot_64.c
--- linux.vanilla-2.6.24-rc6-mm1/arch/x86/kernel/reboot_64.c 2008-01-02
16:04:19.000000000 +0000
+++ linux-2.6.24-rc6-mm1/arch/x86/kernel/reboot_64.c 2008-01-11
15:15:42.000000000 +0000
@@ -79,9 +79,13 @@
{
int i;
- for (i=0; i<0x10000; i++)
- if ((inb_p(0x64) & 0x02) == 0)
+ for (i=0; i<0x10000; i++) {
+ if ((inb(0x64) & 0x02) == 0)
break;
+ udelay(10);
+ cpu_relax();
+ }
+ /* No delay on successful read, but this is done by caller */
}
void machine_shutdown(void)
diff -u --new-file --recursive --exclude-from /usr/src/exclude
linux.vanilla-2.6.24-rc6-mm1/arch/x86/kernel/vmiclock_32.c
linux-2.6.24-rc6-mm1/arch/x86/kernel/vmiclock_32.c
--- linux.vanilla-2.6.24-rc6-mm1/arch/x86/kernel/vmiclock_32.c 2008-01-02
16:04:19.000000000 +0000
+++ linux-2.6.24-rc6-mm1/arch/x86/kernel/vmiclock_32.c 2008-01-11
15:04:13.000000000 +0000
@@ -237,7 +237,7 @@
void __init vmi_time_init(void)
{
/* Disable PIT: BIOSes start PIT CH0 with 18.2hz peridic. */
- outb_p(0x3a, PIT_MODE); /* binary, mode 5, LSB/MSB, ch 0 */
+ outb_pit(0x3a, PIT_MODE); /* binary, mode 5, LSB/MSB, ch 0 */
vmi_time_init_clockevent();
setup_irq(0, &vmi_clock_action);
diff -u --new-file --recursive --exclude-from /usr/src/exclude
linux.vanilla-2.6.24-rc6-mm1/include/asm-x86/i8253.h
linux-2.6.24-rc6-mm1/include/asm-x86/i8253.h
--- linux.vanilla-2.6.24-rc6-mm1/include/asm-x86/i8253.h 2008-01-02
16:04:07.000000000 +0000
+++ linux-2.6.24-rc6-mm1/include/asm-x86/i8253.h 2008-01-11
15:26:10.000000000 +0000
@@ -12,4 +12,7 @@
extern void setup_pit_timer(void);
+#define inb_pit inb_p
+#define outb_pit outb_p
+
#endif /* __ASM_I8253_H__ */
diff -u --new-file --recursive --exclude-from /usr/src/exclude
linux.vanilla-2.6.24-rc6-mm1/include/asm-x86/i8259.h
linux-2.6.24-rc6-mm1/include/asm-x86/i8259.h
--- linux.vanilla-2.6.24-rc6-mm1/include/asm-x86/i8259.h 2008-01-02
16:04:25.000000000 +0000
+++ linux-2.6.24-rc6-mm1/include/asm-x86/i8259.h 2008-01-11
15:25:33.000000000 +0000
@@ -29,4 +29,7 @@
extern void disable_8259A_irq(unsigned int irq);
extern unsigned int startup_8259A_irq(unsigned int irq);
+#define inb_pic inb_p
+#define outb_pic outb_p
+
#endif /* __ASM_I8259_H__ */
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
