From: Rafał Miłecki <[email protected]> This loop requires variable initialization, stop condition and post iteration increment. It's pretty much a for loop definition.
Signed-off-by: Rafał Miłecki <[email protected]> --- drivers/firmware/broadcom/bcm47xx_nvram.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/drivers/firmware/broadcom/bcm47xx_nvram.c b/drivers/firmware/broadcom/bcm47xx_nvram.c index 09f51b95849e..1d2271b1e07a 100644 --- a/drivers/firmware/broadcom/bcm47xx_nvram.c +++ b/drivers/firmware/broadcom/bcm47xx_nvram.c @@ -93,15 +93,13 @@ static int bcm47xx_nvram_find_and_copy(void __iomem *flash_start, size_t res_siz } /* TODO: when nvram is on nand flash check for bad blocks first. */ - flash_size = FLASH_MIN; - while (flash_size <= res_size) { + for (flash_size = FLASH_MIN; flash_size <= res_size; flash_size <<= 1) { /* Windowed flash access */ size = find_nvram_size(flash_start + flash_size); if (size) { offset = flash_size - size; goto found; } - flash_size <<= 1; } /* Try embedded NVRAM at 4 KB and 1 KB as last resorts */ -- 2.26.2
